This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
LPC2148 runtime problems
- From: Luis Lopes <luis at cincotech dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 14 Apr 2006 15:28:59 -0700
- Subject: [ECOS] LPC2148 runtime problems
Hi,
I've installed eCos on my Mac OS X system, and I am having problems
with the runtime image.
This is my setup:
MacOS X 10.4.6
binutils 2.16.1
gcc 4.1.0 or 4.0.3 (with Arm patches)
newlib 1.14.0 (with tweaks from http://
billgatliff.com/drupal/node/25 )
lpc21isp 1.3.7beta
eCos CVS as of Apr. 13, 2006 (with many fixes to update the old
configure files)
Olimex LPC-P2148 development board
Philips LPC2xxx patches from Hobby Robotics (thank you for the patches!)
I can build and run the example application: examples/hello.c
however, when I try the serial.c or twothreads.c things go wrong.
With twothreads.c, i see the "Entering twothreads' cyg_user_start()
function" and that's it.
For serial.c, I simply get "Found /dev/hald" and it stops.
I've tried gcc 4.1.0 and gcc 4.0.3 with no luck.
...
I also have a Linux system, and install the eCos package using the
eCos install script.
I copied over my eCos LPC2148 patches.
Using the GUI, I built the library.
The serial.c application works fine, however, the twothreads.c still
has the same issue.
...
I do know that the gcc 4.1.0 does build correct ARM images. I've
built the lpc2148_freertos
image and its runs fine. I have also built other lpc2148 applications
with no problems.
As eCos is quite large, there may be something i'm overlooking or gcc
4.x.x is doing
something bad to eCos.
Does any one have a clue as to what may be the problem that I'm
running into?
Could it be my *.ecc configuration?
Thanks,
luis...
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss