This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
printf/gets/etc not working
- From: Slide <slide dot o dot mix at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 13 Aug 2010 18:21:38 -0700
- Subject: [ECOS] printf/gets/etc not working
I am bringing up eCos on a custom internal board, I have diag_printf
working just fine, but I can't seem to get printf or gets to work
correctly. I only have one serial port on the board, I setup the
default console to be /dev/ttydiag, which I thought would be the same
as what diag_printf does, but I don't see anything come out with
printf. I looked through the archives and saw something about
/dev/haldiag, but I am not sure if I can use that as the default
console, and if it would give me bidirectional communication.
Thanks,
slide
--
slide-o-blog
http://slide-o-blog.blogspot.com/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss