This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: i made progresses but now got confused.


On Fri, Jun 26, 2009 at 03:29:58PM +0800, wb ning wrote:
> Hi, all
> i used at91sam7s. Since i can't run the examples in the ecos examples
> directory. That means when i compile and link and got the hello.elf
> and then download it to flash. After restart the board, no message
> displayed on the hyperterminal.

Are you using the correct serial port? I think it defaults to the DBG
serial port, 38400 baud. But i could be wrong. Try them all.

       Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]