This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Are the HALs in the eCos repository meant for deployment?
- From: "Øyvind Harboe" <oyvind dot harboe at zylin dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Sun, 13 Aug 2006 21:37:49 +0200
- Subject: [ECOS] Are the HALs in the eCos repository meant for deployment?
Are the HALs in the eCos repository meant for deployment?
I would expect the average PCB to be somewhat/quite similar to an
exisiting development board. I would *not* expect that the average
product(hardware/software) would use some HAL completely unmodified.
Rather than tweaking an existing HAL (often a couple of changes are
sufficient), I would recommend to copy the existing HAL to a seperate
repository(including the section in the ecos.db) and then placing that
HAL before the snapshot of the eCos CVS HEAD. Renaming the HAL,
although I would encourage it, isn't stricly required and probably not
a lot of effort to rename at some later stage.
--
Øyvind Harboe
http://www.zylin.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss