This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Again with AT91SAM7X-EK
Scrive Andrew Lunn <andrew@lunn.ch>:
> > -I- Send File M:/main.bin at address 0x100000
> > -I- File size = 24820 byte(s)
> > (Desktop) 1 % eval FLASH::ScriptGPNMV 4
> > -I- Boot from Flash selected
>
> The address is O.K.
>
> So try one of the standard tests and see if it outputs anything on the
> serial ports. 38400 baud. I think the DBG port is used by default, but
> i could be wrong.
>
> Andrew
>
Hooray! it works, i tried with several test and all off them pass and output on
dbgu port at 38400baud.
Maybe then i'm doing something wrong in compilation? i've used Build_makefile to
generate the makefile.
however i'll take a look at the tests code.
Thanks again
Andrea
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss