This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: Redboot available RAM


OK, now I understand, I had to select for GRUB startup... But what if I
want to boot form floppy????

Marcin

-----Original Message-----
From: Laurie Gellatly [mailto:laurie.gellatly@netic.com] 
Sent: 19 June 2006 09:41
To: Marcin Chrusciel; ecos-discuss@ecos.sourceware.org
Subject: RE: [ECOS] Redboot available RAM

Marcin,
I had a similar issue that I think I solved by checking on
CYGHWR_HAL_I386_PC_LOAD_HIGH (This option enables building RAM
applications which have a start address outside of the area used by
redboot_GRUB.) The other description says 'Load into higher memory
(2MB)'.

Have you tried that?

			...Laurie:{)

-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Marcin
Chrusciel
Sent: Monday, 19 June 2006 5:32 PM
To: ecos-discuss@ecos.sourceware.org
Subject: [ECOS] Redboot available RAM


I really stuck on this problem for i386 target. I've searched maillist
several times and found only this thread:

http://sourceware.org/ml/ecos-discuss/2006-04/msg00184.html

Which is about exactly the same problem as I have.

I tried also both types of discovering available RAM - bios and
hardcoding. No results. All I need is about 1MB for application...

Thanks in advance for any help

Marcin

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]