This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: How program the Chip Slect on at91?
- From: Jani Monoses <jani at iv dot ro>
- To: ecos-discuss at sources dot redhat dot com
- Date: Wed, 03 Aug 2005 11:34:02 +0300
- Subject: [ECOS] Re: How program the Chip Slect on at91?
- References: <002201c59800$a11188b0$cda9fe90@emea.cisco.com>
Jaws wrote:
Hi all,
I'm trying to use an EB40A connected with an ethernet Chip CS8900A.
To interfacing them I'm using EBI expansion Bus and I connected the CS8900A
chip select to NCS1.
I have to program this chip select to remap my device to the address
0xf0000300.
How can I do this? What changes and where is the best place to insert this
changes?
Look at how the edb7xxx platfrom uses the generic cs8900 driver
devs/eth/arm/edb7xx.
make a similar package for your platform and include it in your build.
Jani
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss