This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Redboot v2.04, IXP4XX and Flash v2
Alexey Shusharin writes:
. ..., 06/02/2008 . 08:51 +0100, Antonello Lombardinilo .....:
>
> Hi,
>
> Flash V2 board driver should use "CYG_FLASH_DRIVER" macro to define each
> flash device. Just find this macro.
>
> grep -R CYG_FLASH_DRIVER ./
>
> But are you sure that you need two flash device support?
> What are you going to keep in boot flash (512 KB)?
>
> Best regards
> Alexey Shusharin
>
Hi,
I would use the boot flash for RedBoot Image, FIS directory and
Redboot config.
I'm not sure that I need a two flash device support.
Any other solution is well appreciated.
Are you going to use FIS on the second flash device? If yes you can keep
Redboot config there and don't make access to boot flash device. It's
usual way.
Best regards
Alexey Shusharin
Hi,
I would to use second flash for zImage, ramdisk and linux jffs2.
So, if I understood correctly, I want to use FIS on second device.
In this scenario, why redboot don't make access to boot flash ?
Where the Redboot image are stored ?
How can update Redboot ?
There is any board that implement this scenario?
Best Regards,
Antonello Lombardinilo
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss