This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: How to test ethernet connection?
- From: Gary Thomas <gary at mlbassoc dot com>
- To: David Luca <davidluca3000 at yahoo dot com>
- Cc: ecos-discuss <ecos-discuss at sourceware dot org>
- Date: Thu, 07 Dec 2006 05:47:36 -0700
- Subject: Re: [ECOS] How to test ethernet connection?
- References: <20061207124302.79430.qmail@web38701.mail.mud.yahoo.com>
David Luca wrote:
Hello,
I included the Cirrus Logic 8900 ethernet driver, everything compiled and starting the platform
shows me the following messages:
[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'cs8900a_eth0'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x082aab1c)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x082a9614)
New domain route at 0x00000000
[cyg_net_init] Init: call_route_init(0x00000000)
[cyg_net_init] Done
SYSTEM INITIALIZATION in progress
NETWORK:
BOOTP[eth0] op: REPLY
htype: Ethernet
hlen: 6
hops: 0
xid: 0x0
secs: 0
flags: 0x0
hw_addr: 00:23:31:36:00:01
client IP: 172.168.1.103
my IP: 172.168.1.103
server IP: 172.168.1.86
gateway IP: 172.168.1.1
options:
subnet mask: 255.255.255.0
IP broadcast: 172.168.1.255
gateway: 172.168.1.1
data index = 4
I assume it was initialized correctly, my question is, how can I test the ethernet connection
between host pc and target pc? I tried to use ping 172.168.1.103, but no response (I must mention
that I download the eCos application to the target via FTP, using MicroMonitor, so I know ethernet
is working).Thank you in advance,
David Luca.
What program gave you this output?
You could try to build & run one of the network tests, e.g.
'ping_test' to verify your hardware. Here's how I do it:
% ecosconfig new <platform> net
% ecosconfig tree
% make -s
% make -C net/common/current tests TESTS=tests/ping_test
This will build just the one test which you can then download and run.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss