This is the mail archive of the
ecos-maintainers@sources.redhat.com
mailing list for the eCos project.
Re: Proposal for processing patches for the eCos 2.0 branch
- From: Andrew Lunn <andrew dot lunn at ascom dot ch>
- To: Jonathan Larmour <jifl at ecoscentric dot com>
- Cc: Andrew Lunn <andrew dot lunn at ascom dot ch>, ecos-maintainers at sources dot redhat dot com
- Date: Mon, 14 Apr 2003 09:28:33 +0200
- Subject: Re: Proposal for processing patches for the eCos 2.0 branch
- References: <200303180848.24682.jld@ecoscentric.com> <1047995318.7459.2925.camel@hermes.chez-thomas.org> <200303181605.21189.jld@ecoscentric.com> <20030318185613.GE17373@biferten.ma.tech.ascom.ch> <3E979D68.1000903@eCosCentric.com>
> >I used it yesterday for the first time to do the requested testing of
> >2.0b1. I ran into problems running the test cases. Quite a few times
> >it did not detect when the test case had finished. I also had gdb
> >protocol errors with signal4. Running the tests by hand worked
> >fine. Are these known issues? Do i need to create bugzilla entries?
>
> I don't think I ever saw a reply to this, so if this is still
> reproducable with a snapshot from
> http://www.ecoscentric.com/devzone/configtool.shtml then bugzilla it.
I've not tried it again. Maybe later this week.
> >The testing of AFE1 passed. I used the HAL from 1.5.2 since this is
> >not in 2.0b1. I then tried to put Redboot in the boot block rather
> >than using ascom's POST as the boot block and killed the board :-(
> >This is probably my error in building the image since its not a normal
> >setup. Time to find a JTAG programmer.
>
> Glad AFE sorta worked, and hope you got it sorted!
Nope. I took the lazy option of pulled a couple of old EBSA based
devices out of the junk cupboard.
Andrew