This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: ixp42x NPE networking build issue.
- From: jerzy dyrda <jerzy dot dyrda at kontron dot pl>
- To: ecos-discuss at ecos dot sourceware dot org, Karel Gardas <kgardas at objectsecurity dot com>
- Date: Mon, 9 Jan 2006 11:07:05 +0100
- Subject: Re: [ECOS] ixp42x NPE networking build issue.
- References: <Pine.LNX.4.63.0512281749360.24952@silence.gardas.net> <Pine.LNX.4.63.0512282211140.24952@silence.gardas.net> <1135807232.6449.2.camel@sadr.localdomain>
Hello all,
On Wednesday 28 of December 2005 23:00, Mark Salter wrote:
> On Wed, 2005-12-28 at 22:13 +0100, Karel Gardas wrote:
> > I've also copied Jerzy's if_npe.c and now I'm fighting with various
> > compilation issues. Generaly Intel code's complaining about RebBoot not
> > enabled. Is RedBoot required for this to work? i.e. do I need to build my
> > NPE-enabled eCos app including RedBoot just to be able to build it?
>
> Hmm, Jerzy may have had to make changes in the Intel code to get it all
> to build. RedBoot isn't the solution.
>
Sorry, but I have had vacation.
I made some modification in Intel code ( very minor ) but without their npe
driver can't be compiled.
Regarding MAC address - I "ported" this driver to custom board with own mac
getting mechanism ( I have special function to do it) - please don't suggest
actual state of CONFIG_ESA - it is valid only for RedBoot.
Karel : I assume that you need to add some defines like DEBUG ( I made
mistake add counter - variable i - and forgot to remove, this problem appears
only when DEBUG is define ) or NPE_USE_INTS
( initially I tried to use suspended thread to pool dispatcherFunc() ) which
are added to cdl file.
Best Regards,
jerzy
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss