Re: [ECOS] Redboot v2.04, IXP4XX and Flash v2

["Tom Deconinck" <t dot deconinck at gmail dot com>]

Hi,

The eCos Flash v2 code is in a separate repository. It's probably best
to start from the latest of the trunk from ecos.sourceware.org

You just have to replace the following directories with the ones from
the flash v2 branch:
io/flash
dev/flash
redboot
fs/jffs2
Using the flash v2 branch will make it possible to use 2 flashes.

Tom

On Feb 4, 2008 1:51 PM, Antonello Lombardinilo <antonello@kasko.it> wrote:
> Hi all,
>
> I developed board based on Intel IXP435 Multi-Service
> Residential Gateway Reference Platform (KIXRP435).
>
> Main difference is that my board have a 2 flash chip:
> a 512 Kbytes boot flash and 16 Mbytes NAND flash.
>
> I succesfully ported Redboot v.2.04 with boot flash and
> npe support on my board.
> Now I would also manage NAND flash with FIS.
> I readed about eCos/Redboot Flash V2 API, but I'am
> confused because the Redboot src that I use are from
> RedHat ftp source and not from ecos repository.
>
> Can someone suggest me how go ahead ?
>
>  Antonello
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss