This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Using S3CEB2410 evaluation board
- From: Andrew Lunn <andrew at lunn dot ch>
- To: J?r?my Alles <jeremy dot alles at orange-ftgroup dot com>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Tue, 26 Feb 2008 14:30:10 +0100
- Subject: Re: [ECOS] Using S3CEB2410 evaluation board
- References: <200802261119.m1QBJ5DB014636@smtp.silicomp.fr>
On Tue, Feb 26, 2008 at 12:19:03PM +0100, J?r?my Alles wrote:
> Hi,
>
> I?d like to use the S3CEB2410 evaluation board
> (http://www.armkits.com/product/s3ceb2410.asp) with eCos and Redboot.
> I saw that the SMDK2410 board is fully supported by eCos.
>
> Do you think it?ll be a hard work to make it works with the S3CEB2410 board
> ?
I don't think it will be two difficult. The FLASH is different, the
SMDK2410 appears to have an AM29 devices, where as the s3ceb2310 has a
strata. So you will need to write a new hardware specific flash
driver. However there are plenty of examples for the strata device.
There are lots of devices that the SMDK2410 does not have drivers
for. If you need any of these, that will be the harder part, eg
ethernet, USB host and device, MMC, I2C etc.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss