This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Redboot v2.04, IXP4XX and Flash v2


Hi,

Flash V2 board driver should use "CYG_FLASH_DRIVER" macro to define each
flash device. Just find this macro.

grep -R CYG_FLASH_DRIVER ./

But are you sure that you need two flash device support?
What are you going to keep in boot flash (512 KB)?

Best regards
Alexey Shusharin

Hi,

I would use the boot flash for RedBoot Image, FIS directory and
Redboot config.

I'm not sure that I need a two flash device support.
Any other solution is well appreciated. 

Best Regards,
Antonello

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]