This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: about redboot3
- From: Shu Higashiyama <higashi at jiyu-sha dot co dot jp>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 15 Feb 2010 22:09:01 +0900
- Subject: Re: [ECOS] about redboot3
Thank you Mr.Sergei and All.
LPC2468 OEM Board /embeddedartists is used.
>It sounds good. If you cannot use GDB to dig an issue I would try to
>Build RedBoot with iopeek, iopoke commands and using them just try to
>read FLASH ID codes, look here, please (find your part's code)
The above-mentioned operated by redboot(without FLASH support) that operated normally.
ID of Flash-Rom was able to be read without hanging up by using iopeek and iopoke.
However, $ ecosconfig --srcdir=${ECOS_REPOSITORY} Add flash hangs up.
If Flash-Rom cannot be recognized, cannot Ecos be loaded?
>And the last tip. The eCos' (PD) ChangeLog has record:
>2008-07-08 Uwe Kindler <uwe_kindler@web.de>
>* NEWS:
>* ecos.db: Add EA LPC2468 OEM board, target, flash driver,
>LPC24XXX variant + serial driver
>So, seek the ecos-patches, ecos-discuss lists around this date point
>and may be you get more info about used port.
>Sergei
I confirmed the above-mentioned file. Because the time stamp is 2009-3-27, I think it is the latest.
The way that applies patches when there is doing patches again is not understood.
I'm sorry English ..poor...
Please continue your favors toward continuation.
I am sorry my best regards in a rudimentary question because it is a beginner.
--------------------------------------------
Shu Higashiyama
jyu-sha Corp.
2-20-19-609,Teraya,Tsurumi-ku,Yokohama-city,Japan
Tel 81-45-576-0976
Fax 81-45-576-0976
E-Mail aeb05134@nifty.com
higashi@jiyu-sha.co.jp
URL http://homepage1.nifty.com/jiyu-sha/
http://www.jiyu-sha.co.jp
---------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss