This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: Help on at91sam7se512
- From: "Davies, Greg" <Greg dot Davies at Ultra-UEMS dot com>
- To: "Nataraj S Narayan" <natarajsn at gmail dot com>
- Cc: <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 22 Jan 2009 08:50:40 -0400
- Subject: [ECOS] RE: Help on at91sam7se512
- References: <19571192.1866411232535775094.JavaMail.nabble@isper.nabble.com> <A25DBA3B0717824BAFD61F81242D5DBD0234532C@exchange.Ultra-UEMS.ca> <630286c70901212137q19236e2cvc14e86932764c54c@mail.gmail.com>
- Reply-to: <ecos-discuss at ecos dot sourceware dot org>
> Which tool chain are you using? I have tried with both
> arm-elf- and arm-none-eabi-.
I used an arm-elf toolchain.
> I have tried both graphic as well ecosconfig tools to get going.
> In graphic tool I go for ARM architecture HAL package->AT91SAM7S
> variant->AT91SAM7s256. I am not able to set the variant specific to
> at91sam7se512, because unresolved conflicts pops up, i f I
> give 'ignore' the tree isnt built.
Clean out everything that ecos has built, and try different starting
setups. Find one that builds with no changes, and go from there.
> Is it that at91sam7se512 is not supported yet?
The e in sam7se isn't supported.
> Please give me the mailing list Id.
I don't remember how I got on the list, but the information is on the
website somewhere.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss