This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
serial output corruption and tables
- From: Slide <slide dot o dot mix at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 16 Sep 2011 21:16:05 -0700
- Subject: [ECOS] serial output corruption and tables
I am porting eCos to a board we have in house, it's similar to some of
the other PXA250/270 boards out there. One thing I have noticed is
that sometimes when I rebuild and run, the serial output gets
corrupted, but if I change some code and then build again, it works
just fine. I also have created my own tables using things like
CYG_HAL_TABLE_ENTRY and so forth for some of my own stuff, but they
seem to be acting strange, not like the ones built-in to eCos like the
devtab and others. Could these two things be related in any way? Is
there possibly some setting I am missing for alignment or something
like that?
Thanks,
slide
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss