This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
dhcp fails on second ethernet port
- From: "Daniel Paape" <dpaape at amtelco dot com>
- To: <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 6 Jul 2007 11:36:21 -0500
- Subject: [ECOS] dhcp fails on second ethernet port
Hello,
I'm running eCos2.1 on a MIPS variant (w/ bsd_tcip) and am having some trouble getting the second Ethernet port to configure via DHCP.? Both ports are connected to the same switch.? Eth0 has a statically configured (10.9.8.188) address while eth1 is set to configure from a DHCP server providing 192.168.20.x addresses.? If I reverse the assignments (eth0 DHCP & eth1 static) the ports work fine.? I am not calling 'init_all_networks()' rather, I call (what I believe to be) the common init code 'cyg_net_init()' and then by way of two threads each associated with a specific port, " call 'dhcp_config(port)' or 'init_net("ethx", &bootp_data)'.
When the second port attempts DHCP, the DISCOVER packets never make it out onto the wire, which I believe is due to the variable 'isbcast' in the 'ip_output routine evaluating to zero as a consequence of the RTF_HOST flag being set.? It's as if -any- established route interferes with subsequent DHCP configuration.
Does anyone have any idea as to what might be occurring?
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss