[ECOS] debugging ecos on grg..

[<vijay dot peshkar at wipro dot com>]

Friends,

Thanks for the support. I could integrate the front end for coyote
and am now able to see grg on configtool. Had to update ecos.db and
cdl's for hal/, devs/flash & devs/eth along with some code in these
paths.

Next step for me would be to get a binary, download it on to the target
and
Debug its execution. 
Here I need some pointers. What tools are available for debugging ecos
startup - till the uart gets working?. Do I need an emulator or a pure
software tool is available?. 
 
Regards,
Vijay
 
 
------------------------
Vijay Kumar .P
Wipro Technologies,
Tel: 30295119
------------------------

-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of
vijay.peshkar@wipro.com
Sent: Friday, August 26, 2005 2:57 PM
To: ecos-discuss@sources.redhat.com
Subject: RE: [ECOS] ecos has template for coyote..?

David,

Thanks for the fast response. 
In my ecos 'configtool->build->templates->hardware'
am not seeing any hardware reference related to ixp425
processor. The closed hardware seems to be the 
'Intel Xscale IQ80310 board'. But then its not ixpdp425
you referred?.


Regards,
Vijay
 
 
------------------------
Vijay Kumar .P
Wipro Technologies,
Tel: 30295119
------------------------

-----Original Message-----
From: David Vrabel [mailto:dvrabel@arcom.com] 
Sent: Friday, August 26, 2005 2:40 PM
To: Vijay Kumar Peshkar (WT01 - Semiconductors & Consumer Electronics)
Cc: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] ecos has template for coyote..?

vijay.peshkar@wipro.com wrote:
> Dear Friends,
> 
> I have been using your coyote board with redbood and linux.
> Now I plan to migrate to ecos.
> 
> On running the latest 2.0 ecos configuration tool, I observed that
> there does not exist a template for IXP425 coyote while the 'supported
> hardware' list on ecos (http://ecos.sourceware.org/ecos/hardware.html)

> confirms that coyote and IXP425 processor is supported.
> Any pointers on how to get the support for coyote onto ecos
'configtool'?

I did this ages ago (and threw it all away since it I no longer had
access to Coyote hardware).  Basically you copy the ixpdp425 support and
change filenames/variable/function names and tweak a few other things.

I've attached the patches for Coyote support I still have lying around.
 I can't provide any further assistance beyond these patches.

David Vrabel
-- 
David Vrabel, Design Engineer

Arcom, Clifton Road           Tel: +44 (0)1223 411200 ext. 3233
Cambridge CB1 7EA, UK         Web: http://www.arcom.com/

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss