This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
eCos application networking problem on ML403
- From: "Dogu Cetin" <dogu dot cetin at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 10 Aug 2006 16:10:50 +0300
- Subject: [ECOS] eCos application networking problem on ML403
- References: <efb454f30608100608u4695c361x85ca1279d55c9a16@mail.gmail.com>
Hi,
I'm quite new in eCos. I installed eCos using the following howto
(http://wwwcs.uni-paderborn.de/cs/ag-platzner/people/luebbers/stuff/ecos/ecos-ML403-miniHOWTO.txt
) and run redboot without network support (I don't know why) Now I'm
trying to run httpd1.c test software stand alone (without redboot) on
Xilinx ML403. I got evaluation licenses for ip of uart, ethernet, i2c.
I compiled ecos using config tool, my tamplete is v irtex4 and package
is net. Finally I got libextras.a, libtarget.a files and compiled
hhtpd1.c using these files. However when I run this software it gives
the same error (for both DHCP and static IP cases)
SIOCIFADDR: Device not configured
Network initialization failed for eth0
Probably I missed something, if you could help, I'll be pleased ...
Best regards,
Dogu Cetin
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss