This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: Help on at91sam7se512
- From: "Davies, Greg" <Greg dot Davies at Ultra-UEMS dot com>
- To: <natarajsn at gmail dot com>
- Cc: <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 21 Jan 2009 16:22:22 -0400
- Subject: [ECOS] RE: Help on at91sam7se512
Hi, I added the ecos list to the CC so that everyone can
share. I actually used the at91sam7se256 target (or maybe it
was sam7s) to get things up and running. I just wrote a flash
driver to use the second flash bank.
One thing you might want to try if you're using the graphical
config tool is to clean things out between builds. It takes a
long time at first, but it can prevent problems that can take
up a lot more time. I found ecos builds differently depending
on the order in which you select the options.
Depending on which email of mine you read, it could be an
unrelated issue. I didn't have the right hardware on the
board for the pll, so I was getting all kinds of awesome
problems. (I'm strictly software, and this was my first
embedded project so don't laugh that hard.)
I can't be much more help than that with the info you gave,
since I didn't use redboot at all. If you can reply-all with
a little more detail on this problem, I'm sure someone can help.
> -----Original Message-----
> From: natarajsn@gmail.com [mailto:natarajsn@gmail.com]
> Sent: Wednesday, January 21, 2009 7:03 AM
> To: Davies, Greg
> Subject: Help on at91sam7se512
>
> Hi Davies
>
> I am having same kind of troubles while trying to get Ecos
working on
> at91sam7se512.
> Except for Redboot.bin, I am unable to execute any of the examples,
> even a Hello World.
>
> There seems to be no specific Target for at91sam7se512 in
Ecosconfig.
> Have you been able to fix the issues? Can you help me with this ?
>
> regards
>
> Nataraj S Narayan
> India
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss