This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: How to set GDB Stub Options in order to run insight ?
- From: John Dallaway <john at dallaway dot org dot uk>
- To: m mariga <ma_ariga at yahoo dot co dot jp>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 04 Sep 2009 10:37:47 +0100
- Subject: [ECOS] Re: How to set GDB Stub Options in order to run insight ?
- References: <3100D422DF3A4D7B9D337FD86D646F40@masahiro> <4A65D8D3.9060400@dallaway.org.uk> <3F8ED0BDC83C43259ADD0DDE963395DF@masahiro> <4A671AEE.2000101@dallaway.org.uk> <407D126036C3460AB7AA0264475F04E0@masahiro> <4A6971F2.1030100@dallaway.org.uk> <E6A66DCA0038483BAC5493029EF4A913@masahiro> <095F57A600314F7E86F6731FCC889A3D@masahiro> <87D23C72FA344A339A61EA9D3E333467@masahiro>
m mariga wrote:
> First of all,couldn't I set "net"and "stubs" Packages together on
> ConfigTool ?
> By Packages,I mean,it is in Templates dialog-window not in Packages
> dialog-window.
> When I selected "net",there's nothing in Packages dialog-window
> corresponding to "stubs" function.
> If I could not set both functions together on ConfigTool
> conveniently,then I must convert cdl files.
The GDB stubs configuration (configured via the "stubs" template) does
not support networking. If you require GDB remote debugging over a
network connection then you will need to build RedBoot using the
"redboot" template. RedBoot incorporates its own TCP/IP stack so you do
not need to add eCos networking packages.
If you have not already done so, I suggest you proceed by attempting to
configure and build the GDB stubs by selecting the "stubs" template. For
most targets, no further configuration is necessary.
I hope this helps...
John Dallaway
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss