This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Re: lwIP for eCos (LPC1768)
- From: Ilija Kocho <ilijak at siva dot com dot mk>
- To: EnneGi <enricogiordano1992 at gmail dot com>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 17 May 2013 12:54:52 +0200
- Subject: Re: Re: lwIP for eCos (LPC1768)
- References: <40514B66-476F-4A9A-BE3A-B598BB6E2F6D at linear dot com> <1368633054233-231968 dot post at n7 dot nabble dot com> <92912635-BB53-4BA0-A13B-F54C934B5721 at linear dot com> <1368645653959-232013 dot post at n7 dot nabble dot com> <1368691023050-232106 dot post at n7 dot nabble dot com> <1368700522024-232125 dot post at n7 dot nabble dot com> <1368702490835-232132 dot post at n7 dot nabble dot com> <1368708755893-232164 dot post at n7 dot nabble dot com> <1368774967179-232324 dot post at n7 dot nabble dot com> <5195DD50 dot 7030002 at siva dot com dot mk> <1368787393839-232351 dot post at n7 dot nabble dot com>
On 17.05.2013 12:43, EnneGi wrote:
> Yes, I used lpc1766 template. Ethernet PHY is abilited by configtool; what
> must I change? Lpc1766 architecture is complitely compatible with lpc1768...
PHY is a separate chip that physically couples Ethernet MAC (on chip)
with Ethernet physical Tx and Rx signals. Check if the one on your board
is same as the one selected in configtool, and if necessary select other.
Ilija
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss