This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Problem executing anything on IXP425 based board, redboot is the bootloader
- From: Ajit Mittal <ajitmittal at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Wed, 19 Aug 2009 14:37:42 -0400
- Subject: [ECOS] Problem executing anything on IXP425 based board, redboot is the bootloader
Ihave a board with total RAM of 32 MB, 2 chips of 16 MB each. It has
8 MB flash.
It has redboot bootloader and platform is IXP425 processor
Booting is fine. I am able to load the program fine to memory but
executing gives me an error grabage output on serial output after
executing go or exec command like this
"$T050f:01000000;0d:01fc0fec;#d6". I think memory/interrupt of
the board is bad. How to test RAM.
If suppose RAM is bad. Is it possible to modify redboot and burn it again and
then use only 16MB RAM.If yes how to do that or how to troubleshoot.
Thanks
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss