This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Segfault of configtool
- From: John Dallaway <john at dallaway dot org dot uk>
- To: Manuel Borchers <manuel at matronix dot de>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Wed, 27 Jan 2010 19:09:57 +0000
- Subject: [ECOS] Re: Segfault of configtool
- References: <1264600943.30358.10.camel@wind>
Hi Manuel
Manuel Borchers wrote:
> I'm planning a new (platform) port to an ARM9-based processor. Therefore
> I'm currently studying the code and fiddling a bit around.
>
> As a base I use the ARM Integrator port, as it seems quite fitting for
> the task (same UART, same ARM966). Previously I used the innovator port,
> but switched over.
>
> The problem I'm having can be reproduced with the Innovator port. When I
> use the config tool and select the Innovator platform with the redboot
> template the project is set up fine. To generate a redboot image, I then
> try to import the redboot_RAM.ecm. There, the configtoll crashes with a
> segfault.
I can reproduce this issue with the Integrator target, but not with a
small sample of other targets. There must be something unusual about the
Integrator port which is triggering a bug in configtool. Can you raise a
bug report against ConfigTool 3.0 using Bugzilla please?
http://bugs.ecos.sourceware.org/
John Dallaway
eCos maintainer
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss