Hi,
We lost UDP frames in full Duplex and asynchronous Send/Receive mode but
not in
an Receive/Answer mode.
We tried 2 tests :
1) Synchronous mode : a PC send frames to the board every 20ms, and when
receiving a frame, the board send an answer frame. In this synchronous
configuration no problem was found. It works find !
2) Asynchronous mode : a board send frames to the PC every 20ms, and the
PC send
a frame every second without synchronisation on the reception.
As the frame contains an incremental counter, we add some tests in the
file
IF_FCC ("fcc_eth_int" and "fcc_eth_RxEvent" fonctions ) to detect a
missing
frame. Then we saw that we lost some frames. We are sure that the PC send
the
frame by analysing the communication with the Ethereal ethernet analyser.
We just tested it on a PowerPC board because we don't have other board.
Does someone ever find this kind of problem on an other board or have you
an
idea how to search an explanation ?
Thanks,
E. Coullien
NOTE : CE COURRIER ELECTRONIQUE EST DESTINE EXCLUSIVEMENT AU(X)
DESTINATAIRE(S) MENTIONNE(S) CI-DESSUS ET PEUT CONTENIR DES INFORMATIONS
PRIVILEGIEES, CONFIDENTIELLES ET/OU ET/OU NON SOUMISES A DIVULGATION AUX
TERMES DES LOIS APPLICABLES . SI VOUS AVEZ RECU CE MESSAGE PAR ERREUR ,
OU S'IL NE VOUS EST PAS DESTINE, VEUILLEZ LES SIGNALER IMMEDIATEMENT A
L'EXPEDITEUR ET EFFACER CE COURRIER ELECTRONIQUE.
NOTE: This e-mail message is intended only for the named recipient(s)
above and may contain information that is privileged, confidential and/or
exempt from disclosure under applicable law. If you have received this
message in error, or are not the named recipient(s), please immediately
notify the sender and delete this e-mail message.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss