This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Modifications to to ADC LPC24xx
- From: Uwe Kindler <uwe_kindler at web dot de>
- To: ecos-discuss at sourceware dot org
- Cc: duci750 at yahoo dot com
- Date: Tue, 23 Dec 2008 23:07:50 +0100
- Subject: [ECOS] Re: Modifications to to ADC LPC24xx
Hello Peter,
I've created the LPC24xx ADC driver. There are some differences between
the older LPC2xxx ADC layout and between the newer LPC24xx and LPC23xx
ADC peripheral. You should check if this driver is applicable for
LPC2xxx variants with minor modifications. If the driver works also for
LPC2xxx variants then you can provide a patch that converts the LPC24xx
ADC driver into a generic LPC2xxx ADC driver.
I've also created the LPC2xxx CAN driver an also used this driver with
the Olimex LPC2294 header board. So if you have further questions
regarding the CAN drive you can contact me.
Regards, Uwe
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss