This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Port eCos Redboot Olimex LPC2294 to Embest LPCEB2000 (lpc2292)
- From: Miklos dot Pflancer at dBResearch dot co dot uk
- To: Sergei Gavrikov <sg at sgs dot gomel dot by>
- Cc: ecos-discuss at ecos dot sourceware dot org, Miklos <miklos at dbresearch dot co dot uk>
- Date: Mon, 18 Sep 2006 11:57:46 +0100
- Subject: Re: [ECOS] Port eCos Redboot Olimex LPC2294 to Embest LPCEB2000 (lpc2292)
- References: <008401c6d908$ade91fe0$6601a8c0@dadslaptop>
- Reply-to: Miklos dot Pflancer at dbresearch dot co dot uk
Hi Segei
Thanks for your help
I have taken your advice and used the olpch2294 as the base for my HAL port.
I have now got a Redboot prompt on my console. However I have the following error
+FLASH: driver init failed: Driver does not support device
Sorry, FLASH config exceeds available space in FIS directory
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 11:37:54, Sep 18 2006
Platform: Embest LPCEB2000 development board (ARM7TDMI)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited
RAM: 0x81000000-0x81080000, [0x81006f20-0x8107d000] available
FLASH: 0x00000000 - 0x1, 0 blocks of 0x00000000 bytes each.
RedBoot>
At the moment I only want to have driver support for the processors internal flash. How do I achieve this?
Best Regards
Miklos Pflancer
Electronics Engineer
--------------------------------------------------
email : miklos@dbresearch.co.uk
--------------------------------------------------
dB Research Ltd
Concept House
Merton Road
Bootle
Liverpool L20 3BG
UK
Tel (+44)(0)151 330 0800
Fax (+44)(0)151 330 0808
--------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss