This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: redboot lzma error, cant boot loaded images
Just a small update
I create a flash partition of size
fis create -b 0x00000000 -e 0x00000000 -r 0x00000000 -l 0x003C03E8 -f
0xa8030000 -n Image
where
3C03E8 is about 1000 bytes greater than the size of the largest image
in the set i am trying to flash
Writing the elf file directly gives
<snip>
Kernel: new Image size
fis load -l -b %{freememlo} -c Image
lzmaInternalSize=52844 is greater LZMA_MAX_SIZE=16000.
lzma_decode failed. res=1
ELF image parsering begin...
Can't read ELF header
ELF image parsering done...
Checksum: 0xecec3601
</snip>
Loading
fis load -b %{freememlo} -l -c Image
too long file.
lzma_decode failed. res=1
Checksum: 0xc360955a
And go seems to hand the serial console.
version info
RedBoot> version
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Derytech release, version v2.0 - built 22:31:40, Nov 9 2010
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x80000000-0x82000000, [0x800409d0-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
as again,
Help would be greatly appreciated,
Harish
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss