This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Bringing up a board with Timesys image
- From: "Steve Thomas" <sjthomas2 at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 17 Apr 2006 17:45:06 -0400
- Subject: [ECOS] Bringing up a board with Timesys image
Hello!! I am not sure if this is the correct forum for redboot.
But this group is what I found for discussing redboot issues.
I am trying to bring a board up that is running Timesys linux. I
assume that the CPU register values r0, r1 and r2 should match that of
the kernel that I am loading. I am very new to this. My board is based
on the IXDP425 architechture. I made sure I included the IXDP425
support while building the kernel. But my redboot hangs not
recognizing the uncompressed linux image that I transferred. How can I
make sure that the redboot has these values set correctly?
I haven't compiled the redboot myself.
What other things I might have to look at for bringing up the board.
Thanks in advance.
SThomas.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss