This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Redboot hung after fconfig update (y/n)? y
- From: Gary Thomas <gary at mlbassoc dot com>
- To: krjaz at yahoo dot com
- Cc: eCos Disuss <ecos-discuss at ecos dot sourceware dot org>
- Date: Tue, 25 Nov 2008 04:58:37 -0700
- Subject: Re: [ECOS] Redboot hung after fconfig update (y/n)? y
- References: <973638.4419.qm@web110412.mail.gq1.yahoo.com>
krj wrote:
>
> I am using Micron DDR MT46H32M32LF on i.mx31 platform. After running redboot, I am seeing a hang after the following message:
>
> Update RedBoot hon-volatile configuration - continue (y/n)? y
> "... Read from 0x07ee0000-0x07eff000 at 0x000800000: . "
Very little to go on and oh, so many possibilities...
First of all, this platform is not in the public tree, so there's
not much we can say about it. You probably need to talk to
FreeScale about your issues.
Also, this device is NAND (hence the 'Read from' message)
which also complicates life. Is it the same device as what
the [default] FreeScale platform uses?
Finally, you didn't say if the FLASH functions work at all.
For example, can you run 'fc -l' or 'fi li' or 'fi cr'?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss