This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: RedBoot loading eCOS examples causes PC reboot
On 2009-10-24, peter_lanius@yahoo.com.au <peter_lanius@yahoo.com.au> wrote:
>> I then use Hyperterminal to send the SREC file via Ymodem.
>> This process seems to run ok until it is finished, when the
>> suddenly PC reboots. That happens every time. No other
>> applications are open. The board is connected via a
>> USB-to-Serial cable and the Olimex JTAG ARM_USB_OCD is also
>> connected, but OpenOCD/GDB is not running.
>>
>> I have tried it with the ELF file as well, same result.
>>
>> What am I doing wrong
> You're using Windows.
>> and why does the PC reboot?
> You're using Windows.
> 1/2 ;)
> Seriously, it's a Windows problem. Probably a bug in one of
> the of the USB-serial drivers (either the one for the
> ARM_USB_OCD adapter or the one for the USB-serial cable). Try
> it without the ARM_USB_OCD plugged in. Try it with a different
> USB-serial cable (one that uses a chip from a different
>vendor).
Yes, it was. It was the USB-serial cable. Replaced the cable, unplugged the JTAG for good measure and now works fine.
> It might also be Hyperterminal. Though it's a buggy piece of
> dreck, I don't think it's the cuplit in this case -- but you
> could try something like Teraterm.
> Or you could try using Linux...
Yep, done that. Have installed openSUSE and am now slowly migrating everything across... Haven't used Unix since 1993, so I am not rushing it :)
> --
> Grant
Thanks again
Peter
__________________________________________________________________________________
Get more done like never before with Yahoo!7 Mail.
Learn more: http://au.overview.mail.yahoo.com/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss