This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: eliminating redboot by including 'platform_setup' in default image?
- From: <vijay dot peshkar at wipro dot com>
- To: <andrew at lunn dot ch>
- Cc: <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 23 Feb 2006 14:19:34 +0530
- Subject: RE: [ECOS] eliminating redboot by including 'platform_setup' in default image?
Andrew,
Tried that. But then it had used flash addresses to run platform_setup
And executing this code by downloading failed.
Also, I do not have any tool to flash the image to flash(am using
multi-ice
and axd debugger). Any pointers?.
Finally it would not be a good idea to do bsp porting by flashing the
test images?.
Regards,
Vijay
------------------------
Vijay Kumar .P
Wipro Technologies,
Tel: 30295119
------------------------
-----Original Message-----
From: Andrew Lunn [mailto:andrew@lunn.ch]
Sent: Thursday, February 23, 2006 1:32 PM
To: Vijay Kumar Peshkar (WT01 - Semiconductors IP Solutions)
Cc: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] eliminating redboot by including 'platform_setup' in
default image?
On Thu, Feb 23, 2006 at 10:54:35AM +0530, vijay.peshkar@wipro.com wrote:
> Friends,
>
> Am trying to eliminate redboot in my BSP for ixp425.
> Plan to include the minimal boot code(PLATFORM_SETUP)
> into my vector.S for this purpose.
The correct way to do this is simply build you application with ROM
startup. No need to modify anything else.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss