This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Redboot initialize database error
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Tales Toledo wrote:
> Hi,
>
> I did it but I have the same problem.
Don't top post :-(
Did you verify that it wrote anything to your FLASH?
What do you see when you run 'fis list'?
>
> ---------------------------
> **Warning** FLASH configuration checksum error or invalid key
> Use 'fconfig -i' to [re]initialize database
> ** FEC Info: PHY LINK already UP
> ... waiting for BOOTP information
> Ethernet eth0: MAC address 7c:71:43:a6:7c:92
> Can't get BOOTP info for device!
>
> RedBoot(tm) bootstrap and debug environment [ROM]
> Non-certified release, version UNKNOWN - built 17:03:31, Jun 22 2007
>
> Platform: MPC880 (PowerPC 880)
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited
>
> RAM: 0x00000000-0x02000000, [0x0001b040-0x01fe1000] available
> FLASH: 0x40000000 - 0x40800000, 128 blocks of 0x00010000 bytes each.
> RedBoot> fconfig -i
> Initialize non-volatile configuration - continue (y/n)? y
> Run script at boot: false
> Use BOOTP for network configuration: false
> Gateway IP address: 0.0.0.0
> Local IP address: 192.168.0.100
> Local IP address mask: 255.255.255.0
> Default server IP address: 192.168.0.1
> DNS domain name: <Not a string: 0x1FE32F5>
> DNS server IP address: 192.168.0.4
> Network hardware address [MAC]: 0x7C:0x71:0x43:0xA6:0x7C:0x92
> GDB connection port: 9000
> Force console for special debug messages: false
> Network debug at boot time: false
> Update RedBoot non-volatile configuration - continue (y/n)? y
> ... Erase from 0x407f0000-0x40800000: .
> ... Program from 0x01ff0000-0x02000000 at 0x407f0000: .
> RedBoot> reset
> ... Resetting.ï+**Warning** FLASH configuration checksum error or
> invalid key
> Use 'fconfig -i' to [re]initialize database
> ** FEC Info: PHY LINK already UP
> ... waiting for BOOTP information
> Ethernet eth0: MAC address 7c:71:43:a6:7c:92
> Can't get BOOTP info for device!
>
> RedBoot(tm) bootstrap and debug environment [ROM]
> Non-certified release, version UNKNOWN - built 17:03:31, Jun 22 2007
>
> Platform: MPC880 (PowerPC 880)
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited
>
> RAM: 0x00000000-0x02000000, [0x0001b040-0x01fe1000] available
> FLASH: 0x40000000 - 0x40800000, 128 blocks of 0x00010000 bytes each.
> RedBoot>
> ---------------------------
>
> I will also attach an excerpt from redboot_ROM.ecm with REDBOOT
> options for reference. I'm building with ecosconfig new redboot
> platform and after that I import redboot_ROM.ecm
>
> ---------------------------
> cdl_option CYGSEM_HAL_ROM_MONITOR {
> inferred_value 1
> };
>
> cdl_component CYG_HAL_STARTUP {
> user_value ROM
> };
>
> cdl_component CYGBLD_BUILD_REDBOOT {
> user_value 1
> };
>
> cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
> user_value 0x00030000
> };
>
> cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
> user_value 0
> };
>
> cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
> user_value 1
> };
>
> ---------------------------
> Thx again
> TT.
>
> On 6/27/07, Gary Thomas <gary@mlbassoc.com> wrote:
> Tales Toledo wrote:
>> Hi,
>
>> seems that fconfig commands doesn't write the configuration variables
>> to database (bootp false in particular). As you can see in the
>> following lines after reset the database comes to initial state (bootp
>> = true).
>
>> I check the list but I didn't find a similar case.
>
>> Does anybody have a similar problem?
>
>> -----------------------------------------------------
>
>> **Warning** FLASH configuration checksum error or invalid key
>> Use 'fconfig -i' to [re]initialize database
>> ** FEC Info: PHY LINK already UP
>> ... waiting for BOOTP information
>> Ethernet eth0: MAC address 7c:71:43:a6:7c:92
>> Can't get BOOTP info for device!
>
>> RedBoot(tm) bootstrap and debug environment [ROM]
>> Non-certified release, version UNKNOWN - built 17:03:31, Jun 22 2007
>
>> Platform: MPC880 (PowerPC 880)
>> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>> Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited
>
>> RAM: 0x00000000-0x02000000, [0x0001b040-0x01fe1000] available
>> FLASH: 0x40000000 - 0x40800000, 128 blocks of 0x00010000 bytes each.
>> RedBoot> fis init
>> About to initialize [format] FLASH image system - continue (y/n)? y
>> *** Initialize FLASH Image System
>> ... Erase from 0x407f0000-0x40800000: .
>> ... Program from 0x01ff0000-0x02000000 at 0x407f0000: .
>> RedBoot> fconfig -l -n
>> boot_script: false
>> bootp: true
>> bootp_server_ip: 0.0.0.0
>> dns_domain: <Not a string: 0x1FE32F5>
>> dns_ip: 0.0.0.0
>> fec_esa: 0x7C:0x71:0x43:0xA6:0x7C:0x92
>> gdb_port: 9000
>> info_console_force: false
>> net_debug: false
>> RedBoot> fconfig
>> Run script at boot: false
>> Use BOOTP for network configuration: false
>> Gateway IP address: 0.0.0.0
>> Local IP address: 192.168.0.100
>> Local IP address mask: 255.255.255.0
>> Default server IP address: 192.168.0.1
>> DNS domain name: <Not a string: 0x1FE32F5>
>> DNS server IP address: 192.168.0.4
>> Network hardware address [MAC]: 0x7C:0x71:0x43:0xA6:0x7C:0x92
>> GDB connection port: 9000
>> Force console for special debug messages: false
>> Network debug at boot time: false
>> Update RedBoot non-volatile configuration - continue (y/n)? y
>> ... Erase from 0x407f0000-0x40800000: .
>> ... Program from 0x01ff0000-0x02000000 at 0x407f0000: .
>> RedBoot> fconfig -l -n
>> boot_script: false
>> bootp: false
>> bootp_my_gateway_ip: 0.0.0.0
>> bootp_my_ip: 192.168.0.100
>> bootp_my_ip_mask: 255.255.255.0
>> bootp_server_ip: 192.168.0.1
>> dns_domain: <Not a string: 0x1FE32F5>
>> dns_ip: 192.168.0.4
>> fec_esa: 0x7C:0x71:0x43:0xA6:0x7C:0x92
>> gdb_port: 9000
>> info_console_force: false
>> net_debug: false
>> RedBoot> reset
>> **Warning** FLASH configuration checksum error or invalid key
>> Use 'fconfig -i' to [re]initialize database
>> ** FEC Info: PHY LINK already UP
>> ... waiting for BOOTP information
>> Ethernet eth0: MAC address 7c:71:43:a6:7c:92
>> Can't get BOOTP info for device!
>
>> RedBoot(tm) bootstrap and debug environment [ROM]
>> Non-certified release, version UNKNOWN - built 17:03:31, Jun 22 2007
>
>> Platform: MPC880 (PowerPC 880)
>> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>> Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited
>
>> RAM: 0x00000000-0x02000000, [0x0001b040-0x01fe1000] available
>> FLASH: 0x40000000 - 0x40800000, 128 blocks of 0x00010000 bytes each.
>> RedBoot>
>
>
> Follow the directions :-) You need to run 'fconfig -i' - this command
> is independent of 'fis init' although they both "initialize" FLASH (in
> different ways)
>
>
>>
- --
- ------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
- ------------------------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFGgtSgmaKbSsQGV8ARAmjHAJ42h7IqLp0EtWzgHJbIkWD0z/hGkwCglWVE
p+ugMPQvdvAHs+MKMHLvhTI=
=BFH6
-----END PGP SIGNATURE-----
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss