This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Adding PCI eth pro100 for testing new port to MPC8313 RDB
- From: Oscar Gueta <ogueta at yahoo dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 1 Nov 2007 19:22:13 -0700 (PDT)
- Subject: [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB
Hello all,
In order to fully test the new PCI HAL for
Freescale's MPC8313 RDB I added an Intel PCI ethernet
(pro100) to the source tree as follows under
packages/devs/eth/powerpc/rdb/i82559/current/cdl:
cdl_package CYGPKG_DEVS_ETH_RDB_I82559 {
display "RDB pci intel i82559 ethernet
driver"
description "Ethernet driver for RDB pci intel
i82559."
parent CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_HAL_POWERPC_RDB
include_dir cyg/io
# FIXME: This really belongs in the INTEL_I82559
package
cdl_interface
CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED {
display "Intel i82559 ethernet driver
required"
}
define_proc {
puts $::cdl_system_header "/***** ethernet
driver proc output start *****/"
puts $::cdl_system_header "#define
CYGDAT_DEVS_ETH_INTEL_I82559_INL
<cyg/io/devs_eth_rdb_i82559.inl>"
puts $::cdl_system_header "#define
CYGDAT_DEVS_ETH_INTEL_I82559_CFG
<pkgconf/devs_eth_rdb_i82559.h>"
puts $::cdl_system_header "/***** ethernet
driver proc output end *****/"
}
.....
I also added a new target to ecos.db in order to
insert the pro100 driver as follows:
package CYGPKG_HAL_POWERPC_RDB {
alias { "FreeScale MPC83xxRDB"
hal_powerpc_rdb powerpc_rdb_hal }
directory hal/powerpc/rdb
script hal_powerpc_rdb.cdl
hardware
description "
The RDB HAL package provides the support
needed to run
eCos on a FreeScale MPC83xx RDB board."
}
target rdb_pr100 {
alias { "FreeScale MPC83xx RDB board
with pro100" }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC831X
CYGPKG_HAL_POWERPC_RDB
CYGPKG_IO_SERIAL_POWERPC_MPC831X
CYGPKG_IO_PCI
CYGPKG_IO_ETH_DRIVERS
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_DEVS_ETH_RDB_I82559
}
description "FreeScale MPC83xx RDB board with
pro100"
}
I created a Redboot minimal configuration, and is
defined as follows:
cdl_configuration eCos {
description "" ;
hardware rdb ;
template redboot ;
package -hardware CYGPKG_HAL_POWERPC current ;
package -hardware CYGPKG_HAL_POWERPC_MPC831X
current ;
package -hardware CYGPKG_HAL_POWERPC_RDB current ;
package -hardware
CYGPKG_DEVS_FLASH_POWERPC_RATTLER current ;
package -hardware CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
current ;
package -hardware CYGPKG_IO_PCI current ;
package -hardware CYGPKG_IO_ETH_DRIVERS current ;
package -hardware CYGPKG_DEVS_ETH_INTEL_I82559
current;
package -hardware CYGPKG_DEVS_ETH_RDB_I82559
current ;
package -template CYGPKG_HAL current ;
package -template CYGPKG_INFRA current ;
package -template CYGPKG_REDBOOT current ;
package -template CYGPKG_ISOINFRA current ;
package -template CYGPKG_LIBC_STRING current ;
package -template CYGPKG_CRC current ;
package CYGPKG_NS_DNS current ;
package CYGPKG_IO_FLASH current ;
};
Without importing the RedBoot, everything
compiles OK. I can see the ethernet driver compiling.
The problem is when Redboot minimal configuration is
imported and tried to be compiled, there are pci
library routines unresolved:
powerpc-eabi-gcc -msoft-float -mcpu=603e -g -nostdlib
-Wl,--gc-sections -Wl,-static
-L/root/ecos/projects/pcieth/pcieth_install/lib
-Ttarget.ld -o
/root/ecos/projects/pcieth/pcieth_install/bin/redboot.elf
/root/ecos/projects/pcieth/pcieth_install/lib/version.o
make[1]: Leaving directory
`/root/ecos/projects/pcieth/pcieth_build/redboot/current'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `rity':
make: Leaving directory
`/root/ecos/projects/pcieth/pcieth_build'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0xbc):
undefined reference to `cyg_pci_init'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `CYG_WORD64':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0xf8):
undefined reference to `cyg_pci_find_matching'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `_callbacks':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x128):
undefined reference to `cyg_pci_get_device_info'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `yg_flag_t':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x13c):
undefined reference to `cyg_pci_translate_interrupt'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `83xx_t':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x15c):
undefined reference to `cyg_pci_configure_device'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `riority':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x29c):
undefined reference to `cyg_pci_read_config_uint16'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `11ddr_cs_bndsaSERKS_':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x2b8):
undefined reference to `cyg_pci_write_config_uint16'
collect2: ld returned 1 exit status
make[1]: ***
[/root/ecos/projects/pcieth/pcieth_install/bin/redboot.elf]
Error 1
I am completely lost here as in cdl files and in ecm
file PCI is included (I am also positive that library
is compiling and working as far as I can test). Does
anybody have a clue how to fix this code without
making dirty changes in the ethernet driver source
code or makefiles to force the compilation?
Thanks in advance.
/Oscar
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss