RE: [ECOS] Re: Flash support for ea2648 target

[viren dot dobariya at aftek dot com]

> On Tue, 2 Mar 2010, Sergei Gavrikov wrote:
>
> [Add Youqiang Zou to CC]
>
>> On Tue, 2 Mar 2010, viren.dobariya@aftek.com wrote:
>>>> On Tue, 2 Mar 2010, viren.dobariya wrote:
>>>>> Hi, sergei,
>>>>>      I am still struggling with flash problem in EA-2468 board.
>>>>>      In this mail, you mention that Youqiang Zou added
>>>>> CYG_FLASH_DRIVER definition to flash_ea2468.c. Can you explain me
>>>>> detail?
>>>>> Should I add same definition for my board??
>>>>
>>>> As I could understand, it is possible the same definition should be
>>>> added
>>>> to current platform specific driver. But, Youqiang also pointed that
>>>> he
>>>> use other flash parts, so, do not apply his lines as is. To know what
>>>> the
>>>> macro is (does), please, refer to eCos documentation:
>>>>
>>>> http://ecos.sourceware.org/docs-latest/ref/io-flash.html
>>>> http://ecos.sourceware.org/docs-latest/ref/ecos-flash-v2-dev.html
>>>>
>>>> Sergei
>>>
>>> Hi, Sergei,
>>>   Thanks for documentation.
>>>   Can you ask Youqiang Zou that how did he add CYG_FLASH_DRIVER
>>> defination?? If he gives us example then i will add according to my
>>> device.
>>>
>>>
>>> Thanks,
>>> Viren
>>
>> I was looking the cludges when I got his e-mail and I'd seen that he did
>> CC to the list, but, may be he is not subscribed to the list, so, you
>> have
>> got no copy. Well, he wrote
>
>          Youqiang> Refered to the arm_aim711_flash.c, I?changed?the
>          Youqiang> flash_ea2468.c as the below list.
>
>          Youqiang> // The EA LPC2468 OEM board has one SST 39VF3201 part
>          Youqiang> #define CYGNUM_FLASH_INTERLEAVE (1)
>          Youqiang> #define CYGNUM_FLASH_SERIES     (1)
>          Youqiang> #define CYGNUM_FLASH_WIDTH      (16)
>          Youqiang> #define CYGNUM_FLASH_BASE       (0x80000000)
>
> [drop some implementation details]
>
>          Youqiang> I had not the EA2468 board, my platform is:
>          Youqiang> Platform: LPC2478 Board (ARM7TDMI-S)
>          Youqiang> RAM: 0xa0000000-0xa2000000 [0xa000aac8-0xa1ffc000
> available]
>          Youqiang> FLASH: 0x81000000-0x811fffff, 512 x 0x1000 blocks
>
> I assume that is the real RedBoot's output and that looks like that
> CYGNUM_FLASH_BASE address was pointed on 0x81000000. Other chip select
> pin? So, check that too. Also, CYGNUM_FLASH_WIDTH says about 16-bit.
>
> They said here
> http://ecos.sourceware.org/docs-latest/ref/ecos-flash-library.html
> Will Robinson!
>
>
> Sergei
> --
>
>> My comments: as I can see there is fitted other flash parts on his
>> board,
>> so, I do not think that you must change own definition, just define
>> CYG_FLASH_DRIVER properly acording the used FLASH's "geometry".
>>
>>
>> Sergei
> --

//-----------------------------------

hi, Sergei
thanks a lot.........
now, My flash is working.
Thanks for your kind support.
once again thank you very much...

Thanks,
Viren

> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss




-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss