This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Recommendation on Evaluation boards
- From: Ilija Koco <ilijak at siva dot com dot mk>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Wed, 04 Jul 2007 17:42:56 +0200
- Subject: Re: [ECOS] Recommendation on Evaluation boards
- References: <950474.58346.qm@web53101.mail.re2.yahoo.com>
eCos is ported to some automotive platforms such as Freescale's MPC500
and MAC7100.
Here you will find info of some supported hardware.
Best regards
Ilija
Klaus Nji wrote:
> Any additional piece of information will be of help.
>
> I am currently looking for an Evaluation board for an automotive application.
>
> I have looked at the list currently listed on eCosCentric but could use some additional advice or recommendations based on recent experiences. I want to minimize running into technical difficulties arising from incompatibility issues given my limited resources.
>
> As of now, hardware requirements are:
>
> • 32 or 64 bit CPU (CPU speed not crucial as time fastest dynamic is 1s).
> • Low Power Consumption or Sleep Mode capability
> • Expandable Flash Memory for field upgrade of firmware
> • 3x RS-232
> • CAN interface
> • 1 Audio/Video
> • 1 USB 2.0 port (not mandatory)
> • Couple of analog and digital I/O
> • eCos recently ported onto board with minimal technical difficulties.
>
> Again, any advice from recent experiences will be greatly appreciated.
>
> Thanks in advance,
>
>
> Klaus
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss