This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Basic question about porting to Xilinx PPC440
- From: Salvatore Lionetti <salvatorelionetti at yahoo dot it>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Tue, 30 Mar 2010 16:53:28 +0000 (GMT)
- Subject: [ECOS] Re: Basic question about porting to Xilinx PPC440
Hi,
[ecos->xilinx ppc440]
Don't know
[440->450]
Many month ago, when i'm working with a salary, i've ported a boot (mixed ASM/C) from ppc440EP to ppc405GPr on a remote radio head for 4G with a proprietary os.
The raw porting IN MY CASE was simple:
- only few opcodes was incompatible by the 2 uP (like the instruction/data sync);
- some base address or peripheral controller max instance change (not the register relative offset, syntax and naming);
- ebc, i2c, ethernet controller look likes very similar;
- different internal clock frequency and pll
[Linux->Ecos]
Don't know
[405 Board]
For ppc405 porting, i've found that guide you post (many thanks) if followed generates a demo.elf(mind emb dev) or redboot.elf(uni-padeborn)
Is there a .bin image or procedure somewhere? Is ppc405 emulated from the beginning of instruction fetching@0xFFFFFFFC?
Have a good day
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss