This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: AT91RM9200-EK Port
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Andrew Lunn <andrew at lunn dot ch>
- Cc: John Eigelaar <jeigelaar at yahoo dot co dot uk>,eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Sat, 02 Jul 2005 19:16:00 -0600
- Subject: Re: [ECOS] AT91RM9200-EK Port
- References: <pan.2005.06.27.07.57.10.794829@yahoo.co.uk> <20050627084143.GB11071@lunn.ch>
On Mon, 2005-06-27 at 10:41 +0200, Andrew Lunn wrote:
> On Mon, Jun 27, 2005 at 09:57:11AM +0200, John Eigelaar wrote:
> > Hi,
> >
> > I am just about to start a port of ECOS/Redboot for the Atmel
> > AT91RM9200-EK board. Before I go ahead and re-invent the the wheel, I
> > would like to find out whether anybody has done a port for this board ?
> >
> > Otherwise this AT91 is ARM920T based. Which of the current arm9 ports
> > would make the best starting point ?
>
> I guess most of the other AT91 ports are similar. Take a look at the
> AT91 variant HAL. It probably has most of what you need and all you
> have to write is something similar to the eb40 or eb55 HAL.
You may also be aware that there is a port for this chip available
from eCosCentric (it's not in the public tree at this time)
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss