This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: General Reboot questions
- From: Andrew Lunn <andrew at lunn dot ch>
- To: Hendrik Meiring <hmeiring at gmail dot com>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 12 Nov 2007 10:48:39 +0100
- Subject: Re: [ECOS] General Reboot questions
- References: <000001c8250d$5fe5aff0$d121d0c4@roftie>
On Mon, Nov 12, 2007 at 11:20:58AM +0200, Hendrik Meiring wrote:
> Hi,
>
> Through the redboot documentation I understand that only the Flash, serial
> and ethernet drivers are "supported". Is this due to the fact that the CLI
> only makes provision for these or is there another reason.
For a boot loader that is about all you need.
> Would it be possible without too much effort to add a CAN driver with
> entries in the vvt for other applications to use, or will redboot have a
> probem with it.
I believe Uwe Kindler has integrated CAN with redboot. However i don't
know the details.
What exactly do you want to do? Make the console work over CAN instead
of RS232?
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss