This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
CAN-problems
- From: Peter Last NameHuszar <duci750 at yahoo dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 22 Dec 2008 14:25:18 -0800 (PST)
- Subject: [ECOS] CAN-problems
I have just started to use eCOS for an Olimex LCP-H2294.
The basic setup works, I could flash led as a thread, using Redboot ROM monitor,
but ran into problem when adding CAN support.
I modified the ecos.db to include the generic CAN device driver and the LPC2xxx
specific CAN device driver.
First of all, in "I/O subsystem/CAN device drivers/Philips LPC2xxx CAN.."
set up the? "Allow Access to the on-chip CAN 0 .." is selected, but grey.
More importantly some defines are not set properly e.g. CYGINT_IO_CAN_CHANNELS
does not seem to have the proper count.
Since I am a novice with eCOS, I might be doing something simple the wrong way.
I have not found any solution for my problem in the archives. Would appreciate some
help.
Rgds,
Peter
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss