This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: eCos on MOAB Development Board


Evgeny Belyanco wrote:
Hi!

eCos is ported to MOAB Development Board. This is cool!
http://ecos.sourceware.org/ecos/boards/moab.html

As it has been for many years now :-) Be sure and use the latest CVS sources!


1. Is GDB debug over Ethernet supported for this port? Manufacturer's
doc describes only serial debug - that is strange...
http://www.tamsinc.com/3011/support/MOAB.tutorial.Rev4.pdf

Of course network debug is supported.


2. I found only this version of GNU tools for PowerPC powerpc-eabi
ftp://ecos.sourceware.org/pub/ecos/gnutools/cygwin/ecoscentric-gnutools-powerpc-eabi-1.4-2.cygwin.tar.bz2
ftp://ecos.sourceware.org/pub/ecos/gnutools/i386linux/ecoscentric-gnutools-powerpc-eabi-1.4-2.i386linux.tar.bz2


They are dated Feb 2003. Is it any fresh tools available?

Can I use this tools with modern CygWin release 1.5.20-1 (with proper config tools),
http://www.ecoscentric.com/devzone/configtool.shtml
or I must use old Cygwin from 2003?

The latest tools should work fine.


--
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]