This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Re: Re: error generated during stub build
- From: Sergei Gavrikov <sg at belvok dot com>
- To: abhishek srivastava <just_abhi22 at yahoo dot co dot in>
- Cc: ecos-discuss at sourceware dot org
- Date: Thu, 27 Nov 2008 16:06:41 +0200
- Subject: Re: [ECOS] Re: Re: error generated during stub build
- References: <680354.8394.qm@web94604.mail.in2.yahoo.com>
On Thu, Nov 27, 2008 at 07:07:10PM +0530, abhishek srivastava wrote:
>
>
>
> --- On Thu, 27/11/08, abhishek srivastava <just_abhi22@yahoo.co.in> wrote:
>
> > From: abhishek srivastava <just_abhi22@yahoo.co.in>
> > Subject: Re: error generated during stub build
> > To: "Simon Kallweit" <simon.kallweit@intefo.ch>
> > Date: Thursday, 27 November, 2008, 6:56 PM
> > thanks for ur quick reply, bt if u cud look at this link
> > (http://www.ecoscentric.com/ecospro/doc.cgi/html/ecospro-ref/arm-lpc2xxx-ea-quickstart.html),
> > it sayd that redbot have larger image compared to stub.
> >
> > now,wht u say, and what shud i do
> >
Bad quote. Read the below
On LPC2xxx variants with less than 64KBytes SRAM, such as the 32KBytes
on the LPC2148, it is typically expected that standalone applications
will be programmed directly to on-chip Flash, either using a hardware
JTAG/ICE unit via the QuickStart Prototype Board, or by serial using the
on-chip In-System Programming (ISP) mechanism included with NXP LPC2xxx
microcontrollers and a suitable host application running on a PC.
Sergei
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss