This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

boot_table

From: "Pazos Escudero Nuria" <Nuria dot PazosEscudero at he-arc dot ch>
To: <ecos-discuss at ecos dot sourceware dot org>
Date: Thu, 16 Oct 2008 11:23:07 +0200
Subject: [ECOS] boot_table

Hi!

I've ported eCos and RedBoot for a proprietary platform comprising the AT91M55800A processor a SRAM and three S29AL016D90TFI02 flash modules. I can boot from the RAM and I see both, the RAM and the Flash. But I have not yet managed to make it boot from the flash pointed by CS0 (where I previously flashed the ROM Redboot configuration at the bottom address). Is there any file within eCos to set the parameters of the boot table in order to tell from which address to boot?

Thanks in advance!

Meillleures salutations, Schöne Grüsse, Best regards,
Nuria Pazos, PhD.


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Follow-Ups:
- Re: boot_table
  - From: Andrew Lunn

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]