This is the mail archive of the
ecos-patches@sources.redhat.com
mailing list for the eCos project.
Misc documentation things
- From: Jonathan Larmour <jifl at eCosCentric dot com>
- To: eCos Patches List <ecos-patches at sources dot redhat dot com>
- Date: Mon, 24 Feb 2003 14:03:07 +0000
- Subject: Misc documentation things
This brings together some previously unreferenced doc pages into the new
(albeit imperfect) doc system. It also fixes up all the "doc" directives
in CDL, including adding new ones where they didn't already exist but
should have. The ecos reference guide is now known as ecos-ref.*, not just
ecos.*. And I reordered the docs a little to a functional grouping that
made a little more sense (to me).
There's a bunch of other doc fixes thrown in for good measure, but the
only one worth commenting on is that I've removed all references to EL/IX
from the POSIX docs now, including changing the title of the docs. EL/IX
has passed on, it is no more, it has ceased to be, kicked the bucket,
shuffled off its mortal coil. EL/IX is an ex-standard.
This is going into trunk and v2 branch.
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
--[ "You can complain because roses have thorns, or you ]--
--[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine
? doc.diff
Index: doc/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/doc/ChangeLog,v
retrieving revision 1.13
diff -u -5 -p -r1.13 ChangeLog
--- doc/ChangeLog 3 Feb 2003 16:35:33 -0000 1.13
+++ doc/ChangeLog 24 Feb 2003 06:46:05 -0000
@@ -1,5 +1,22 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * sgml/doclist: Reorder in a slightly more logical order with
+ related bits grouped together.
+ Add docs for power management, USB (slave, eth slave, and SA11x0
+ and NEC uPD8985xx drivers), and synthetic target HAL, eth and
+ watchdog drivers.
+
+ * sgml/.cvsignore: Add gifs and rename ecos.* to ecos-ref.*
+
+ * sgml/makemakefile: Rename ecos.sgml/html/etc. to ecos-ref.
+ Copy over GIFs where they exist.
+ Don't treat porting guide specially at the top... treat it only as
+ specially as the other special cases.
+ Update (C) holders.
+ Update licence/warranty blurb.
+
2003-01-30 Andrew Lunn <andrew dot lunn at ascom dot ch>
* sgml/doclist: Added snmp-manpages.sgml
* sgml/makemakefile: Extend the kludge to include snmp-manpages.sgml
Index: doc/sgml/.cvsignore
===================================================================
RCS file: /cvs/ecos/ecos/doc/sgml/.cvsignore,v
retrieving revision 1.2
diff -u -5 -p -r1.2 .cvsignore
--- doc/sgml/.cvsignore 22 Dec 2002 11:18:55 -0000 1.2
+++ doc/sgml/.cvsignore 24 Feb 2003 06:46:05 -0000
@@ -1,8 +1,9 @@
-ecos.sgml
-ecos.tex
-ecos.log
-ecos.aux
-ecos.out
-ecos.pdf
+ecos-ref.sgml
+ecos-ref.tex
+ecos-ref.log
+ecos-ref.aux
+ecos-ref.out
+ecos-ref.pdf
makefile
-*.html
\ No newline at end of file
+*.html
+*.gif
Index: doc/sgml/doclist
===================================================================
RCS file: /cvs/ecos/ecos/doc/sgml/doclist,v
retrieving revision 1.7
diff -u -5 -p -r1.7 doclist
--- doc/sgml/doclist 3 Feb 2003 16:35:33 -0000 1.7
+++ doc/sgml/doclist 24 Feb 2003 06:46:05 -0000
@@ -1,26 +1,35 @@
kernel/current/doc/kernel.sgml
-compat/uitron/current/doc/uitron.sgml
-hal/common/current/doc/hal.sgml
-io/common/current/doc/io.sgml
-io/pci/current/doc/pci.sgml
-language/c/libc/common/current/doc/libc.sgml
-compat/posix/current/doc/posix.sgml
-io/fileio/current/doc/fileio.sgml
redboot/current/doc/redboot.sgml
redboot/current/doc/redboot_cmds.sgml
redboot/current/doc/redboot_rebuilding.sgml
redboot/current/doc/redboot_installing.sgml
redboot/current/doc/redboot_epilogue.sgml
+hal/common/current/doc/hal.sgml
+hal/common/current/doc/porting.sgml
+language/c/libc/common/current/doc/libc.sgml
+io/common/current/doc/io.sgml
+io/fileio/current/doc/fileio.sgml
+io/pci/current/doc/pci.sgml
+compat/posix/current/doc/posix.sgml
+compat/uitron/current/doc/uitron.sgml
net/common/current/doc/tcpip.sgml
net/common/current/doc/tcpip-manpages.sgml
-net/tcpip/current/doc/openbsd.sgml
net/bsd_tcpip/current/doc/freebsd.sgml
+net/tcpip/current/doc/openbsd.sgml
+net/ns/dns/current/doc/dns.sgml
io/eth/current/doc/ethdrv.sgml
net/snmp/agent/current/doc/snmp.sgml
net/snmp/agent/current/doc/snmp-manpages.sgml
-net/ns/dns/current/doc/dns.sgml
net/httpd/current/doc/httpd.sgml
net/ftpclient/current/doc/ftpclient.sgml
services/crc/current/doc/crc.sgml
services/cpuload/current/doc/cpuload.sgml
services/profile/gprof/current/doc/profile.sgml
+services/power/common/current/doc/power.sgml
+io/usb/slave/current/doc/usbs.sgml
+io/usb/eth/slave/current/doc/usbseth.sgml
+hal/synth/arch/current/doc/synth.sgml
+devs/usb/sa11x0/current/doc/usbs_sa11x0.sgml
+devs/usb/nec_upd985xx/current/doc/usbs_upd985xx.sgml
+devs/eth/synth/ecosynth/current/doc/syntheth.sgml
+devs/watchdog/synth/current/doc/synth_watchdog.sgml
Index: doc/sgml/makemakefile
===================================================================
RCS file: /cvs/ecos/ecos/doc/sgml/makemakefile,v
retrieving revision 1.9
diff -u -5 -p -r1.9 makemakefile
--- doc/sgml/makemakefile 3 Feb 2003 16:35:33 -0000 1.9
+++ doc/sgml/makemakefile 24 Feb 2003 06:46:05 -0000
@@ -1,10 +1,10 @@
#!/bin/sh
-touch ecos.sgml
+touch ecos-ref.sgml
touch makefile
-chmod +w ecos.sgml
+chmod +w ecos-ref.sgml
chmod +w makefile
cat > makefile <<EOF
#=============================================================================
#
@@ -15,10 +15,11 @@ cat > makefile <<EOF
#=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
# -------------------------------------------
# This file is part of eCos, the Embedded Configurable Operating System.
# Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+# Copyright (C) 2003 Jonathan Larmour
#
# eCos is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 or (at your option) any later version.
#
@@ -53,14 +54,14 @@ cat > makefile <<EOF
#####DESCRIPTIONEND####
#=============================================================================
TOPLEVEL := ../../packages
EOF
-/bin/echo MAIN_SGML := ecos.sgml >> makefile
+/bin/echo MAIN_SGML := ecos-ref.sgml >> makefile
/bin/echo -n OTHER_SGML := >> makefile
-cat >ecos.sgml <<EOF
+cat >ecos-ref.sgml <<EOF
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
<!-- Begin Document Specific Declarations -->
<!ENTITY ui "µITRON">
<!ENTITY versiondir CDATA "v2_0">
@@ -73,39 +74,54 @@ PACKAGEVER=${1:-'current'}
for i in `cat doclist`; do
line="`echo $i | sed 's/#.*//;'`"
if (test ! -z $line); then
/bin/echo -n " ../../packages/$i" | sed "s@/current/@/${PACKAGEVER}/@g" >> makefile
entityi="`echo $i | sed 's@/@- at g; s at \ dot @- at g; s at _@- at g; s at -current-doc@@g; s at -current@@g'`"
- echo "<!ENTITY $entityi SYSTEM \"../../packages/$i\">" | sed "s@/current/@/${PACKAGEVER}/@g" >> ecos.sgml
+ echo "<!ENTITY $entityi SYSTEM \"../../packages/$i\">" | sed "s@/current/@/${PACKAGEVER}/@g" >> ecos-ref.sgml
+ fi
+done
+
+# Go through again but find GIFs to copy
+for i in `for j in \`cat doclist\` ; do dirname $j ; done | sort | uniq` ; do
+ diri=`echo ../../packages/$i | sed "s@/current/@/${PACKAGEVER}/@g"`
+ dirigifs=`ls $diri/*.gif 2>/dev/null | tr '\n' ' '`
+ if [ x"$dirigifs" != x ]; then
+ copyfiles="$copyfiles $dirigifs"
fi
done
-echo "<!ENTITY hal-common-current-doc-porting-sgml SYSTEM \"../../packages/hal/common/${PACKAGEVER}/doc/porting.sgml\">" >> ecos.sgml
cat >> makefile <<EOF
-MAIN_HTML := ecos.html
-MAIN_PDF := ecos.pdf
+MAIN_HTML := ecos-ref.html
+MAIN_PDF := ecos-ref.pdf
PICTURES :=
+COPYFILES := $copyfiles
include \$(TOPLEVEL)/pkgconf/rules.doc
EOF
-cat >> ecos.sgml <<EOF
+cat >> ecos-ref.sgml <<EOF
<!-- End Document Specific Declarations -->
]>
-<BOOK ID="ECOS">
+<BOOK ID="ECOS-REF">
<bookinfo>
- <TITLE>eCos</TITLE>
+ <TITLE>eCos Reference Manual</TITLE>
<copyright>
<year>1998</year>
<year>1999</year>
<year>2000</year>
<year>2001</year>
<year>2002</year>
+ <year>2003</year>
<holder>Red Hat, Inc.</holder>
+ <holder>Nick Garnett (eCosCentric)</holder>
+ <holder>Jonathan Larmour (eCosCentric)</holder>
+ <holder>Andrew Lunn (Ascom)</holder>
+ <holder>Gary Thomas (MLB Associates)</holder>
+ <holder>Bart Veer (eCosCentric)</holder>
</copyright>
<legalnotice>
<title>Documentation licensing terms</title>
<para>This material may be distributed only subject to the terms
@@ -151,16 +167,18 @@ of Microsoft Corporation, Inc. </para>
<para>All other brand and product names, trademarks, and copyrights are the
property of their respective owners. </para>
</legalnotice>
<legalnotice>
<title>Warranty</title>
-<para>eCos and RedBoot are open source software, covered by the Red Hat eCos Public License,
+<para>eCos and RedBoot are open source software, covered by a
+modified version of the <ulink url="http://www.gnu.org/copyleft/gpl.html";>GNU
+General Public Licence</ulink>,
and you are welcome to change it and/or distribute copies of it under certain
-conditions. The supplied version of eCos and/or RedBoot is supported for customers of Red Hat. See <ulink
+conditions. See <ulink
url="http://sources.redhat.com/ecos/license-overview.html";>http://sources.redhat.com/ecos/license-overview.html
-</ulink></para>
-<para>For non-customers, eCos and RedBoot software has NO WARRANTY. </para>
+</ulink> for more information about the license.</para>
+<para>eCos and RedBoot software have NO WARRANTY. </para>
<para>Because this software is licensed free of charge, there are no warranties
for it, to the extent permitted by applicable law. Except when otherwise stated
in writing, the copyright holders and/or other parties provide the software
“as is” without warranty of any kind, either expressed or implied,
including, but not limited to, the implied warranties of merchantability and
@@ -184,14 +202,12 @@ EOF
for i in `cat doclist`; do
line="`echo $i | sed 's/#.*//;'`"
if (test ! -z $line); then
entityi="`echo $i | sed 's@/@- at g; s at \ dot @- at g; s at _@- at g; s at -current-doc@@g; s at -current@@g'`"
# special kludge
- if [ "`basename $i`" != "tcpip-manpages.sgml" -a "`basename $i`" != "snmp-manpages.sgml" ]; then
- echo "&$entityi;" >> ecos.sgml
+ if [ "`basename $i`" != "tcpip-manpages.sgml" -a "`basename $i`" != "snmp-manpages.sgml" -a "`basename $i`" != "porting.sgml" ]; then
+ echo "&$entityi;" >> ecos-ref.sgml
fi
fi
done
-echo '</book>' >> ecos.sgml
-
-
+echo '</book>' >> ecos-ref.sgml
Index: packages/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/ChangeLog,v
retrieving revision 1.99
diff -u -5 -p -r1.99 ChangeLog
--- packages/ChangeLog 21 Feb 2003 18:17:32 -0000 1.99
+++ packages/ChangeLog 24 Feb 2003 06:46:07 -0000
@@ -1,5 +1,11 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * pkgconf/rules.doc: Allow support for copying files directly from
+ source doc dir to build dir. Primarily intended for copying over
+ pre-built GIFs for the moment.
+
2003-02-20 Gary Thomas <gary at mind dot be>
* ecos.db: New platform - NMI uE250 (ARM Xscale PXA250)
2003-02-14 Tim Michals <t dot michals at attbi dot com>
Index: packages/compat/posix/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/compat/posix/current/ChangeLog,v
retrieving revision 1.37
diff -u -5 -p -r1.37 ChangeLog
--- packages/compat/posix/current/ChangeLog 13 Feb 2003 14:34:04 -0000 1.37
+++ packages/compat/posix/current/ChangeLog 24 Feb 2003 06:46:07 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * doc/posix.sgml: Expunge EL/IX. Dead standard.
+
2003-02-13 Jonathan Larmour <jifl at eCosCentric dot com>
* src/mutex.cxx: Include sched.hxx for scheduler lock/unlock primitives.
Reported by Jani Monoses.
Index: packages/compat/posix/current/cdl/posix.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/compat/posix/current/cdl/posix.cdl,v
retrieving revision 1.10
diff -u -5 -p -r1.10 posix.cdl
--- packages/compat/posix/current/cdl/posix.cdl 31 Jan 2003 11:53:14 -0000 1.10
+++ packages/compat/posix/current/cdl/posix.cdl 24 Feb 2003 06:46:08 -0000
@@ -50,10 +50,11 @@
cdl_package CYGPKG_POSIX {
display "POSIX compatibility layer"
description "This package enables the POSIX compatibility
layer that implements IEEE 1003.1."
+ doc ref/posix-compatibility.html
include_dir cyg/posix
requires CYGPKG_KERNEL
requires CYGPKG_ISOINFRA
requires CYGPKG_ERROR
Index: packages/compat/posix/current/doc/posix.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/compat/posix/current/doc/posix.sgml,v
retrieving revision 1.3
diff -u -5 -p -r1.3 posix.sgml
--- packages/compat/posix/current/doc/posix.sgml 13 Jan 2003 05:49:43 -0000 1.3
+++ packages/compat/posix/current/doc/posix.sgml 24 Feb 2003 06:46:09 -0000
@@ -27,22 +27,21 @@
<!-- ####DESCRIPTIONEND#### -->
<!-- =============================================================== -->
<!-- }}} -->
-<part id="elix-compatibility">
-<title>eCos EL/IX compatibility layer</title>
+<part id="posix-compatibility">
+<title>eCos POSIX compatibility layer</title>
<chapter id="posix-standard-support">
<title>POSIX Standard Support</title>
<!-- {{{ Intro -->
<para>
eCos contains support for the POSIX Specification (ISO/IEC
- 9945-1)[POSIX]. This support follows EL/IX level 1
- in the functionality supplied [ELIX].
+ 9945-1)[POSIX].
</para>
<para>
POSIX support is divided between the POSIX and the FILEIO
packages. The POSIX package provides support for threads,
signals, synchronization, timers and message queues. The FILEIO
@@ -1461,17 +1460,10 @@ int shutdown( int s, int how);
<!-- {{{ Bibliography -->
<bibliography id="posix-references-and-bibliography">
<title>References and Bibliography</title>
- <bibliomixed>
- <bibliomisc>[ELIX]</bibliomisc>
- <title>Embedded Linux API Specification</title>
- <bibliomisc><ulink
- url="http://sources.redhat.com/elix/";>http://sources.redhat.com/elix/
- </ulink></bibliomisc>
- </bibliomixed>
<bibliomixed>
<bibliomisc>[Lewine]</bibliomisc>
<author>
<firstname>Donald</firstname>
<othername>A.</othername>
Index: packages/compat/uitron/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/compat/uitron/current/ChangeLog,v
retrieving revision 1.23
diff -u -5 -p -r1.23 ChangeLog
--- packages/compat/uitron/current/ChangeLog 29 May 2002 18:28:04 -0000 1.23
+++ packages/compat/uitron/current/ChangeLog 24 Feb 2003 06:46:09 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/uitron.cdl: Update doc link.
+
2002-05-27 Jesper Skov <jskov at redhat dot com>
* cdl/uitron.cdl: Don't build C tests when C++ options selected.
2002-05-22 Nick Garnett <nickg at redhat dot com>
Index: packages/compat/uitron/current/cdl/uitron.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/compat/uitron/current/cdl/uitron.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 uitron.cdl
--- packages/compat/uitron/current/cdl/uitron.cdl 29 May 2002 18:28:05 -0000 1.6
+++ packages/compat/uitron/current/cdl/uitron.cdl 24 Feb 2003 06:46:09 -0000
@@ -50,11 +50,11 @@
# ====================================================================
cdl_package CYGPKG_UITRON {
display "uITRON compatibility layer"
include_dir cyg/compat/uitron
- doc redirect/micro-itron-api.html
+ doc ref/compat-uitron.html
requires CYGPKG_KERNEL
description "
eCos supports a uITRON Compatibility Layer, providing
full Level S (Standard) compliance with Version 3.02 of
the uITRON Standard, plus many Level E (Extended) features.
Index: packages/devs/eth/synth/ecosynth/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/eth/synth/ecosynth/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/devs/eth/synth/ecosynth/current/ChangeLog 13 Feb 2003 22:22:03 -0000 1.6
+++ packages/devs/eth/synth/ecosynth/current/ChangeLog 24 Feb 2003 06:46:11 -0000
@@ -1,5 +1,14 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/syntheth.cdl: Add doc link.
+
+ * doc/syntheth.sgml: Comment out DOCTYPE for now to allow building
+ with standard doc build.
+ Add an enclosing <reference> so it's structured better with standard
+ doc build.
+
2003-02-13 Bart Veer <bartv at ecoscentric dot com>
* src/syntheth.c, cdl/syntheth.cdl: add dependency on errno.h for
error codes, and avoid memset() warning
Index: packages/devs/eth/synth/ecosynth/current/cdl/syntheth.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/eth/synth/ecosynth/current/cdl/syntheth.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 syntheth.cdl
--- packages/devs/eth/synth/ecosynth/current/cdl/syntheth.cdl 13 Feb 2003 22:24:14 -0000 1.3
+++ packages/devs/eth/synth/ecosynth/current/cdl/syntheth.cdl 24 Feb 2003 06:46:11 -0000
@@ -57,10 +57,11 @@ cdl_package CYGPKG_DEVS_ETH_ECOSYNTH {
ethernet device as provided by the Linux kernel's tunnel/tap
support. The eCos code interacts with a suitable Linux application
through the I/O auxiliary. Up to four ethernet devices are
supported, and the host-side target definition file controls how
each device will perform its I/O."
+ doc ref/devs-eth-synth-ecosynth.html
parent CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_HAL_SYNTH
Index: packages/devs/eth/synth/ecosynth/current/doc/syntheth.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/eth/synth/ecosynth/current/doc/syntheth.sgml,v
retrieving revision 1.2
diff -u -5 -p -r1.2 syntheth.sgml
--- packages/devs/eth/synth/ecosynth/current/doc/syntheth.sgml 25 Sep 2002 19:54:42 -0000 1.2
+++ packages/devs/eth/synth/ecosynth/current/doc/syntheth.sgml 24 Feb 2003 06:46:11 -0000
@@ -1,6 +1,6 @@
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!-- DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
@@ -31,10 +31,13 @@
<!-- ####DESCRIPTIONEND#### -->
<!-- =============================================================== -->
<!-- }}} -->
+<reference id="devs-eth-synth-ecosynth-ref">
+ <title>Synthetic Target Ethernet Driver</title>
+
<refentry id="devs-eth-synth-ecosynth">
<refmeta>
<refentrytitle>Synthetic Target Ethernet Driver</refentrytitle>
</refmeta>
<refnamediv>
@@ -510,5 +513,6 @@ This procedure returns a list of the eth
instantiated, for example <literal>{eth0 eth1}</literal>.
</para>
</refsect1>
</refentry>
+</reference>
Index: packages/devs/serial/arm/aaed2000/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/aaed2000/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/arm/aaed2000/current/ChangeLog 23 May 2002 23:01:08 -0000 1.2
+++ packages/devs/serial/arm/aaed2000/current/ChangeLog 24 Feb 2003 06:46:16 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_aaed2000.cdl: Remove irrelevant doc link.
+
2001-11-14 Jesper Skov <jskov at redhat dot com>
* src/aaed2000_serial.c (aaed2000_serial_DSR): Reworked a little
to fill/empty FIFO.
Index: packages/devs/serial/arm/aaed2000/current/cdl/ser_arm_aaed2000.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/aaed2000/current/cdl/ser_arm_aaed2000.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ser_arm_aaed2000.cdl
--- packages/devs/serial/arm/aaed2000/current/cdl/ser_arm_aaed2000.cdl 23 May 2002 23:01:08 -0000 1.2
+++ packages/devs/serial/arm/aaed2000/current/cdl/ser_arm_aaed2000.cdl 24 Feb 2003 06:46:16 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_AAED200
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
Agilent AAED2000."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a aaed2000_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/arm/aeb/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/aeb/current/ChangeLog,v
retrieving revision 1.8
diff -u -5 -p -r1.8 ChangeLog
--- packages/devs/serial/arm/aeb/current/ChangeLog 23 May 2002 23:01:08 -0000 1.8
+++ packages/devs/serial/arm/aeb/current/ChangeLog 24 Feb 2003 06:46:17 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_aeb.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_arm_aeb.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/arm/aeb/current/cdl/ser_arm_aeb.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/aeb/current/cdl/ser_arm_aeb.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_arm_aeb.cdl
--- packages/devs/serial/arm/aeb/current/cdl/ser_arm_aeb.cdl 23 May 2002 23:01:08 -0000 1.6
+++ packages/devs/serial/arm/aeb/current/cdl/ser_arm_aeb.cdl 24 Feb 2003 06:46:17 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_AEB {
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
ARM AEB-1."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a aeb_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/arm/at91/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/at91/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/devs/serial/arm/at91/current/ChangeLog 23 May 2002 23:01:08 -0000 1.6
+++ packages/devs/serial/arm/at91/current/ChangeLog 24 Feb 2003 06:46:17 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_at91.cdl: Remove irrelevant doc link.
+
2001-09-20 Jesper Skov <jskov at redhat dot com>
* src/at91_serial.c (at91_serial_init): Use valid interrupt priority.
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
Index: packages/devs/serial/arm/at91/current/cdl/ser_arm_at91.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/at91/current/cdl/ser_arm_at91.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 ser_arm_at91.cdl
--- packages/devs/serial/arm/at91/current/cdl/ser_arm_at91.cdl 23 May 2002 23:01:09 -0000 1.4
+++ packages/devs/serial/arm/at91/current/cdl/ser_arm_at91.cdl 24 Feb 2003 06:46:17 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_AT91 {
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
Atmel AT91 (EB40)."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a at91_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/arm/cerfpda/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/cerfpda/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/arm/cerfpda/current/ChangeLog 23 May 2002 23:01:09 -0000 1.2
+++ packages/devs/serial/arm/cerfpda/current/ChangeLog 24 Feb 2003 06:46:17 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_cerfpda.cdl: Remove irrelevant doc link.
+
2002-02-04 Gary Thomas <gthomas at redhat dot com>
* include/arm_sa1110_cerfpda_ser.inl:
* cdl/ser_arm_cerfpda.cdl: New file(s) - port to Intrinsyc CerfPDA.
Index: packages/devs/serial/arm/cerfpda/current/cdl/ser_arm_cerfpda.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/cerfpda/current/cdl/ser_arm_cerfpda.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ser_arm_cerfpda.cdl
--- packages/devs/serial/arm/cerfpda/current/cdl/ser_arm_cerfpda.cdl 23 May 2002 23:01:09 -0000 1.2
+++ packages/devs/serial/arm/cerfpda/current/cdl/ser_arm_cerfpda.cdl 24 Feb 2003 06:46:17 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_CERFPDA
include_dir cyg/io
description "
This option enables the serial 16x5x device drivers for the
Cerfpda."
- doc redirect/ecos-device-drivers.html
# FIXME: This really belongs in the GENERIC_16X5X package
cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
display "Generic 16x5x serial driver required"
}
Index: packages/devs/serial/arm/cma230/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/cma230/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/serial/arm/cma230/current/ChangeLog 23 May 2002 23:01:09 -0000 1.7
+++ packages/devs/serial/arm/cma230/current/ChangeLog 24 Feb 2003 06:46:17 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_cma230.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_arm_cma230.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/arm/cma230/current/cdl/ser_arm_cma230.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/cma230/current/cdl/ser_arm_cma230.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_arm_cma230.cdl
--- packages/devs/serial/arm/cma230/current/cdl/ser_arm_cma230.cdl 23 May 2002 23:01:09 -0000 1.6
+++ packages/devs/serial/arm/cma230/current/cdl/ser_arm_cma230.cdl 24 Feb 2003 06:46:18 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_CMA230
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
Cogent ARM/CMA230."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a cma230_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/arm/e7t/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/e7t/current/ChangeLog,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ChangeLog
--- packages/devs/serial/arm/e7t/current/ChangeLog 23 May 2002 23:01:10 -0000 1.3
+++ packages/devs/serial/arm/e7t/current/ChangeLog 24 Feb 2003 06:46:18 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_e7t.cdl: Remove irrelevant doc link.
+
2001-10-19 Lars Lindqvist <Lars dot Lindqvist at combitechsystems dot com>
2001-10-19 Jonathan Larmour <jlarmour at redhat dot com>
* New package.
Index: packages/devs/serial/arm/e7t/current/cdl/ser_arm_e7t.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/e7t/current/cdl/ser_arm_e7t.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ser_arm_e7t.cdl
--- packages/devs/serial/arm/e7t/current/cdl/ser_arm_e7t.cdl 23 May 2002 23:01:10 -0000 1.3
+++ packages/devs/serial/arm/e7t/current/cdl/ser_arm_e7t.cdl 24 Feb 2003 06:46:18 -0000
@@ -3,42 +3,42 @@
# ser_arm_e7t.cdl
#
# eCos serial ARM/AEB-2 (E7T) configuration data
#
# ====================================================================
-#####ECOSGPLCOPYRIGHTBEGIN####
-## -------------------------------------------
-## This file is part of eCos, the Embedded Configurable Operating System.
-## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
-##
-## eCos is free software; you can redistribute it and/or modify it under
-## the terms of the GNU General Public License as published by the Free
-## Software Foundation; either version 2 or (at your option) any later version.
-##
-## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
-## WARRANTY; without even the implied warranty of MERCHANTABILITY or
-## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-## for more details.
-##
-## You should have received a copy of the GNU General Public License along
-## with eCos; if not, write to the Free Software Foundation, Inc.,
-## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-##
-## As a special exception, if other files instantiate templates or use macros
-## or inline functions from this file, or you compile this file and link it
-## with other works to produce a work based on this file, this file does not
-## by itself cause the resulting work to be covered by the GNU General Public
-## License. However the source code for this file must still be made available
-## in accordance with section (3) of the GNU General Public License.
-##
-## This exception does not invalidate any other reasons why a work based on
-## this file might be covered by the GNU General Public License.
-##
-## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
-## at http://sources.redhat.com/ecos/ecos-license/
-## -------------------------------------------
-#####ECOSGPLCOPYRIGHTEND####
+#####ECOSGPLCOPYRIGHTBEGIN####
+## -------------------------------------------
+## This file is part of eCos, the Embedded Configurable Operating System.
+## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+##
+## eCos is free software; you can redistribute it and/or modify it under
+## the terms of the GNU General Public License as published by the Free
+## Software Foundation; either version 2 or (at your option) any later version.
+##
+## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+## WARRANTY; without even the implied warranty of MERCHANTABILITY or
+## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+## for more details.
+##
+## You should have received a copy of the GNU General Public License along
+## with eCos; if not, write to the Free Software Foundation, Inc.,
+## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+##
+## As a special exception, if other files instantiate templates or use macros
+## or inline functions from this file, or you compile this file and link it
+## with other works to produce a work based on this file, this file does not
+## by itself cause the resulting work to be covered by the GNU General Public
+## License. However the source code for this file must still be made available
+## in accordance with section (3) of the GNU General Public License.
+##
+## This exception does not invalidate any other reasons why a work based on
+## this file might be covered by the GNU General Public License.
+##
+## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+## at http://sources.redhat.com/ecos/ecos-license/
+## -------------------------------------------
+#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): Lars dot Lindqvist at combitechsystems dot com
# Contributors: jlarmour
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_E7T {
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This package contains serial device drivers for the
ARM AEB-2 (E7T)."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a e7t_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/arm/ebsa285/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/ebsa285/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/serial/arm/ebsa285/current/ChangeLog 23 May 2002 23:01:10 -0000 1.7
+++ packages/devs/serial/arm/ebsa285/current/ChangeLog 24 Feb 2003 06:46:18 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_ebsa285.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_arm_ebsa285.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/arm/ebsa285/current/cdl/ser_arm_ebsa285.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/ebsa285/current/cdl/ser_arm_ebsa285.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_arm_ebsa285.cdl
--- packages/devs/serial/arm/ebsa285/current/cdl/ser_arm_ebsa285.cdl 23 May 2002 23:01:10 -0000 1.6
+++ packages/devs/serial/arm/ebsa285/current/cdl/ser_arm_ebsa285.cdl 24 Feb 2003 06:46:18 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_EBSA285
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
StrongARM/EBSA285."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a ebsa285_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/arm/edb7xxx/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/edb7xxx/current/ChangeLog,v
retrieving revision 1.8
diff -u -5 -p -r1.8 ChangeLog
--- packages/devs/serial/arm/edb7xxx/current/ChangeLog 23 May 2002 23:01:10 -0000 1.8
+++ packages/devs/serial/arm/edb7xxx/current/ChangeLog 24 Feb 2003 06:46:19 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_edb7xxx.cdl: Remove irrelevant doc link.
+
2001-10-12 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_arm_edb7xxx.cdl: Clarify package description strings.
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
Index: packages/devs/serial/arm/edb7xxx/current/cdl/ser_arm_edb7xxx.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/edb7xxx/current/cdl/ser_arm_edb7xxx.cdl,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ser_arm_edb7xxx.cdl
--- packages/devs/serial/arm/edb7xxx/current/cdl/ser_arm_edb7xxx.cdl 23 May 2002 23:01:11 -0000 1.7
+++ packages/devs/serial/arm/edb7xxx/current/cdl/ser_arm_edb7xxx.cdl 24 Feb 2003 06:46:19 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_EDB7XXX
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
Cirrus Logic ARM based development boards."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a edb7xxx_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/arm/integrator/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/integrator/current/ChangeLog,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ChangeLog
--- packages/devs/serial/arm/integrator/current/ChangeLog 23 May 2002 23:01:11 -0000 1.3
+++ packages/devs/serial/arm/integrator/current/ChangeLog 24 Feb 2003 06:46:19 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_integrator.cdl: Remove irrelevant doc link.
+
2002-03-06 Nick Garnett <nickg at redhat dot com>
* cdl/ser_arm_integrator.cdl:
Disable testing of 57600 and 115200 baud rates. The CPUs we are
currently using (ARM7TDMI and ARM966E) have no cache and are too
Index: packages/devs/serial/arm/integrator/current/cdl/ser_arm_integrator.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/integrator/current/cdl/ser_arm_integrator.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ser_arm_integrator.cdl
--- packages/devs/serial/arm/integrator/current/cdl/ser_arm_integrator.cdl 23 May 2002 23:01:11 -0000 1.3
+++ packages/devs/serial/arm/integrator/current/cdl/ser_arm_integrator.cdl 24 Feb 2003 06:46:19 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_INTEGRA
requires CYGPKG_ERROR
include_dir cyg/io
description "
This option enables the serial device drivers for the
ARM INTEGRATOR."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a integrator_serial_with_ints.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/arm/iop310/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/iop310/current/ChangeLog,v
retrieving revision 1.1
diff -u -5 -p -r1.1 ChangeLog
--- packages/devs/serial/arm/iop310/current/ChangeLog 12 Nov 2002 17:38:41 -0000 1.1
+++ packages/devs/serial/arm/iop310/current/ChangeLog 24 Feb 2003 06:46:19 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_iop310.cdl: Remove irrelevant doc link.
+
2002-11-12 Gary Thomas <gary at mlbassoc dot com>
* include/arm_iop310_ser.inl:
* cdl/ser_arm_iop310.cdl: New Xscale platforms layout.
Index: packages/devs/serial/arm/iop310/current/cdl/ser_arm_iop310.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/iop310/current/cdl/ser_arm_iop310.cdl,v
retrieving revision 1.1
diff -u -5 -p -r1.1 ser_arm_iop310.cdl
--- packages/devs/serial/arm/iop310/current/cdl/ser_arm_iop310.cdl 12 Nov 2002 17:38:41 -0000 1.1
+++ packages/devs/serial/arm/iop310/current/cdl/ser_arm_iop310.cdl 24 Feb 2003 06:46:19 -0000
@@ -62,11 +62,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_XSCALE_
include_dir cyg/io
description "
This option enables the serial device drivers for the
Xscale board using the IOP310 chipset."
- doc redirect/ecos-device-drivers.html
# FIXME: This really belongs in the GENERIC_16X5X package
cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
display "Generic 16x5x serial driver required"
}
Index: packages/devs/serial/arm/iq80321/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/iq80321/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/arm/iq80321/current/ChangeLog 23 May 2002 23:01:12 -0000 1.2
+++ packages/devs/serial/arm/iq80321/current/ChangeLog 24 Feb 2003 06:46:19 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_iq80321.cdl: Remove irrelevant doc link.
+
2002-01-25 Nick Garnett <nickg at redhat dot com>
* include/arm_iq80321_ser.inl:
* cdl/ser_arm_iq80321.cdl:
IQ80321 files created, by copying the IQ80310 versions and editing.
Index: packages/devs/serial/arm/iq80321/current/cdl/ser_arm_iq80321.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/iq80321/current/cdl/ser_arm_iq80321.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ser_arm_iq80321.cdl
--- packages/devs/serial/arm/iq80321/current/cdl/ser_arm_iq80321.cdl 23 May 2002 23:01:12 -0000 1.2
+++ packages/devs/serial/arm/iq80321/current/cdl/ser_arm_iq80321.cdl 24 Feb 2003 06:46:19 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_IQ80321
include_dir cyg/io
description "
This option enables the serial device drivers for the
IQ80321 evaluation board."
- doc redirect/ecos-device-drivers.html
# FIXME: This really belongs in the GENERIC_16X5X package
cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
display "Generic 16x5x serial driver required"
}
Index: packages/devs/serial/arm/pid/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/pid/current/ChangeLog,v
retrieving revision 1.9
diff -u -5 -p -r1.9 ChangeLog
--- packages/devs/serial/arm/pid/current/ChangeLog 23 May 2002 23:01:12 -0000 1.9
+++ packages/devs/serial/arm/pid/current/ChangeLog 24 Feb 2003 06:46:20 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_pid.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_arm_pid.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/arm/pid/current/cdl/ser_arm_pid.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/pid/current/cdl/ser_arm_pid.cdl,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ser_arm_pid.cdl
--- packages/devs/serial/arm/pid/current/cdl/ser_arm_pid.cdl 23 May 2002 23:01:14 -0000 1.7
+++ packages/devs/serial/arm/pid/current/cdl/ser_arm_pid.cdl 24 Feb 2003 06:46:20 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_PID {
include_dir cyg/io
description "
This option enables the serial device drivers for the
ARM PID."
- doc redirect/ecos-device-drivers.html
# FIXME: This really belongs in the GENERIC_16X5X package
cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
display "Generic 16x5x serial driver required"
}
Index: packages/devs/serial/arm/sa11x0/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/sa11x0/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/serial/arm/sa11x0/current/ChangeLog 23 May 2002 23:01:18 -0000 1.7
+++ packages/devs/serial/arm/sa11x0/current/ChangeLog 24 Feb 2003 06:46:20 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_arm_sa11x0.cdl: Remove irrelevant doc link.
+
2001-10-09 Hugo Tyson <hmt at redhat dot com>
* src/sa11x0_serial.c (sa11x0_serial_DSR): Acknowledge the
interrupts for start or end of a line break, otherwise messing
with the wiring can cause an interrupt loop and hang the target.
Index: packages/devs/serial/arm/sa11x0/current/cdl/ser_arm_sa11x0.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/arm/sa11x0/current/cdl/ser_arm_sa11x0.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ser_arm_sa11x0.cdl
--- packages/devs/serial/arm/sa11x0/current/cdl/ser_arm_sa11x0.cdl 23 May 2002 23:01:19 -0000 1.5
+++ packages/devs/serial/arm/sa11x0/current/cdl/ser_arm_sa11x0.cdl 24 Feb 2003 06:46:20 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_ARM_SA11X0
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
StrongARM SA11X0."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a sa11x0_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/generic/16x5x/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/generic/16x5x/current/ChangeLog,v
retrieving revision 1.9
diff -u -5 -p -r1.9 ChangeLog
--- packages/devs/serial/generic/16x5x/current/ChangeLog 23 May 2002 23:01:19 -0000 1.9
+++ packages/devs/serial/generic/16x5x/current/ChangeLog 24 Feb 2003 06:46:20 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_generic_16x5x.cdl: Remove irrelevant doc link.
+
2001-06-19 Jesper Skov <jskov at redhat dot com>
* cdl/ser_generic_16x5x.cdl: Only define
CYGDAT_IO_SERIAL_DEVICE_HEADER when necessary.
Index: packages/devs/serial/generic/16x5x/current/cdl/ser_generic_16x5x.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/generic/16x5x/current/cdl/ser_generic_16x5x.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ser_generic_16x5x.cdl
--- packages/devs/serial/generic/16x5x/current/cdl/ser_generic_16x5x.cdl 23 May 2002 23:01:19 -0000 1.5
+++ packages/devs/serial/generic/16x5x/current/cdl/ser_generic_16x5x.cdl 24 Feb 2003 06:46:20 -0000
@@ -62,11 +62,10 @@ cdl_package CYGPKG_IO_SERIAL_GENERIC_16X
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
16x5x compatiple controllers."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a ser_16x5x.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/h8300/h8300h/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/h8300/h8300h/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/h8300/h8300h/current/ChangeLog 23 May 2002 23:01:19 -0000 1.2
+++ packages/devs/serial/h8300/h8300h/current/ChangeLog 24 Feb 2003 06:46:20 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/serial_h8300.cdl: Remove irrelevant doc link.
+
2002-04-24 Yoshinori Sato <qzb04471 at nifty dot ne dot jp>
* New package.
//===========================================================================
Index: packages/devs/serial/h8300/h8300h/current/cdl/serial_h8300.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/h8300/h8300h/current/cdl/serial_h8300.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 serial_h8300.cdl
--- packages/devs/serial/h8300/h8300h/current/cdl/serial_h8300.cdl 23 May 2002 23:01:19 -0000 1.2
+++ packages/devs/serial/h8300/h8300h/current/cdl/serial_h8300.cdl 24 Feb 2003 06:46:20 -0000
@@ -62,11 +62,10 @@ cdl_package CYGPKG_IO_SERIAL_H8300_SCI {
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
SCI module in Hitachi H8/300 CPUs."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a h8300_sci_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/i386/pc/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/i386/pc/current/ChangeLog,v
retrieving revision 1.8
diff -u -5 -p -r1.8 ChangeLog
--- packages/devs/serial/i386/pc/current/ChangeLog 23 May 2002 23:01:19 -0000 1.8
+++ packages/devs/serial/i386/pc/current/ChangeLog 24 Feb 2003 06:46:20 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_i386_pc.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_i386_pc.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/i386/pc/current/cdl/ser_i386_pc.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/i386/pc/current/cdl/ser_i386_pc.cdl,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ser_i386_pc.cdl
--- packages/devs/serial/i386/pc/current/cdl/ser_i386_pc.cdl 23 May 2002 23:01:20 -0000 1.7
+++ packages/devs/serial/i386/pc/current/cdl/ser_i386_pc.cdl 24 Feb 2003 06:46:21 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_I386_PC {
requires CYGPKG_ERROR
include_dir cyg/io
description "
This option enables the serial device drivers for the
PC."
- doc redirect/ecos-device-drivers.html
# FIXME: This really belongs in the GENERIC_16X5X package
cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
display "Generic 16x5x serial driver required"
}
Index: packages/devs/serial/loop/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/loop/current/ChangeLog,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ChangeLog
--- packages/devs/serial/loop/current/ChangeLog 23 May 2002 23:01:20 -0000 1.5
+++ packages/devs/serial/loop/current/ChangeLog 24 Feb 2003 06:46:21 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_loop.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_loop.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/loop/current/cdl/ser_loop.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/loop/current/cdl/ser_loop.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ser_loop.cdl
--- packages/devs/serial/loop/current/cdl/ser_loop.cdl 23 May 2002 23:01:20 -0000 1.5
+++ packages/devs/serial/loop/current/cdl/ser_loop.cdl 24 Feb 2003 06:46:21 -0000
@@ -55,11 +55,10 @@ cdl_package CYGPKG_IO_SERIAL_LOOP {
parent CYGPKG_IO_SERIAL_DEVICES
active_if CYGPKG_IO_SERIAL
requires CYGPKG_ERROR
include_dir cyg/io
include_files ; # none _exported_ whatsoever
- doc redirect/ecos-device-drivers.html
description "
This package contains the loop serial device driver."
compile -library=libextras.a loop_serial.c
Index: packages/devs/serial/mcf52xx/mcf5272/current/ChangeLog
===================================================================
RCS file: packages/devs/serial/mcf52xx/mcf5272/current/ChangeLog
diff -N packages/devs/serial/mcf52xx/mcf5272/current/ChangeLog
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ packages/devs/serial/mcf52xx/mcf5272/current/ChangeLog 24 Feb 2003 06:46:21 -0000
@@ -0,0 +1,38 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_mcf5272_uart.cdl: Remove irrelevant doc link.
+
+//===========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//===========================================================================
Index: packages/devs/serial/mcf52xx/mcf5272/current/cdl/ser_mcf5272_uart.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mcf52xx/mcf5272/current/cdl/ser_mcf5272_uart.cdl,v
retrieving revision 1.1
diff -u -5 -p -r1.1 ser_mcf5272_uart.cdl
--- packages/devs/serial/mcf52xx/mcf5272/current/cdl/ser_mcf5272_uart.cdl 29 May 2002 18:28:06 -0000 1.1
+++ packages/devs/serial/mcf52xx/mcf5272/current/cdl/ser_mcf5272_uart.cdl 24 Feb 2003 06:46:21 -0000
@@ -47,11 +47,10 @@ cdl_package CYGPKG_IO_SERIAL_MCF5272_UAR
requires CYGPKG_ERROR
include_dir cyg/io
description "
This option enables the serial device drivers for the
GMPU boards."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a ser_mcf5272_uart.c
#define_proc {
# puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/mips/atlas/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/atlas/current/ChangeLog,v
retrieving revision 1.4
diff -u -5 -p -r1.4 ChangeLog
--- packages/devs/serial/mips/atlas/current/ChangeLog 23 May 2002 23:01:20 -0000 1.4
+++ packages/devs/serial/mips/atlas/current/ChangeLog 24 Feb 2003 06:46:21 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_mips_atlas.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_mips_atlas.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/mips/atlas/current/cdl/ser_mips_atlas.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/atlas/current/cdl/ser_mips_atlas.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 ser_mips_atlas.cdl
--- packages/devs/serial/mips/atlas/current/cdl/ser_mips_atlas.cdl 23 May 2002 23:01:20 -0000 1.4
+++ packages/devs/serial/mips/atlas/current/cdl/ser_mips_atlas.cdl 24 Feb 2003 06:46:21 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_MIPS_ATLAS
include_dir cyg/io
# include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
MIPS ATLAS."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a atlas_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/mips/idt79s334a/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/idt79s334a/current/ChangeLog,v
retrieving revision 1.1
diff -u -5 -p -r1.1 ChangeLog
--- packages/devs/serial/mips/idt79s334a/current/ChangeLog 14 Feb 2003 01:44:03 -0000 1.1
+++ packages/devs/serial/mips/idt79s334a/current/ChangeLog 24 Feb 2003 06:46:21 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_mipsidt_334a.cdl: Remove irrelevant doc link.
+
2003-02-13 Tim Michals <t dot michals at attbi dot com>
2003-02-13 Jonathan Larmour <jifl at eCosCentric dot com>
* New package - support for MIPS IDT 79s334a board.
Index: packages/devs/serial/mips/idt79s334a/current/cdl/ser_mipsidt_334a.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/idt79s334a/current/cdl/ser_mipsidt_334a.cdl,v
retrieving revision 1.1
diff -u -5 -p -r1.1 ser_mipsidt_334a.cdl
--- packages/devs/serial/mips/idt79s334a/current/cdl/ser_mipsidt_334a.cdl 14 Feb 2003 01:44:03 -0000 1.1
+++ packages/devs/serial/mips/idt79s334a/current/cdl/ser_mipsidt_334a.cdl 24 Feb 2003 06:46:21 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_MIPS_IDT79S
include_dir cyg/io
# include_files ; # none _exported_ whatsoever
description "
This package contains the serial device drivers for the
MIPS IDT79RC32334 reference platform."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a mipsidt_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/mips/jmr3904/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/jmr3904/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/serial/mips/jmr3904/current/ChangeLog 23 May 2002 23:01:20 -0000 1.7
+++ packages/devs/serial/mips/jmr3904/current/ChangeLog 24 Feb 2003 06:46:21 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_mips_jmr3904.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_mips_jmr3904.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/mips/jmr3904/current/cdl/ser_mips_jmr3904.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/jmr3904/current/cdl/ser_mips_jmr3904.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_mips_jmr3904.cdl
--- packages/devs/serial/mips/jmr3904/current/cdl/ser_mips_jmr3904.cdl 23 May 2002 23:01:21 -0000 1.6
+++ packages/devs/serial/mips/jmr3904/current/cdl/ser_mips_jmr3904.cdl 24 Feb 2003 06:46:21 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_TX39_JMR390
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
TX39 JMR3904."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a tx3904_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/mips/ref4955/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/ref4955/current/ChangeLog,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ChangeLog
--- packages/devs/serial/mips/ref4955/current/ChangeLog 23 May 2002 23:01:21 -0000 1.3
+++ packages/devs/serial/mips/ref4955/current/ChangeLog 24 Feb 2003 06:46:22 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_mips_ref4955.cdl: Remove irrelevant doc link.
+
2000-09-18 Jesper Skov <jskov at redhat dot com>
* cdl/ser_mips_ref4955.cdl: Use CDL to specify testing parameters.
* include/mips_tx49_ref4955_ser.inl: Follow type naming changes in
Index: packages/devs/serial/mips/ref4955/current/cdl/ser_mips_ref4955.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/ref4955/current/cdl/ser_mips_ref4955.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ser_mips_ref4955.cdl
--- packages/devs/serial/mips/ref4955/current/cdl/ser_mips_ref4955.cdl 23 May 2002 23:01:21 -0000 1.3
+++ packages/devs/serial/mips/ref4955/current/cdl/ser_mips_ref4955.cdl 24 Feb 2003 06:46:22 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_MIPS_REF495
include_dir cyg/io
description "
This option enables the serial device drivers for the
REF4955."
- doc redirect/ecos-device-drivers.html
# FIXME: This really belongs in the GENERIC_16X5X package
cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
display "Generic 16x5x serial driver required"
}
Index: packages/devs/serial/mips/upd985xx/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/upd985xx/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/mips/upd985xx/current/ChangeLog 23 May 2002 23:01:21 -0000 1.2
+++ packages/devs/serial/mips/upd985xx/current/ChangeLog 24 Feb 2003 06:46:22 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_mips_upd985xx.cdl: Remove irrelevant doc link.
+
2002-02-11 Jesper Skov <jskov at redhat dot com>
* src/upd985xx_serial.c (upd985xx_serial_init): Fix compile error.
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
Index: packages/devs/serial/mips/upd985xx/current/cdl/ser_mips_upd985xx.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/upd985xx/current/cdl/ser_mips_upd985xx.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ser_mips_upd985xx.cdl
--- packages/devs/serial/mips/upd985xx/current/cdl/ser_mips_upd985xx.cdl 23 May 2002 23:01:21 -0000 1.2
+++ packages/devs/serial/mips/upd985xx/current/cdl/ser_mips_upd985xx.cdl 24 Feb 2003 06:46:22 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_MIPS_UPD985
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
NEC MIPS uPD985xx system-on-chip device."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a upd985xx_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/mips/vrc437x/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/vrc437x/current/ChangeLog,v
retrieving revision 1.4
diff -u -5 -p -r1.4 ChangeLog
--- packages/devs/serial/mips/vrc437x/current/ChangeLog 23 May 2002 23:01:21 -0000 1.4
+++ packages/devs/serial/mips/vrc437x/current/ChangeLog 24 Feb 2003 06:46:22 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_mips_vrc437x.cdl: Remove irrelevant doc link.
+
2001-09-18 Nick Garnett <nickg at redhat dot com>
* cdl/ser_mips_vrc437x.cdl:
* src/vrc437x_serial.h:
* src/vrc437x_serial.c:
Index: packages/devs/serial/mips/vrc437x/current/cdl/ser_mips_vrc437x.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mips/vrc437x/current/cdl/ser_mips_vrc437x.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 ser_mips_vrc437x.cdl
--- packages/devs/serial/mips/vrc437x/current/cdl/ser_mips_vrc437x.cdl 23 May 2002 23:01:21 -0000 1.4
+++ packages/devs/serial/mips/vrc437x/current/cdl/ser_mips_vrc437x.cdl 24 Feb 2003 06:46:23 -0000
@@ -61,11 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_MIPS_VRC437
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
VRC437X."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a vrc437x_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/mn10300/mn10300/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mn10300/mn10300/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/devs/serial/mn10300/mn10300/current/ChangeLog 23 May 2002 23:01:22 -0000 1.6
+++ packages/devs/serial/mn10300/mn10300/current/ChangeLog 24 Feb 2003 06:46:23 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_mn10300.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_mn10300.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/mn10300/mn10300/current/cdl/ser_mn10300.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/mn10300/mn10300/current/cdl/ser_mn10300.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ser_mn10300.cdl
--- packages/devs/serial/mn10300/mn10300/current/cdl/ser_mn10300.cdl 23 May 2002 23:01:22 -0000 1.5
+++ packages/devs/serial/mn10300/mn10300/current/cdl/ser_mn10300.cdl 24 Feb 2003 06:46:23 -0000
@@ -64,11 +64,10 @@ cdl_package CYGPKG_IO_SERIAL_MN10300 {
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
MN10300."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a mn10300_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/powerpc/cme555/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/cme555/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/powerpc/cme555/current/ChangeLog 23 May 2002 23:01:22 -0000 1.2
+++ packages/devs/serial/powerpc/cme555/current/ChangeLog 24 Feb 2003 06:46:23 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_powerpc_cme555.cdl: Remove irrelevant doc link.
+
2002-04-24 Bob Koninckx <bob dot koninckx at mech dot kuleuven dot ac dot be>
* New package.
//===========================================================================
Index: packages/devs/serial/powerpc/cme555/current/cdl/ser_powerpc_cme555.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/cme555/current/cdl/ser_powerpc_cme555.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ser_powerpc_cme555.cdl
--- packages/devs/serial/powerpc/cme555/current/cdl/ser_powerpc_cme555.cdl 23 May 2002 23:01:22 -0000 1.2
+++ packages/devs/serial/powerpc/cme555/current/cdl/ser_powerpc_cme555.cdl 24 Feb 2003 06:46:23 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_POWERPC_CME
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
cme555 mpc555 development board."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a cme555_serial_with_ints.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/powerpc/cogent/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/cogent/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/serial/powerpc/cogent/current/ChangeLog 23 May 2002 23:01:22 -0000 1.7
+++ packages/devs/serial/powerpc/cogent/current/ChangeLog 24 Feb 2003 06:46:24 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_powerpc_cogent.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_powerpc_cogent.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/powerpc/cogent/current/cdl/ser_powerpc_cogent.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/cogent/current/cdl/ser_powerpc_cogent.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_powerpc_cogent.cdl
--- packages/devs/serial/powerpc/cogent/current/cdl/ser_powerpc_cogent.cdl 23 May 2002 23:01:22 -0000 1.6
+++ packages/devs/serial/powerpc/cogent/current/cdl/ser_powerpc_cogent.cdl 24 Feb 2003 06:46:24 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_POWERPC_COG
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
Cogent PowerPC."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a cogent_serial_with_ints.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/powerpc/ec555/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/ec555/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/powerpc/ec555/current/ChangeLog 23 May 2002 23:01:22 -0000 1.2
+++ packages/devs/serial/powerpc/ec555/current/ChangeLog 24 Feb 2003 06:46:24 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_powerpc_ec555.cdl: Remove irrelevant doc link.
+
2002-04-24 Bob Koninckx <bob dot koninckx at mech dot kuleuven dot ac dot be>
* New package.
//===========================================================================
Index: packages/devs/serial/powerpc/ec555/current/cdl/ser_powerpc_ec555.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/ec555/current/cdl/ser_powerpc_ec555.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ser_powerpc_ec555.cdl
--- packages/devs/serial/powerpc/ec555/current/cdl/ser_powerpc_ec555.cdl 23 May 2002 23:01:22 -0000 1.2
+++ packages/devs/serial/powerpc/ec555/current/cdl/ser_powerpc_ec555.cdl 24 Feb 2003 06:46:24 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_POWERPC_EC5
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
ec555 mpc555 development board."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a ec555_serial_with_ints.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/powerpc/quicc/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/quicc/current/ChangeLog,v
retrieving revision 1.12
diff -u -5 -p -r1.12 ChangeLog
--- packages/devs/serial/powerpc/quicc/current/ChangeLog 10 Dec 2002 15:40:20 -0000 1.12
+++ packages/devs/serial/powerpc/quicc/current/ChangeLog 24 Feb 2003 06:46:25 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_quicc_smc.cdl: Remove irrelevant doc link.
+
2002-12-10 Gary Thomas <gthomas at ecoscentric dot com>
* cdl/ser_quicc_smc.cdl: Only enable devices which exist - as described
by the HAL/CDL interfaces.
Index: packages/devs/serial/powerpc/quicc/current/cdl/ser_quicc_smc.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/quicc/current/cdl/ser_quicc_smc.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_quicc_smc.cdl
--- packages/devs/serial/powerpc/quicc/current/cdl/ser_quicc_smc.cdl 10 Dec 2002 15:40:21 -0000 1.6
+++ packages/devs/serial/powerpc/quicc/current/cdl/ser_quicc_smc.cdl 24 Feb 2003 06:46:25 -0000
@@ -62,11 +62,10 @@ cdl_package CYGPKG_IO_SERIAL_POWERPC_QUI
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
PowerPC QUICC/SMC."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a quicc_smc_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/powerpc/quicc2/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/quicc2/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/powerpc/quicc2/current/ChangeLog 24 Jan 2003 15:13:25 -0000 1.2
+++ packages/devs/serial/powerpc/quicc2/current/ChangeLog 24 Feb 2003 06:46:25 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_quicc2_scc.cdl: Remove irrelevant doc link.
+
2003-01-24 Gary Thomas <gary at mlbassoc dot com> (inspired by)
2003-01-24 Christoph Csebits <christoph dot csebits at frequentis dot com>
* src/quicc2_scc_serial.h: Remove invalid ";" from #defines
Index: packages/devs/serial/powerpc/quicc2/current/cdl/ser_quicc2_scc.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/powerpc/quicc2/current/cdl/ser_quicc2_scc.cdl,v
retrieving revision 1.1
diff -u -5 -p -r1.1 ser_quicc2_scc.cdl
--- packages/devs/serial/powerpc/quicc2/current/cdl/ser_quicc2_scc.cdl 12 Dec 2002 21:15:30 -0000 1.1
+++ packages/devs/serial/powerpc/quicc2/current/cdl/ser_quicc2_scc.cdl 24 Feb 2003 06:46:25 -0000
@@ -62,11 +62,10 @@ cdl_package CYGPKG_IO_SERIAL_POWERPC_QUI
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
PowerPC QUICC2/SCC."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a quicc2_scc_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/sh/cq7708/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/cq7708/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/devs/serial/sh/cq7708/current/ChangeLog 23 May 2002 23:01:23 -0000 1.6
+++ packages/devs/serial/sh/cq7708/current/ChangeLog 24 Feb 2003 06:46:25 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_sh_cq7708.cdl: Remove irrelevant doc link.
+
2002-05-08 Jesper Skov <jskov at redhat dot com>
* include/sh_sh3_cq7708_sci.inl: Serial register renaming.
2002-04-23 Jesper Skov <jskov at redhat dot com>
Index: packages/devs/serial/sh/cq7708/current/cdl/ser_sh_cq7708.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/cq7708/current/cdl/ser_sh_cq7708.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ser_sh_cq7708.cdl
--- packages/devs/serial/sh/cq7708/current/cdl/ser_sh_cq7708.cdl 23 May 2002 23:01:23 -0000 1.5
+++ packages/devs/serial/sh/cq7708/current/cdl/ser_sh_cq7708.cdl 24 Feb 2003 06:46:25 -0000
@@ -60,12 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_SH_CQ7708 {
include_dir cyg/io
description "
This option enables the serial device drivers for the
CQ SH3 cq7708 board, based on the generic SH SCI driver."
- doc redirect/ecos-device-drivers.html
-
# FIXME: This really belongs in the SH_SCI package
cdl_interface CYGINT_IO_SERIAL_SH_SCI_REQUIRED {
display "SH SCI driver required"
}
Index: packages/devs/serial/sh/edk7708/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/edk7708/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/serial/sh/edk7708/current/ChangeLog 23 May 2002 23:01:23 -0000 1.7
+++ packages/devs/serial/sh/edk7708/current/ChangeLog 24 Feb 2003 06:46:26 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_sh_edk7708.cdl: Remove irrelevant doc link.
+
2002-05-08 Jesper Skov <jskov at redhat dot com>
* include/sh_sh3_edk7708_sci.inl: Serial register renaming.
2002-04-23 Jesper Skov <jskov at redhat dot com>
Index: packages/devs/serial/sh/edk7708/current/cdl/ser_sh_edk7708.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/edk7708/current/cdl/ser_sh_edk7708.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_sh_edk7708.cdl
--- packages/devs/serial/sh/edk7708/current/cdl/ser_sh_edk7708.cdl 23 May 2002 23:01:23 -0000 1.6
+++ packages/devs/serial/sh/edk7708/current/cdl/ser_sh_edk7708.cdl 24 Feb 2003 06:46:26 -0000
@@ -61,12 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_SH_EDK7708
description "
This option enables the serial device drivers for the
Hitachi SH3 EDK7708 board, based on the generic SH SCI driver."
- doc redirect/ecos-device-drivers.html
-
# FIXME: This really belongs in the SH_SCI package
cdl_interface CYGINT_IO_SERIAL_SH_SCI_REQUIRED {
display "SH SCI driver required"
}
Index: packages/devs/serial/sh/sci/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/sci/current/ChangeLog,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ChangeLog
--- packages/devs/serial/sh/sci/current/ChangeLog 23 May 2002 23:01:23 -0000 1.5
+++ packages/devs/serial/sh/sci/current/ChangeLog 24 Feb 2003 06:46:26 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_sh_sci.cdl: Remove irrelevant doc link.
+
2002-05-08 Jesper Skov <jskov at redhat dot com>
* src/sh_sci_serial.c: Register renaming.
2002-04-23 Jesper Skov <jskov at redhat dot com>
Index: packages/devs/serial/sh/sci/current/cdl/ser_sh_sci.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/sci/current/cdl/ser_sh_sci.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 ser_sh_sci.cdl
--- packages/devs/serial/sh/sci/current/cdl/ser_sh_sci.cdl 23 May 2002 23:01:23 -0000 1.4
+++ packages/devs/serial/sh/sci/current/cdl/ser_sh_sci.cdl 24 Feb 2003 06:46:26 -0000
@@ -62,11 +62,10 @@ cdl_package CYGPKG_IO_SERIAL_SH_SCI {
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
SCI module in Hitachi SH CPUs."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a sh_sci_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/sh/scif/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/scif/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/serial/sh/scif/current/ChangeLog 23 May 2002 23:01:24 -0000 1.7
+++ packages/devs/serial/sh/scif/current/ChangeLog 24 Feb 2003 06:46:26 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_sh_scif.cdl: Remove irrelevant doc link.
+
2002-05-08 Jesper Skov <jskov at redhat dot com>
* src/sh_scif_serial.c: Added SH2 support. Added break interrupt
support. Added IrDA support. Added async RX/TX support. Added
support for platforms to add config keys and handle flow
Index: packages/devs/serial/sh/scif/current/cdl/ser_sh_scif.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/scif/current/cdl/ser_sh_scif.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ser_sh_scif.cdl
--- packages/devs/serial/sh/scif/current/cdl/ser_sh_scif.cdl 23 May 2002 23:01:24 -0000 1.5
+++ packages/devs/serial/sh/scif/current/cdl/ser_sh_scif.cdl 24 Feb 2003 06:46:26 -0000
@@ -62,11 +62,10 @@ cdl_package CYGPKG_IO_SERIAL_SH_SCIF {
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
SCIF module in Hitachi SH CPUs."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a sh_scif_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/sh/se77x9/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/se77x9/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/devs/serial/sh/se77x9/current/ChangeLog 23 May 2002 23:01:24 -0000 1.2
+++ packages/devs/serial/sh/se77x9/current/ChangeLog 24 Feb 2003 06:46:26 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_sh_se77x9.cdl: Remove irrelevant doc link.
+
2002-05-08 Jesper Skov <jskov at redhat dot com>
* include/sh_sh3_se77x9_scif.inl: CYGINT_IO_SERIAL_SH_SCIF_DMA is
now booldata. Rename sh3_scif to sh_scif. Register renaming.
Index: packages/devs/serial/sh/se77x9/current/cdl/ser_sh_se77x9.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sh/se77x9/current/cdl/ser_sh_se77x9.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ser_sh_se77x9.cdl
--- packages/devs/serial/sh/se77x9/current/cdl/ser_sh_se77x9.cdl 23 May 2002 23:01:24 -0000 1.2
+++ packages/devs/serial/sh/se77x9/current/cdl/ser_sh_se77x9.cdl 24 Feb 2003 06:46:26 -0000
@@ -61,12 +61,10 @@ cdl_package CYGPKG_IO_SERIAL_SH_SE77X9 {
description "
This option enables the serial device drivers for the
Hitachi SH3 SE77X9 board, based on the generic SH SCI driver."
- doc redirect/ecos-device-drivers.html
-
# FIXME: This really belongs in the SH_SCIF package
cdl_interface CYGINT_IO_SERIAL_SH_SCIF_REQUIRED {
display "SH SCI driver required"
}
Index: packages/devs/serial/sparclite/sleb/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sparclite/sleb/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/serial/sparclite/sleb/current/ChangeLog 23 May 2002 23:01:24 -0000 1.7
+++ packages/devs/serial/sparclite/sleb/current/ChangeLog 24 Feb 2003 06:46:27 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_sparclite_sleb.cdl: Remove irrelevant doc link.
+
2001-09-10 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_sparclite_sleb.cdl:
Fix 234000->230400 typo.
Index: packages/devs/serial/sparclite/sleb/current/cdl/ser_sparclite_sleb.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/sparclite/sleb/current/cdl/ser_sparclite_sleb.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_sparclite_sleb.cdl
--- packages/devs/serial/sparclite/sleb/current/cdl/ser_sparclite_sleb.cdl 23 May 2002 23:01:25 -0000 1.6
+++ packages/devs/serial/sparclite/sleb/current/cdl/ser_sparclite_sleb.cdl 24 Feb 2003 06:46:27 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_SPARCLITE_S
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
SPARClite SLEB."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a sleb_sdtr.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/serial/v85x/v850/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/v85x/v850/current/ChangeLog,v
retrieving revision 1.10
diff -u -5 -p -r1.10 ChangeLog
--- packages/devs/serial/v85x/v850/current/ChangeLog 23 May 2002 23:01:25 -0000 1.10
+++ packages/devs/serial/v85x/v850/current/ChangeLog 24 Feb 2003 06:46:27 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ser_v85x_v850.cdl: Remove irrelevant doc link.
+
2001-03-21 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/ser_v85x_v850.cdl: Default driver on if CYGPKG_IO_SERIAL_DEVICES
enabled - like other drivers.
Descriptions should not be specific to SA1.
Index: packages/devs/serial/v85x/v850/current/cdl/ser_v85x_v850.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/serial/v85x/v850/current/cdl/ser_v85x_v850.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ser_v85x_v850.cdl
--- packages/devs/serial/v85x/v850/current/cdl/ser_v85x_v850.cdl 23 May 2002 23:01:25 -0000 1.6
+++ packages/devs/serial/v85x/v850/current/cdl/ser_v85x_v850.cdl 24 Feb 2003 06:46:27 -0000
@@ -60,11 +60,10 @@ cdl_package CYGPKG_IO_SERIAL_V85X_V850 {
include_dir cyg/io
include_files ; # none _exported_ whatsoever
description "
This option enables the serial device drivers for the
NEC V850."
- doc redirect/ecos-device-drivers.html
compile -library=libextras.a v85x_v850_serial.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
Index: packages/devs/usb/nec_upd985xx/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/usb/nec_upd985xx/current/ChangeLog,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ChangeLog
--- packages/devs/usb/nec_upd985xx/current/ChangeLog 22 Jan 2003 10:52:13 -0000 1.5
+++ packages/devs/usb/nec_upd985xx/current/ChangeLog 24 Feb 2003 06:46:27 -0000
@@ -1,5 +1,14 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/usbs_upd985xx.cdl: Fix doc link.
+
+ * doc/usbs_upd985xx.sgml: Comment out DOCTYPE for now to allow building
+ with standard doc build.
+ Add an enclosing <reference> so it's structured better with standard
+ doc build.
+
2003-01-22 Anssi Pulkkinen <anssi dot pulkkinen at ascom dot ch>
* src/usbs_upd985xx.c (ep0_rx_dsr): After sending a stall response
on ep0, start a new receive process for the next control message.
Index: packages/devs/usb/nec_upd985xx/current/cdl/usbs_upd985xx.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/usb/nec_upd985xx/current/cdl/usbs_upd985xx.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 usbs_upd985xx.cdl
--- packages/devs/usb/nec_upd985xx/current/cdl/usbs_upd985xx.cdl 2 Dec 2002 20:48:25 -0000 1.3
+++ packages/devs/usb/nec_upd985xx/current/cdl/usbs_upd985xx.cdl 24 Feb 2003 06:46:28 -0000
@@ -52,11 +52,11 @@
cdl_package CYGPKG_DEVS_USB_UPD985XX {
display "NEC uPD985xx USB Device Driver"
include_dir "cyg/io/usb"
parent CYGPKG_USB
implements CYGHWR_IO_USB_SLAVE
- doc devs-usb-nec-upd985xx.html
+ doc ref/devs-usb-nec-upd985xx.html
# Make sure that we are running on the right hardware.
requires CYGPKG_HAL_MIPS
requires CYGPKG_HAL_MIPS_UPD985XX
Index: packages/devs/usb/nec_upd985xx/current/doc/usbs_upd985xx.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/usb/nec_upd985xx/current/doc/usbs_upd985xx.sgml,v
retrieving revision 1.3
diff -u -5 -p -r1.3 usbs_upd985xx.sgml
--- packages/devs/usb/nec_upd985xx/current/doc/usbs_upd985xx.sgml 15 Sep 2002 22:09:42 -0000 1.3
+++ packages/devs/usb/nec_upd985xx/current/doc/usbs_upd985xx.sgml 24 Feb 2003 06:46:28 -0000
@@ -1,6 +1,6 @@
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!-- DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
@@ -34,10 +34,13 @@
<!-- ####DESCRIPTIONEND#### -->
<!-- =============================================================== -->
<!-- }}} -->
+<reference id="devs-usb-nec-upd985xx-ref">
+ <title>NEC uPD985xx USB Device Driver</title>
+
<refentry id="devs-usb-nec-upd985xx">
<refmeta>
<refentrytitle>NEC uPD985xx USB Device Driver</refentrytitle>
</refmeta>
<refnamediv>
@@ -249,5 +252,6 @@ current platform defines such a macro, t
invoke it during the endpoint 0 start-up operation.
</para>
</refsect1>
</refentry>
+</reference>
Index: packages/devs/usb/sa11x0/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/usb/sa11x0/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/devs/usb/sa11x0/current/ChangeLog 23 May 2002 23:01:26 -0000 1.7
+++ packages/devs/usb/sa11x0/current/ChangeLog 24 Feb 2003 06:46:28 -0000
@@ -1,5 +1,14 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/usbs_sa11x0.cdl: Fix doc link.
+
+ * doc/usbs_sa11x0.sgml: Comment out DOCTYPE for now to allow building
+ with standard doc build.
+ Add an enclosing <reference> so it's structured better with standard
+ doc build.
+
2002-02-11 Bart Veer <bartv at redhat dot com>
* src/usbs_sa11x0.c:
Add a handler for the SET_INTERFACE standard control message.
This should not be needed, but appears to avoid hardware problems
Index: packages/devs/usb/sa11x0/current/cdl/usbs_sa11x0.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/usb/sa11x0/current/cdl/usbs_sa11x0.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 usbs_sa11x0.cdl
--- packages/devs/usb/sa11x0/current/cdl/usbs_sa11x0.cdl 23 May 2002 23:01:26 -0000 1.3
+++ packages/devs/usb/sa11x0/current/cdl/usbs_sa11x0.cdl 24 Feb 2003 06:46:28 -0000
@@ -51,11 +51,11 @@
cdl_package CYGPKG_DEVS_USB_SA11X0 {
display "SA11X0 USB Device Driver"
include_dir "cyg/io/usb"
parent CYGPKG_USB
implements CYGHWR_IO_USB_SLAVE
- doc devs-usb-sa11x0.html
+ doc ref/devs-usb-sa11x0.html
# Make sure that we are running on the right hardware.
requires CYGPKG_HAL_ARM
requires CYGPKG_HAL_ARM_SA11X0
Index: packages/devs/usb/sa11x0/current/doc/usbs_sa11x0.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/usb/sa11x0/current/doc/usbs_sa11x0.sgml,v
retrieving revision 1.4
diff -u -5 -p -r1.4 usbs_sa11x0.sgml
--- packages/devs/usb/sa11x0/current/doc/usbs_sa11x0.sgml 15 Sep 2002 22:09:53 -0000 1.4
+++ packages/devs/usb/sa11x0/current/doc/usbs_sa11x0.sgml 24 Feb 2003 06:46:28 -0000
@@ -1,6 +1,6 @@
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!-- DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
@@ -34,10 +34,13 @@
<!-- ####DESCRIPTIONEND#### -->
<!-- =============================================================== -->
<!-- }}} -->
+<reference id="devs-usb-sa11x0-ref">
+ <title>SA11X0 USB Device Driver</title>
+
<refentry id="devs-usb-sa11x0">
<refmeta>
<refentrytitle>SA11X0 USB Device Driver</refentrytitle>
</refmeta>
<refnamediv>
@@ -226,5 +229,6 @@ transferred is relatively small, because
will be raised and performance will suffer accordingly.
</para>
</refsect1>
</refentry>
+</reference>
Index: packages/devs/watchdog/synth/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/watchdog/synth/current/ChangeLog,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ChangeLog
--- packages/devs/watchdog/synth/current/ChangeLog 12 Feb 2003 17:22:57 -0000 1.3
+++ packages/devs/watchdog/synth/current/ChangeLog 24 Feb 2003 06:46:29 -0000
@@ -1,5 +1,14 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/synth_watchdog.cdl: Add doc link.
+
+ * doc/synth_watchdog.sgml: Comment out DOCTYPE for now to allow
+ building with standard doc build.
+ Add an enclosing <reference> so it's structured better with standard
+ doc build.
+
2003-02-12 Bart Veer <bartv at ecoscentric dot com>
* host/Makefile.in:
Regenerate after toplevel acinclude.m4 update
Index: packages/devs/watchdog/synth/current/cdl/synth_watchdog.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/watchdog/synth/current/cdl/synth_watchdog.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 synth_watchdog.cdl
--- packages/devs/watchdog/synth/current/cdl/synth_watchdog.cdl 16 Sep 2002 21:59:36 -0000 1.2
+++ packages/devs/watchdog/synth/current/cdl/synth_watchdog.cdl 24 Feb 2003 06:46:29 -0000
@@ -54,10 +54,11 @@ cdl_package CYGPKG_DEVS_WATCHDOG_SYNTH {
The watchdog driver for the eCos synthetic target provides
emulation of a watchdog device: if the eCos application starts
the watchdog and fails to reset it regularly then the host-side
support will detect this and kill the eCos application with a
SIGPWR signal."
+ doc ref/devs-watchdog-synth.html
parent CYGPKG_IO_WATCHDOG
active_if CYGPKG_IO_WATCHDOG
implements CYGINT_WATCHDOG_HW_IMPLEMENTATIONS
implements CYGINT_WATCHDOG_RESETS_ON_TIMEOUT
Index: packages/devs/watchdog/synth/current/doc/synth_watchdog.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/watchdog/synth/current/doc/synth_watchdog.sgml,v
retrieving revision 1.1
diff -u -5 -p -r1.1 synth_watchdog.sgml
--- packages/devs/watchdog/synth/current/doc/synth_watchdog.sgml 15 Sep 2002 17:50:27 -0000 1.1
+++ packages/devs/watchdog/synth/current/doc/synth_watchdog.sgml 24 Feb 2003 06:46:29 -0000
@@ -1,6 +1,6 @@
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!-- DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
@@ -31,10 +31,13 @@
<!-- ####DESCRIPTIONEND#### -->
<!-- =============================================================== -->
<!-- }}} -->
+<reference id="devs-watchdog-synth-ref">
+ <title>Synthetic Target Watchdog Device</title>
+
<refentry id="devs-watchdog-synth">
<refmeta>
<refentrytitle>Synthetic Target Watchdog Device</refentrytitle>
</refmeta>
<refnamediv>
@@ -332,5 +335,6 @@ The watchdog support does not provide an
variables for use by other scripts.
</para>
</refsect1>
</refentry>
+</reference>
Index: packages/fs/jffs2/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/fs/jffs2/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/fs/jffs2/current/ChangeLog 5 Feb 2003 02:04:54 -0000 1.6
+++ packages/fs/jffs2/current/ChangeLog 24 Feb 2003 06:46:30 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/jffs2.cdl: Fix doc link.
+
2003-02-05 Jonathan Larmour <jifl at eCosCentric dot com>
* cdl/jffs2.cdl: Remove unused flash geometry CDL options.
2003-02-04 Gary Thomas <gary at mlbassoc dot com> on behalf of
Index: packages/fs/jffs2/current/cdl/jffs2.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/fs/jffs2/current/cdl/jffs2.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 jffs2.cdl
--- packages/fs/jffs2/current/cdl/jffs2.cdl 5 Feb 2003 02:04:54 -0000 1.6
+++ packages/fs/jffs2/current/cdl/jffs2.cdl 24 Feb 2003 06:46:30 -0000
@@ -49,11 +49,11 @@
#
# ====================================================================
cdl_package CYGPKG_FS_JFFS2 {
display "JFFS2 filesystem"
- doc doc/index.html
+ doc ref/fileio.html
include_dir ""
requires CYGPKG_IO_FILEIO
requires CYGPKG_IO_FLASH
requires CYGPKG_COMPRESS_ZLIB
Index: packages/fs/ram/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/fs/ram/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/fs/ram/current/ChangeLog 3 Feb 2003 16:26:04 -0000 1.6
+++ packages/fs/ram/current/ChangeLog 24 Feb 2003 06:46:30 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ramfs.cdl: Fix doc link.
+
2002-12-06 Andrew Lunn <andrew dot lunn at ascom dot ch>
* cdl/ramfs.cdl: Implements the CYGINT_IO_FILEIO_FS interface
2002-01-25 Jonathan Larmour <jlarmour at redhat dot com>
Index: packages/fs/ram/current/cdl/ramfs.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/fs/ram/current/cdl/ramfs.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 ramfs.cdl
--- packages/fs/ram/current/cdl/ramfs.cdl 3 Feb 2003 16:26:04 -0000 1.4
+++ packages/fs/ram/current/cdl/ramfs.cdl 24 Feb 2003 06:46:30 -0000
@@ -49,11 +49,11 @@
#
# ====================================================================
cdl_package CYGPKG_FS_RAM {
display "RAM filesystem"
- doc doc/index.html
+ doc ref/fileio.html
include_dir cyg/ramfs
requires CYGPKG_IO_FILEIO
requires CYGPKG_ISOINFRA
Index: packages/fs/rom/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/fs/rom/current/ChangeLog,v
retrieving revision 1.9
diff -u -5 -p -r1.9 ChangeLog
--- packages/fs/rom/current/ChangeLog 3 Feb 2003 16:26:04 -0000 1.9
+++ packages/fs/rom/current/ChangeLog 24 Feb 2003 06:46:30 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/romfs.cdl: Fix doc link.
+
2003-01-30 Andrew Lunn <andrew dot lunn at ascom dot ch>
* cdl/romfs.cdl: Implements the CYGINT_IO_FILEIO_FS interface.
2003-01-29 John Dallaway <jld at ecoscentric dot com>
Index: packages/fs/rom/current/cdl/romfs.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/fs/rom/current/cdl/romfs.cdl,v
retrieving revision 1.7
diff -u -5 -p -r1.7 romfs.cdl
--- packages/fs/rom/current/cdl/romfs.cdl 3 Feb 2003 16:26:04 -0000 1.7
+++ packages/fs/rom/current/cdl/romfs.cdl 24 Feb 2003 06:46:30 -0000
@@ -49,11 +49,11 @@
#
# ====================================================================
cdl_package CYGPKG_FS_ROM {
display "ROM filesystem"
- doc doc/index.html
+ doc ref/fileio.html
include_dir cyg/romfs
requires CYGPKG_IO_FILEIO
requires CYGPKG_ISOINFRA
Index: packages/hal/common/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/hal/common/current/ChangeLog,v
retrieving revision 1.86
diff -u -5 -p -r1.86 ChangeLog
--- packages/hal/common/current/ChangeLog 13 Feb 2003 20:49:57 -0000 1.86
+++ packages/hal/common/current/ChangeLog 24 Feb 2003 06:46:35 -0000
@@ -1,5 +1,12 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/hal.cdl: Fix doc links.
+
+ * doc/hal.sgml: hal-common-current-doc-porting-sgml entity ->
+ hal-common-porting-sgml in line with other docs.
+
2003-02-13 Mark Salter <msalter at redhat dot com>
* src/gdb-fileio.h (FILEIO_O_BINARY): New flag.
(FILEIO_O_TEXT): New flag.
Index: packages/hal/common/current/cdl/hal.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/hal/common/current/cdl/hal.cdl,v
retrieving revision 1.19
diff -u -5 -p -r1.19 hal.cdl
--- packages/hal/common/current/cdl/hal.cdl 4 Dec 2002 14:29:12 -0000 1.19
+++ packages/hal/common/current/cdl/hal.cdl 24 Feb 2003 06:46:35 -0000
@@ -60,11 +60,11 @@ cdl_package CYGPKG_HAL {
one or more architectures, and for each architecture there
may be one or more supported platforms. It is necessary to
select one target architecture and one platform for that
architecture. There are also a number of configuration
options that are common to all HAL packages."
- doc redirect/the-ecos-hardware-abstraction-layer-hal.html
+ doc ref/the-ecos-hardware-abstraction-layer.html
compile drv_api.c
compile -library=libextras.a dummy.c
requires CYGPKG_INFRA
Index: packages/hal/common/current/doc/hal.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/hal/common/current/doc/hal.sgml,v
retrieving revision 1.3
diff -u -5 -p -r1.3 hal.sgml
--- packages/hal/common/current/doc/hal.sgml 1 Oct 2002 02:23:22 -0000 1.3
+++ packages/hal/common/current/doc/hal.sgml 24 Feb 2003 06:46:37 -0000
@@ -2935,11 +2935,11 @@ architecture, in particular where interr
</CHAPTER>
<!-- }}} -->
<!-- {{{ Porting Guide -->
-&hal-common-current-doc-porting-sgml;
+&hal-common-porting-sgml;
<!-- }}} -->
<!-- {{{ Future Developments -->
<CHAPTER id="hal-future-developments">
Index: packages/hal/synth/arch/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/hal/synth/arch/current/ChangeLog,v
retrieving revision 1.12
diff -u -5 -p -r1.12 ChangeLog
--- packages/hal/synth/arch/current/ChangeLog 12 Feb 2003 17:23:04 -0000 1.12
+++ packages/hal/synth/arch/current/ChangeLog 24 Feb 2003 06:46:43 -0000
@@ -1,5 +1,13 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * doc/overview.gif, doc/overview.fig: renamed to
+ synth-io-overview.gif and synth-io-overview.fig.
+ * doc/synth.sgml: Add some missing ">"s to header file names.
+ Comment out DOCTYPE for now to allow building with standard doc build.
+ overview.gif renamed as per above.
+
2003-02-12 Bart Veer <bartv at ecoscentric dot com>
* host/Makefile.am, host/Makefile.in, configure:
Regenerate after acinclude.m4 update
Index: packages/hal/synth/arch/current/doc/overview.fig
===================================================================
RCS file: packages/hal/synth/arch/current/doc/overview.fig
diff -N packages/hal/synth/arch/current/doc/overview.fig
--- packages/hal/synth/arch/current/doc/overview.fig 15 Sep 2002 17:52:19 -0000 1.1
+++ /dev/null 1 Jan 1970 00:00:00 -0000
@@ -1,57 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter
-100.00
-Single
--2
-1200 2
-2 2 0 1 0 7 50 0 -1 0.000 0 0 -1 0 0 5
- 300 300 3300 300 3300 1800 300 1800 300 300
-2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
- 2700 300 2700 1800
-2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
- 1800 300 1800 1800
-2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
- 1800 750 2700 750
-2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
- 1800 1350 2700 1350
-2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
- 5400 300 5400 1800
-2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
- 5400 750 6900 750
-2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
- 5400 1350 6900 1350
-2 2 0 1 0 7 50 0 -1 4.000 0 0 7 0 0 5
- 4200 300 6900 300 6900 1800 4200 1800 4200 300
-2 1 0 2 0 7 50 0 -1 6.000 0 0 7 1 1 2
- 1 1 2.00 120.00 240.00
- 1 1 2.00 120.00 240.00
- 3300 1050 4200 1050
-2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
- 1 1 1.00 60.00 120.00
- 1 1 1.00 60.00 120.00
- 6900 600 7500 600
-2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
- 1 1 1.00 60.00 120.00
- 1 1 1.00 60.00 120.00
- 6900 1125 7500 1125
-2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
- 1 1 1.00 60.00 120.00
- 1 1 1.00 60.00 120.00
- 6900 1650 7500 1650
-4 0 0 50 0 0 12 0.0000 4 135 375 2850 1200 HAL\001
-4 0 0 50 0 0 12 0.0000 4 135 585 1950 1650 console\001
-4 0 0 50 0 0 12 0.0000 4 135 690 1875 1200 /dev/ser0\001
-4 0 0 50 0 0 12 0.0000 4 135 330 2100 600 eth0\001
-4 0 0 50 0 0 12 0.0000 4 135 390 750 825 eCos\001
-4 0 0 50 0 0 12 0.0000 4 180 825 600 1200 application\001
-4 0 0 50 0 0 12 0.0000 4 180 975 4350 1200 I/O Auxiliary\001
-4 0 0 50 0 0 12 0.0000 4 180 690 4500 825 ecosynth\001
-4 0 0 50 0 0 12 0.0000 4 135 870 5775 675 ethernet.tcl\001
-4 0 0 50 0 0 12 0.0000 4 135 660 5775 1200 serial.tcl\001
-4 0 0 50 0 0 12 0.0000 4 135 825 5775 1725 console.tcl\001
-4 0 0 50 0 0 12 0.0000 4 180 795 7575 675 Linux tap3\001
-4 0 0 50 0 0 12 0.0000 4 180 765 7575 1200 /dev/ttyS1\001
-4 0 0 50 0 0 12 0.0000 4 135 135 7575 1725 X\001
Index: packages/hal/synth/arch/current/doc/overview.gif
===================================================================
RCS file: packages/hal/synth/arch/current/doc/overview.gif
diff -N packages/hal/synth/arch/current/doc/overview.gif
Binary files /sourceware/cvs-tmp/cvs1M8ZFL and /dev/null differ
Index: packages/hal/synth/arch/current/doc/synth-io-overview.fig
===================================================================
RCS file: packages/hal/synth/arch/current/doc/synth-io-overview.fig
diff -N packages/hal/synth/arch/current/doc/synth-io-overview.fig
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ packages/hal/synth/arch/current/doc/synth-io-overview.fig 24 Feb 2003 06:46:43 -0000
@@ -0,0 +1,57 @@
+#FIG 3.2
+Landscape
+Center
+Inches
+Letter
+100.00
+Single
+-2
+1200 2
+2 2 0 1 0 7 50 0 -1 0.000 0 0 -1 0 0 5
+ 300 300 3300 300 3300 1800 300 1800 300 300
+2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
+ 2700 300 2700 1800
+2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
+ 1800 300 1800 1800
+2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
+ 1800 750 2700 750
+2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
+ 1800 1350 2700 1350
+2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
+ 5400 300 5400 1800
+2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
+ 5400 750 6900 750
+2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
+ 5400 1350 6900 1350
+2 2 0 1 0 7 50 0 -1 4.000 0 0 7 0 0 5
+ 4200 300 6900 300 6900 1800 4200 1800 4200 300
+2 1 0 2 0 7 50 0 -1 6.000 0 0 7 1 1 2
+ 1 1 2.00 120.00 240.00
+ 1 1 2.00 120.00 240.00
+ 3300 1050 4200 1050
+2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
+ 1 1 1.00 60.00 120.00
+ 1 1 1.00 60.00 120.00
+ 6900 600 7500 600
+2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
+ 1 1 1.00 60.00 120.00
+ 1 1 1.00 60.00 120.00
+ 6900 1125 7500 1125
+2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
+ 1 1 1.00 60.00 120.00
+ 1 1 1.00 60.00 120.00
+ 6900 1650 7500 1650
+4 0 0 50 0 0 12 0.0000 4 135 375 2850 1200 HAL\001
+4 0 0 50 0 0 12 0.0000 4 135 585 1950 1650 console\001
+4 0 0 50 0 0 12 0.0000 4 135 690 1875 1200 /dev/ser0\001
+4 0 0 50 0 0 12 0.0000 4 135 330 2100 600 eth0\001
+4 0 0 50 0 0 12 0.0000 4 135 390 750 825 eCos\001
+4 0 0 50 0 0 12 0.0000 4 180 825 600 1200 application\001
+4 0 0 50 0 0 12 0.0000 4 180 975 4350 1200 I/O Auxiliary\001
+4 0 0 50 0 0 12 0.0000 4 180 690 4500 825 ecosynth\001
+4 0 0 50 0 0 12 0.0000 4 135 870 5775 675 ethernet.tcl\001
+4 0 0 50 0 0 12 0.0000 4 135 660 5775 1200 serial.tcl\001
+4 0 0 50 0 0 12 0.0000 4 135 825 5775 1725 console.tcl\001
+4 0 0 50 0 0 12 0.0000 4 180 795 7575 675 Linux tap3\001
+4 0 0 50 0 0 12 0.0000 4 180 765 7575 1200 /dev/ttyS1\001
+4 0 0 50 0 0 12 0.0000 4 135 135 7575 1725 X\001
Index: packages/hal/synth/arch/current/doc/synth-io-overview.gif
===================================================================
RCS file: packages/hal/synth/arch/current/doc/synth-io-overview.gif
diff -N packages/hal/synth/arch/current/doc/synth-io-overview.gif
Binary files /dev/null and synth-io-overview.gif differ
Index: packages/hal/synth/arch/current/doc/synth.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/hal/synth/arch/current/doc/synth.sgml,v
retrieving revision 1.3
diff -u -5 -p -r1.3 synth.sgml
--- packages/hal/synth/arch/current/doc/synth.sgml 15 Sep 2002 17:52:19 -0000 1.3
+++ packages/hal/synth/arch/current/doc/synth.sgml 24 Feb 2003 06:46:46 -0000
@@ -1,6 +1,6 @@
-<!DOCTYPE part PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!-- DOCTYPE part PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
@@ -133,11 +133,11 @@ functionality is similar to what will be
hardware for the application being developed.
</para>
<informalfigure PgWide=1>
<mediaobject>
<imageobject>
- <imagedata fileref="overview.gif" format="gif" Scalefit=1 Align="Center">
+ <imagedata fileref="synth-io-overview.gif" format="gif" Scalefit=1 Align="Center">
</imageobject>
</mediaobject>
</informalfigure>
<para>
A key requirement for synthetic target code is that the embedded
@@ -1281,11 +1281,11 @@ can be used by other scripts.
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcsynopsisinfo>
-#include <cyg/hal/hal_io.h
+#include <cyg/hal/hal_io.h>
</funcsynopsisinfo>
<funcprototype>
<funcdef>int <function>cyg_hal_sys_xyzzy</function></funcdef>
<varargs>
</funcprototype>
@@ -1393,11 +1393,11 @@ GNU C library sources.
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcsynopsisinfo>
-#include <cyg/hal/hal_io.h
+#include <cyg/hal/hal_io.h>
</funcsynopsisinfo>
<funcprototype>
<funcdef>int <function>synth_auxiliary_instantiate</function></funcdef>
<paramdef>const char* <parameter>package</parameter></paramdef>
Index: packages/io/common/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/common/current/ChangeLog,v
retrieving revision 1.16
diff -u -5 -p -r1.16 ChangeLog
--- packages/io/common/current/ChangeLog 23 May 2002 23:05:54 -0000 1.16
+++ packages/io/common/current/ChangeLog 24 Feb 2003 06:46:48 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/io.cdl: Fix doc link.
+
2002-03-12 Nick Garnett <nickg at redhat dot com>
* doc/io.sgml: Generally sorted out, reformetted, folded. SMP
considerations added to various parts of the document.
Index: packages/io/common/current/cdl/io.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/common/current/cdl/io.cdl,v
retrieving revision 1.6
diff -u -5 -p -r1.6 io.cdl
--- packages/io/common/current/cdl/io.cdl 23 May 2002 23:05:56 -0000 1.6
+++ packages/io/common/current/cdl/io.cdl 24 Feb 2003 06:46:48 -0000
@@ -49,11 +49,11 @@
#
# ====================================================================
cdl_package CYGPKG_IO {
display "I/O sub-system"
- doc redirect/ecos-device-drivers.html
+ doc ref/io.html
include_dir cyg/io
requires CYGPKG_ERROR
description "
The eCos system is supplied with a number of different
device drivers. This option enables the basic I/O system
Index: packages/io/eth/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/eth/current/ChangeLog,v
retrieving revision 1.39
diff -u -5 -p -r1.39 ChangeLog
--- packages/io/eth/current/ChangeLog 7 Feb 2003 00:27:08 -0000 1.39
+++ packages/io/eth/current/ChangeLog 24 Feb 2003 06:46:48 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/eth_drivers.cdl: Add doc link.
+
2003-02-07 Jonathan Larmour <jifl at eCosCentric dot com>
* src/net/eth_drv.c: If driver can't set multi-cast, indicate it's
only a warning.
Index: packages/io/eth/current/cdl/eth_drivers.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/eth/current/cdl/eth_drivers.cdl,v
retrieving revision 1.18
diff -u -5 -p -r1.18 eth_drivers.cdl
--- packages/io/eth/current/cdl/eth_drivers.cdl 14 Aug 2002 13:20:14 -0000 1.18
+++ packages/io/eth/current/cdl/eth_drivers.cdl 24 Feb 2003 06:46:48 -0000
@@ -52,10 +52,11 @@
cdl_package CYGPKG_IO_ETH_DRIVERS {
display "Common ethernet support"
include_dir cyg/io/eth
parent CYGPKG_IO
description "Platform independent ethernet drivers"
+ doc ref/io-eth-drv-generic.html
implements CYGPKG_NET_DRIVER_FRAMEWORK
cdl_interface CYGINT_IO_ETH_MULTICAST {
display "Driver supports multicast addressing"
Index: packages/io/fileio/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/fileio/current/ChangeLog,v
retrieving revision 1.27
diff -u -5 -p -r1.27 ChangeLog
--- packages/io/fileio/current/ChangeLog 21 Feb 2003 00:08:08 -0000 1.27
+++ packages/io/fileio/current/ChangeLog 24 Feb 2003 06:46:48 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/fileio.cdl: Add doc link.
+
2003-02-20 Bart Veer <bartv at ecoscentric dot com>
* cdl/fileio.cdl: identify test binaries, not test sources
2003-01-30 Andrew Lunn <andrew dot lunn at ascom dot ch>
Index: packages/io/fileio/current/cdl/fileio.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/fileio/current/cdl/fileio.cdl,v
retrieving revision 1.11
diff -u -5 -p -r1.11 fileio.cdl
--- packages/io/fileio/current/cdl/fileio.cdl 21 Feb 2003 00:08:11 -0000 1.11
+++ packages/io/fileio/current/cdl/fileio.cdl 24 Feb 2003 06:46:48 -0000
@@ -52,10 +52,11 @@
cdl_package CYGPKG_IO_FILEIO {
display "POSIX File IO compatibility layer"
description "This package enables the POSIX compatibility
layer that implements IEEE 1003.1 file IO."
include_dir cyg/fileio
+ doc ref/fileio.html
requires CYGPKG_ISOINFRA
requires CYGPKG_ERROR
requires CYGINT_ISO_ERRNO
requires CYGINT_ISO_ERRNO_CODES
Index: packages/io/flash/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/flash/current/ChangeLog,v
retrieving revision 1.23
diff -u -5 -p -r1.23 ChangeLog
--- packages/io/flash/current/ChangeLog 23 May 2002 23:06:13 -0000 1.23
+++ packages/io/flash/current/ChangeLog 24 Feb 2003 06:46:48 -0000
@@ -1,5 +1,10 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/io_flash.cdl: Remove irrelevant doc link - default to top
+ level.
+
2002-01-31 Jonathan Larmour <jlarmour at redhat dot com>
* src/flashiodev.c: Fix bounds checking and offsetting.
* cdl/io_flash.cdl (CYGNUM_IO_FLASH_BLOCK_LENGTH_1): Default to
Index: packages/io/flash/current/cdl/io_flash.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/flash/current/cdl/io_flash.cdl,v
retrieving revision 1.11
diff -u -5 -p -r1.11 io_flash.cdl
--- packages/io/flash/current/cdl/io_flash.cdl 23 May 2002 23:06:14 -0000 1.11
+++ packages/io/flash/current/cdl/io_flash.cdl 24 Feb 2003 06:46:48 -0000
@@ -53,11 +53,10 @@ cdl_package CYGPKG_IO_FLASH {
display "FLASH device drivers"
include_dir cyg/io
description "
This option enables drivers for basic I/O services on
flash devices."
- doc redirect/ecos-device-drivers.html
requires CYGPKG_ISOINFRA
requires CYGINT_ISO_STRING_STRFUNCS
compile flash.c
Index: packages/io/pci/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/pci/current/ChangeLog,v
retrieving revision 1.18
diff -u -5 -p -r1.18 ChangeLog
--- packages/io/pci/current/ChangeLog 21 Feb 2003 18:10:31 -0000 1.18
+++ packages/io/pci/current/ChangeLog 24 Feb 2003 06:46:48 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/io_pci.cdl: Fix doc link.
+
2003-02-21 Gary Thomas <gary at mlbassoc dot com>
* src/pci.c (cyg_pci_get_device_info): While scanning active
devices, remember the I/O and memory addresses they use. This
allows for new devices to be added which will not conflict.
Index: packages/io/pci/current/cdl/io_pci.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/pci/current/cdl/io_pci.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 io_pci.cdl
--- packages/io/pci/current/cdl/io_pci.cdl 23 May 2002 23:06:17 -0000 1.4
+++ packages/io/pci/current/cdl/io_pci.cdl 24 Feb 2003 06:46:48 -0000
@@ -48,11 +48,11 @@
#
# ====================================================================
cdl_package CYGPKG_IO_PCI {
display "PCI configuration library"
- doc redirect/ecos-device-drivers.html
+ doc ref/io-pci.html
include_dir cyg/io
parent CYGPKG_IO
description "
The PCI configuration library provides initialization of devices
on the PCI bus. Functions to find and access these devices are
Index: packages/io/pcmcia/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/pcmcia/current/ChangeLog,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ChangeLog
--- packages/io/pcmcia/current/ChangeLog 23 May 2002 23:06:21 -0000 1.5
+++ packages/io/pcmcia/current/ChangeLog 24 Feb 2003 06:46:48 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/io_pcmcia.cdl: Fix doc link.
+
2002-04-12 Gary Thomas <gthomas at redhat dot com>
* include/pcmcia.h: Add prototype(s) to remove warnings.
2000-09-17 Gary Thomas <gthomas at redhat dot com>
Index: packages/io/pcmcia/current/cdl/io_pcmcia.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/pcmcia/current/cdl/io_pcmcia.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 io_pcmcia.cdl
--- packages/io/pcmcia/current/cdl/io_pcmcia.cdl 23 May 2002 23:06:22 -0000 1.3
+++ packages/io/pcmcia/current/cdl/io_pcmcia.cdl 24 Feb 2003 06:46:48 -0000
@@ -53,11 +53,11 @@ cdl_package CYGPKG_IO_PCMCIA {
display "PCMCIA device drivers"
include_dir cyg/io
description "
This option enables drivers for basic I/O services on
pcmcia devices."
- doc redirect/ecos-device-drivers.html
+ doc ref/io.html
compile pcmcia.c
define_proc {
puts $::cdl_header "#include <pkgconf/system.h>"
Index: packages/io/serial/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/serial/current/ChangeLog,v
retrieving revision 1.48
diff -u -5 -p -r1.48 ChangeLog
--- packages/io/serial/current/ChangeLog 14 Feb 2003 11:50:11 -0000 1.48
+++ packages/io/serial/current/ChangeLog 24 Feb 2003 06:46:49 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/io_serial.cdl: Fix doc link.
+
2003-02-14 Jonathan Larmour <jifl at eCosCentric dot com>
* src/common/termiostty.c: Support VMIN > 0 properly.
2002-12-10 Gary Thomas <gthomas at ecoscentric dot com>
Index: packages/io/serial/current/cdl/io_serial.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/serial/current/cdl/io_serial.cdl,v
retrieving revision 1.9
diff -u -5 -p -r1.9 io_serial.cdl
--- packages/io/serial/current/cdl/io_serial.cdl 23 May 2002 23:06:24 -0000 1.9
+++ packages/io/serial/current/cdl/io_serial.cdl 24 Feb 2003 06:46:50 -0000
@@ -55,11 +55,11 @@ cdl_package CYGPKG_IO_SERIAL {
requires CYGPKG_ERROR
include_dir cyg/io
description "
This option enables drivers for basic I/O services on
serial devices."
- doc redirect/ecos-device-drivers.html
+ doc ref/io.html
compile -library=libextras.a common/serial.c
define_proc {
puts $::cdl_header "/***** proc output start *****/"
Index: packages/io/usb/eth/slave/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/usb/eth/slave/current/ChangeLog,v
retrieving revision 1.8
diff -u -5 -p -r1.8 ChangeLog
--- packages/io/usb/eth/slave/current/ChangeLog 7 Aug 2002 19:19:11 -0000 1.8
+++ packages/io/usb/eth/slave/current/ChangeLog 24 Feb 2003 06:46:50 -0000
@@ -1,5 +1,12 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/usbs_eth.cdl: Fix doc link.
+
+ * doc/usbseth.sgml: Comment out DOCTYPE for now to allow building
+ with standard doc build.
+
2002-07-26 David Smith <dsmith at redhat dot com>
* host/ecos_usbeth.c (ecos_usbeth_probe):
Two changes to the code that checks to see if this is the correct
driver for the USB peripheral that was just loaded. Fixed a bug
Index: packages/io/usb/eth/slave/current/cdl/usbs_eth.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/usb/eth/slave/current/cdl/usbs_eth.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 usbs_eth.cdl
--- packages/io/usb/eth/slave/current/cdl/usbs_eth.cdl 23 May 2002 23:06:31 -0000 1.4
+++ packages/io/usb/eth/slave/current/cdl/usbs_eth.cdl 24 Feb 2003 06:46:50 -0000
@@ -54,11 +54,11 @@ cdl_package CYGPKG_IO_USB_SLAVE_ETH {
parent CYGPKG_IO_USB_SLAVE
requires { CYGHWR_IO_USB_SLAVE_OUT_ENDPOINTS >= 1 }
requires { CYGHWR_IO_USB_SLAVE_IN_ENDPOINTS >= 1 }
compile usbseth.c
implements CYGINT_IO_USB_SLAVE_CLIENTS
- doc io-usb-slave-eth.html
+ doc ref/io-usb-slave-eth.html
description "
The USB slave ethernet package supports the development
of USB peripherals which provide an ethernet service to
the host machine. Such a peripheral could be a simple
Index: packages/io/usb/eth/slave/current/doc/usbseth.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/usb/eth/slave/current/doc/usbseth.sgml,v
retrieving revision 1.5
diff -u -5 -p -r1.5 usbseth.sgml
--- packages/io/usb/eth/slave/current/doc/usbseth.sgml 15 Sep 2002 22:11:46 -0000 1.5
+++ packages/io/usb/eth/slave/current/doc/usbseth.sgml 24 Feb 2003 06:46:51 -0000
@@ -1,6 +1,6 @@
-<!DOCTYPE reference PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!-- DOCTYPE reference PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
Index: packages/io/usb/slave/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/usb/slave/current/ChangeLog,v
retrieving revision 1.9
diff -u -5 -p -r1.9 ChangeLog
--- packages/io/usb/slave/current/ChangeLog 12 Feb 2003 17:23:12 -0000 1.9
+++ packages/io/usb/slave/current/ChangeLog 24 Feb 2003 06:46:51 -0000
@@ -1,5 +1,12 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/usbs.cdl: Update doc links.
+
+ * doc/usbs.sgml: Comment out DOCTYPE for now to allow building
+ with standard doc build.
+
2003-02-12 Bart Veer <bartv at ecoscentric dot com>
* host/Makefile.in, host/configure:
Regenerate after toplevel acinclude.m4 update
Index: packages/io/usb/slave/current/cdl/usbs.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/usb/slave/current/cdl/usbs.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 usbs.cdl
--- packages/io/usb/slave/current/cdl/usbs.cdl 23 May 2002 23:06:34 -0000 1.3
+++ packages/io/usb/slave/current/cdl/usbs.cdl 24 Feb 2003 06:46:51 -0000
@@ -52,11 +52,11 @@
cdl_package CYGPKG_IO_USB_SLAVE {
display "USB slave-side support"
parent CYGPKG_IO_USB
include_dir "cyg/io/usb"
active_if CYGHWR_IO_USB_SLAVE
- doc io-usb-slave.html
+ doc ref/io-usb-slave.html
compile usbs.c
cdl_interface CYGINT_IO_USB_SLAVE_CLIENTS {
display "Number of clients of USB devices"
@@ -104,11 +104,11 @@ cdl_package CYGPKG_IO_USB_SLAVE {
display "Number of available slave->host endpoints"
}
cdl_option CYGBLD_IO_USB_SLAVE_USBTEST {
display "Build the main USB test program"
- doc usbs-testing.html
+ doc ref/usbs-testing.html
description "
The USB slave-side software is supplied with host-side
and target-side software that allows a variety of testing
to be performed. The slave-side software is not built
by default since it can only operate in specific environments
Index: packages/io/usb/slave/current/doc/usbs.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/io/usb/slave/current/doc/usbs.sgml,v
retrieving revision 1.5
diff -u -5 -p -r1.5 usbs.sgml
--- packages/io/usb/slave/current/doc/usbs.sgml 15 Sep 2002 22:12:11 -0000 1.5
+++ packages/io/usb/slave/current/doc/usbs.sgml 24 Feb 2003 06:46:54 -0000
@@ -1,6 +1,6 @@
-<!DOCTYPE reference PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!-- DOCTYPE reference PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
Index: packages/kernel/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/kernel/current/ChangeLog,v
retrieving revision 1.95
diff -u -5 -p -r1.95 ChangeLog
--- packages/kernel/current/ChangeLog 19 Feb 2003 19:14:48 -0000 1.95
+++ packages/kernel/current/ChangeLog 24 Feb 2003 06:46:57 -0000
@@ -1,5 +1,11 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/kernel.cdl: Update doc links.
+ * cdl/synch.cdl: Ditto.
+ * cdl/thread.cdl: Ditto.
+
2003-02-19 Nick Garnett <nickg at calivar dot com>
* tests/fptest.c: Changed to run for a constant time rather than a
constant number of iterations, with a shorter run time for
simulated targets.
Index: packages/kernel/current/cdl/counters.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/kernel/current/cdl/counters.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 counters.cdl
--- packages/kernel/current/cdl/counters.cdl 23 May 2002 23:06:44 -0000 1.5
+++ packages/kernel/current/cdl/counters.cdl 24 Feb 2003 06:46:57 -0000
@@ -246,5 +246,6 @@ cdl_option CYGNUM_KERNEL_COUNTERS_RTC_PE
setting the system clock hardware. For more information, see the
option to override default clock settings
(CYGPKG_KERNEL_COUNTERS_CLOCK_OVERRIDE) and associated options."
}
+# EOF counters.cdl
Index: packages/kernel/current/cdl/kernel.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/kernel/current/cdl/kernel.cdl,v
retrieving revision 1.17
diff -u -5 -p -r1.17 kernel.cdl
--- packages/kernel/current/cdl/kernel.cdl 31 Jan 2003 11:44:03 -0000 1.17
+++ packages/kernel/current/cdl/kernel.cdl 24 Feb 2003 06:46:57 -0000
@@ -49,11 +49,11 @@
#
# ====================================================================
cdl_package CYGPKG_KERNEL {
display "eCos kernel"
- doc redirect/ecos-kernel-overview.html
+ doc ref/kernel.html
include_dir cyg/kernel
description "
This package contains the core functionality of the eCos
kernel. It relies on functionality provided by various HAL
packages and by the eCos infrastructure. In turn the eCos
@@ -75,11 +75,11 @@ cdl_package CYGPKG_KERNEL {
# The first component within the kernel is related to interrupt
# handling.
cdl_component CYGPKG_KERNEL_INTERRUPTS {
display "Kernel interrupt handling"
flavor none
- doc redirect/interrupts.html
+ doc ref/kernel-interrupts.html
description "
The majority of configuration options related to interrupt
handling are in the HAL packages, since usually the code has
to be platform-specific. There are a number of options
provided within the kernel related to slightly higher-level
@@ -96,11 +96,11 @@ cdl_package CYGPKG_KERNEL {
# between the HAL and kernel becomes blurred.
cdl_component CYGPKG_KERNEL_EXCEPTIONS {
display "Exception handling"
requires CYGPKG_HAL_EXCEPTIONS
default_value 1
- doc redirect/exceptions.html
+ doc ref/kernel-exceptions.html
description "
In the context of the eCos kernel exceptions are unexpected
events detected by the hardware, for example an attempt to
execute an illegal instruction. There is no relation with
other forms of exception, for example the catch and throw
@@ -139,11 +139,11 @@ cdl_package CYGPKG_KERNEL {
# ---------------------------------------------------------------------
cdl_component CYGPKG_KERNEL_SCHED {
display "Kernel schedulers"
flavor none
- doc redirect/the-scheduler.html
+ doc ref/kernel-overview.html#KERNEL-OVERVIEW-SCHEDULERS
description "
The eCos kernel provides a choice of schedulers. In addition
there are a number of configuration options to control the
detailed behaviour of these schedulers."
@@ -162,11 +162,11 @@ cdl_package CYGPKG_KERNEL {
# ---------------------------------------------------------------------
cdl_component CYGPKG_KERNEL_COUNTERS {
display "Counters and clocks"
flavor none
- doc redirect/counters-clocks-and-alarms.html
+ doc ref/kernel-counters.html
description "
The counter objects provided by the kernel provide an
abstraction of the clock facility that is generally provided.
Application code can associate alarms with counters, where an
alarm is identified by the number of ticks until it triggers,
@@ -178,11 +178,10 @@ cdl_package CYGPKG_KERNEL {
# ---------------------------------------------------------------------
cdl_component CYGPKG_KERNEL_THREADS {
display "Thread-related options"
flavor none
- doc redirect/thread-operations.html
description "
There are a number of configuration options related to the
implementation of threads, for example whether or not the
eCos kernel supports per-thread data."
@@ -191,11 +190,10 @@ cdl_package CYGPKG_KERNEL {
# ---------------------------------------------------------------------
cdl_component CYGPKG_KERNEL_SYNCH {
display "Synchronization primitives"
flavor none
- doc redirect/thread-synchronization.html
description "
The eCos kernel supports a number of different
synchronization primitives such as mutexes, semaphores,
condition variables, and message boxes. There are
configuration options to control the exact behaviour of some
@@ -247,11 +245,10 @@ cdl_package CYGPKG_KERNEL {
# Kernel API's. The C++ one is the default. A C API is optional.
# Support for other languages is possible.
cdl_component CYGPKG_KERNEL_API {
display "Kernel APIs"
flavor none
- doc redirect/kernel-apis.html
description "
The eCos kernel is implemented in C++, so a C++ interface
to the kernel is always available. There is also an optional
C API. Additional API's may be provided in future versions."
@@ -334,5 +331,7 @@ cdl_package CYGPKG_KERNEL {
description "
This option specifies the set of tests for the eCos kernel."
}
}
}
+
+# EOF kernel.cdl
Index: packages/kernel/current/cdl/scheduler.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/kernel/current/cdl/scheduler.cdl,v
retrieving revision 1.7
diff -u -5 -p -r1.7 scheduler.cdl
--- packages/kernel/current/cdl/scheduler.cdl 23 May 2002 23:06:45 -0000 1.7
+++ packages/kernel/current/cdl/scheduler.cdl 24 Feb 2003 06:46:57 -0000
@@ -251,5 +251,6 @@ cdl_component CYGSEM_KERNEL_SCHED_ASR_SU
it may be useful to pass per-thread data to a shared ASR
function."
}
}
+# EOF scheduler.cdl
Index: packages/kernel/current/cdl/synch.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/kernel/current/cdl/synch.cdl,v
retrieving revision 1.7
diff -u -5 -p -r1.7 synch.cdl
--- packages/kernel/current/cdl/synch.cdl 23 May 2002 23:06:45 -0000 1.7
+++ packages/kernel/current/cdl/synch.cdl 24 Feb 2003 06:46:58 -0000
@@ -51,10 +51,11 @@
cdl_component CYGSEM_KERNEL_SYNCH_MUTEX_PRIORITY_INVERSION_PROTOCOL {
display "Priority inversion protection protocols"
flavor booldata
+ doc ref/kernel-mutexes.html
legal_values { "SIMPLE" }
default_value { "SIMPLE" }
active_if { CYGSEM_KERNEL_SCHED_MLQUEUE }
requires { CYGINT_KERNEL_SCHEDULER_UNIQUE_PRIORITIES == 0 }
description "
@@ -140,10 +141,11 @@ cdl_component CYGSEM_KERNEL_SYNCH_MUTEX_
}
cdl_option CYGMFN_KERNEL_SYNCH_MBOXT_PUT_CAN_WAIT {
display "Message box blocking put support"
+ doc ref/kernel-mail-boxes.html
default_value 1
description "
Message boxes can support three different versions of the
put-message operation. The first is tryput(), which will fail
if the message box is already full. The other two are the
@@ -159,10 +161,11 @@ cdl_option CYGMFN_KERNEL_SYNCH_MBOXT_PUT
if thread timers are enabled."
}
cdl_option CYGNUM_KERNEL_SYNCH_MBOX_QUEUE_SIZE {
display "Message box queue size"
+ doc ref/kernel-mail-boxes.html
flavor data
legal_values 1 to 65535
default_value 10
description "
This configuration option controls the number of messages
@@ -172,19 +175,21 @@ cdl_option CYGNUM_KERNEL_SYNCH_MBOX_QUEU
each possible message."
}
cdl_option CYGMFN_KERNEL_SYNCH_CONDVAR_TIMED_WAIT {
display "Condition variable timed-wait support"
+ doc ref/kernel-condition-variables.html
requires CYGFUN_KERNEL_THREADS_TIMER
default_value 1
description "
This option enables the condition variable timed wait
facility."
}
cdl_option CYGMFN_KERNEL_SYNCH_CONDVAR_WAIT_MUTEX {
display "Condition variable explicit mutex wait support"
+ doc ref/kernel-condition-variables.html
default_value 1
description "
This option enables the condition variable explicit mutex wait
facility. By default condition variables in eCos are created with
a statically associated mutex. This option permits wait (and timed wait
@@ -202,5 +207,7 @@ cdl_option CYGIMP_KERNEL_SYNCH_MQUEUE_NO
adversely affect code size in application that make lots of mqueue
calls from different places, so enabling this option provides
non-inline versions to be used instead."
compile sync/mqueue.cxx
}
+
+# EOF synch.cdl
Index: packages/kernel/current/cdl/thread.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/kernel/current/cdl/thread.cdl,v
retrieving revision 1.10
diff -u -5 -p -r1.10 thread.cdl
--- packages/kernel/current/cdl/thread.cdl 30 Jan 2003 07:02:53 -0000 1.10
+++ packages/kernel/current/cdl/thread.cdl 24 Feb 2003 06:46:58 -0000
@@ -152,10 +152,11 @@ cdl_component CYGFUN_KERNEL_THREADS_STAC
}
cdl_component CYGVAR_KERNEL_THREADS_DATA {
display "Support for per-thread data"
requires CYGFUN_KERNEL_THREADS_STACK_LIMIT
+ doc ref/kernel-thread-data.html
default_value 1
description "
It is possible for the kernel to support per-thread data, in
other words an area of memory specific to each thread which
can be used to store data for that thread. This per-thread
@@ -231,10 +232,11 @@ cdl_component CYGVAR_KERNEL_THREADS_DATA
}
}
cdl_component CYGPKG_KERNEL_THREADS_DESTRUCTORS {
display "Thread destructors"
+ doc ref/kernel-thread-destructors.html
default_value 0
description "
This option enables support for registered destructor functions to
be called on thread exit."
@@ -289,11 +291,11 @@ cdl_option CYGNUM_KERNEL_MAX_SUSPEND_COU
flavor data
default_value 500
description "
This option provides for an assertion that the count value for
counted thread suspends do not exceed set limits. This is to help
- with debugging, to allow a runaaway loop, for example, to be
+ with debugging, to allow a runaway loop, for example, to be
detected more easily.
If the option is not defined, no assert is included. Whether asserts
are themselves included depends on infrastructure configury in
infra.h"
@@ -325,5 +327,6 @@ cdl_option CYGIMP_IDLE_THREAD_YIELD {
description "
If the scheduler configuration only has a single priority
level, then the idle thread must yield each time around its loop."
}
+# EOF thread.cdl
Index: packages/language/c/libc/common/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/common/current/ChangeLog,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ChangeLog
--- packages/language/c/libc/common/current/ChangeLog 23 May 2002 23:07:03 -0000 1.3
+++ packages/language/c/libc/common/current/ChangeLog 24 Feb 2003 06:46:59 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/libc.cdl: Fix doc link.
+
2000-05-02 Jonathan Larmour <jlarmour at redhat dot co dot uk>
* New package
Separated original libc out into separate packages on functional
boundaries.
Index: packages/language/c/libc/common/current/cdl/libc.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/common/current/cdl/libc.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 libc.cdl
--- packages/language/c/libc/common/current/cdl/libc.cdl 23 May 2002 23:07:04 -0000 1.3
+++ packages/language/c/libc/common/current/cdl/libc.cdl 24 Feb 2003 06:46:59 -0000
@@ -54,10 +54,10 @@ cdl_package CYGPKG_LIBC {
The packages under this package enable compatibility with the ISO C
standard - ISO/IEC 9899:1990. This allows the user application to use
well known standard C library functions, and in eCos starts a thread
to invoke the user function main(). This package is a top-level placeholder
to contain the implementations."
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
}
# ====================================================================
# EOF libc.cdl
Index: packages/language/c/libc/i18n/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/i18n/current/ChangeLog,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ChangeLog
--- packages/language/c/libc/i18n/current/ChangeLog 23 May 2002 23:07:04 -0000 1.5
+++ packages/language/c/libc/i18n/current/ChangeLog 24 Feb 2003 06:46:59 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/i18n.cdl: Fix doc link.
+
2001-06-28 Jesper Skov <jskov at redhat dot com>
* tests/i18nmb.c: fix warning.
2001-06-08 Jonathan Larmour <jlarmour at redhat dot com>
Index: packages/language/c/libc/i18n/current/cdl/i18n.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/i18n/current/cdl/i18n.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 i18n.cdl
--- packages/language/c/libc/i18n/current/cdl/i18n.cdl 23 May 2002 23:07:05 -0000 1.4
+++ packages/language/c/libc/i18n/current/cdl/i18n.cdl 24 Feb 2003 06:46:59 -0000
@@ -52,11 +52,11 @@ cdl_package CYGPKG_LIBC_I18N {
display "ISO C library internationalization functions"
description "
This package provides internationalization functions specified by the
ISO C standard - ISO/IEC 9899:1990. These include locale-related
functionality and <ctype.h> functionality."
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
include_dir cyg/libc/i18n
parent CYGPKG_LIBC
implements CYGINT_ISO_LOCALE
implements CYGINT_ISO_CTYPE
implements CYGINT_ISO_STDLIB_MULTIBYTE
Index: packages/language/c/libc/setjmp/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/setjmp/current/ChangeLog,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ChangeLog
--- packages/language/c/libc/setjmp/current/ChangeLog 23 May 2002 23:07:07 -0000 1.3
+++ packages/language/c/libc/setjmp/current/ChangeLog 24 Feb 2003 06:46:59 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/setjmp.cdl: Fix doc link.
+
2002-04-09 Jonathan Larmour <jlarmour at redhat dot com>
* include/setjmp.h: Use NORET attributes from cyg_type.h.
2000-05-16 Nick Garnett <nickg at cygnus dot co dot uk>
Index: packages/language/c/libc/setjmp/current/cdl/setjmp.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/setjmp/current/cdl/setjmp.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 setjmp.cdl
--- packages/language/c/libc/setjmp/current/cdl/setjmp.cdl 23 May 2002 23:07:08 -0000 1.3
+++ packages/language/c/libc/setjmp/current/cdl/setjmp.cdl 24 Feb 2003 06:46:59 -0000
@@ -52,11 +52,11 @@ cdl_package CYGPKG_LIBC_SETJMP {
display "ISO C library setjmp/longjmp functions"
description "
This package provides non-local jumps based on setjmp() and
longjmp() in <setjmp.h> as specified by the ISO C
standard - ISO/IEC 9899:1990."
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
include_dir cyg/libc/setjmp
parent CYGPKG_LIBC
requires CYGPKG_ISOINFRA
implements CYGINT_ISO_SETJMP
requires { CYGBLD_ISO_SETJMP_HEADER == "<cyg/libc/setjmp/setjmp.h>" }
Index: packages/language/c/libc/signals/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/signals/current/ChangeLog,v
retrieving revision 1.7
diff -u -5 -p -r1.7 ChangeLog
--- packages/language/c/libc/signals/current/ChangeLog 13 Feb 2003 00:03:00 -0000 1.7
+++ packages/language/c/libc/signals/current/ChangeLog 24 Feb 2003 06:46:59 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/signals.cdl: Fix doc link.
+
2003-02-13 Jonathan Larmour <jifl at eCosCentric dot com>
* include/signal.inl (raise): Use if/else rather than switch to
avoid GCC 3.2 bug.
Index: packages/language/c/libc/signals/current/cdl/signals.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/signals/current/cdl/signals.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 signals.cdl
--- packages/language/c/libc/signals/current/cdl/signals.cdl 23 May 2002 23:07:09 -0000 1.4
+++ packages/language/c/libc/signals/current/cdl/signals.cdl 24 Feb 2003 06:46:59 -0000
@@ -55,11 +55,11 @@ cdl_package CYGPKG_LIBC_SIGNALS {
as implemented in ISO/IEC 9899:1990 chapter 7.7 with
the signal() and raise() functions. As well as
allowing a program to send itself signals, it is
also possible to cause hardware exceptions to
be signalled to the program in a similar way."
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
include_dir cyg/libc/signals
parent CYGPKG_LIBC
implements CYGINT_ISO_SIGNAL_NUMBERS
implements CYGINT_ISO_SIGNAL_IMPL
requires { CYGBLD_ISO_SIGNAL_NUMBERS_HEADER == \
Index: packages/language/c/libc/startup/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/startup/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/language/c/libc/startup/current/ChangeLog 23 May 2002 23:07:10 -0000 1.6
+++ packages/language/c/libc/startup/current/ChangeLog 24 Feb 2003 06:46:59 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/startup.cdl: Fix doc link.
+
2002-04-09 Jonathan Larmour <jlarmour at redhat dot com>
* src/_exit.cxx (_exit): Assert on non-zero error.
2001-10-09 Jonathan Larmour <jlarmour at redhat dot com>
Index: packages/language/c/libc/startup/current/cdl/startup.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/startup/current/cdl/startup.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 startup.cdl
--- packages/language/c/libc/startup/current/cdl/startup.cdl 23 May 2002 23:07:11 -0000 1.5
+++ packages/language/c/libc/startup/current/cdl/startup.cdl 24 Feb 2003 06:46:59 -0000
@@ -58,11 +58,11 @@ cdl_package CYGPKG_LIBC_STARTUP {
supplied with arguments and an environment
(as retrievable by the getenv() function).
It also includes at the other end of things,
what happens when main() returns or exit() is
called."
- doc redirect/c-library-startup.html
+ doc ref/c-library-startup.html
include_dir cyg/libc/startup
parent CYGPKG_LIBC
requires CYGPKG_ISOINFRA
requires { CYGINT_LIBC_STARTUP_CONTEXT == 1 }
implements CYGINT_ISO_EXIT
Index: packages/language/c/libc/stdio/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/stdio/current/ChangeLog,v
retrieving revision 1.19
diff -u -5 -p -r1.19 ChangeLog
--- packages/language/c/libc/stdio/current/ChangeLog 15 Feb 2003 16:57:03 -0000 1.19
+++ packages/language/c/libc/stdio/current/ChangeLog 24 Feb 2003 06:46:59 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/stdio.cdl: Fix doc link.
+
2003-02-15 Fabrice Gautier <Fabrice_Gautier at sdesigns dot com>
* include/stdio.inl (setbuf): Don't supply size with _IONBF.
* src/common/stdioinlines.cxx (setbuf): Ditto.
Index: packages/language/c/libc/stdio/current/cdl/stdio.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/stdio/current/cdl/stdio.cdl,v
retrieving revision 1.8
diff -u -5 -p -r1.8 stdio.cdl
--- packages/language/c/libc/stdio/current/cdl/stdio.cdl 23 May 2002 23:07:13 -0000 1.8
+++ packages/language/c/libc/stdio/current/cdl/stdio.cdl 24 Feb 2003 06:46:59 -0000
@@ -52,11 +52,11 @@ cdl_package CYGPKG_LIBC_STDIO {
display "ISO C library standard input/output functions"
description "
This package provides standard input/output functions associated
with the header file <stdio.h> as specified by the
ISO C standard - ISO/IEC 9899:1990."
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
include_dir cyg/libc/stdio
parent CYGPKG_LIBC
requires CYGPKG_IO
requires CYGPKG_IO_SERIAL_HALDIAG
requires CYGPKG_LIBC_I18N
@@ -340,10 +340,11 @@ cdl_package CYGPKG_LIBC_STDIO {
}
}
cdl_option CYGSEM_LIBC_STDIO_THREAD_SAFE_STREAMS {
display "Thread safe I/O streams"
+ doc ref/libc-thread-safety.html
requires CYGPKG_KERNEL
default_value { 0 != CYGPKG_KERNEL }
description "
This option controls whether standard I/O streams
are thread-safe. Having this option set allows
Index: packages/language/c/libc/stdlib/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/stdlib/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/language/c/libc/stdlib/current/ChangeLog 23 May 2002 23:07:20 -0000 1.6
+++ packages/language/c/libc/stdlib/current/ChangeLog 24 Feb 2003 06:46:59 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/stdlib.cdl: Fix doc link.
+
2001-06-28 Jesper Skov <jskov at redhat dot com>
* tests/atoi.c (main): Fix warning.
2001-06-18 Jonathan Larmour <jlarmour at redhat dot com>
Index: packages/language/c/libc/stdlib/current/cdl/stdlib.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/stdlib/current/cdl/stdlib.cdl,v
retrieving revision 1.4
diff -u -5 -p -r1.4 stdlib.cdl
--- packages/language/c/libc/stdlib/current/cdl/stdlib.cdl 23 May 2002 23:07:20 -0000 1.4
+++ packages/language/c/libc/stdlib/current/cdl/stdlib.cdl 24 Feb 2003 06:46:59 -0000
@@ -51,11 +51,11 @@
cdl_package CYGPKG_LIBC_STDLIB {
display "ISO C library general utility functions"
description "
This package provides general utility functions in <stdlib.h>
as specified by the ISO C standard - ISO/IEC 9899:1990."
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
include_dir cyg/libc/stdlib
parent CYGPKG_LIBC
requires CYGPKG_ISOINFRA
implements CYGINT_ISO_STDLIB_STRCONV
implements CYGINT_ISO_STDLIB_ENVIRON
@@ -118,10 +118,11 @@ cdl_package CYGPKG_LIBC_STDLIB {
These options control the behaviour of the
functions rand(), srand() and rand_r()"
cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
display "Per-thread random seed"
+ doc ref/libc-thread-safety.html
requires CYGVAR_KERNEL_THREADS_DATA
default_value 0
description "
This option controls whether the pseudo-random
number generation functions rand() and srand()
Index: packages/language/c/libc/string/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/string/current/ChangeLog,v
retrieving revision 1.6
diff -u -5 -p -r1.6 ChangeLog
--- packages/language/c/libc/string/current/ChangeLog 23 May 2002 23:07:23 -0000 1.6
+++ packages/language/c/libc/string/current/ChangeLog 24 Feb 2003 06:46:59 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/string.cdl: Fix doc link.
+
2001-11-27 Jonathan Larmour <jlarmour at redhat dot com>
* cdl/string.cdl (CYGFUN_LIBC_STRING_BSD_FUNCS): New option to indicate
provision of BSD-ish string functions.
* include/bsdstring.h: New header to export BSD string func prototypes.
Index: packages/language/c/libc/string/current/cdl/string.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/string/current/cdl/string.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 string.cdl
--- packages/language/c/libc/string/current/cdl/string.cdl 23 May 2002 23:07:23 -0000 1.5
+++ packages/language/c/libc/string/current/cdl/string.cdl 24 Feb 2003 06:46:59 -0000
@@ -51,11 +51,11 @@
cdl_package CYGPKG_LIBC_STRING {
display "ISO C library string functions"
description "
This package provides string functions specified by the
ISO C standard - ISO/IEC 9899:1990."
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
include_dir cyg/libc/string
parent CYGPKG_LIBC
implements CYGINT_ISO_STRTOK_R
implements CYGINT_ISO_STRING_LOCALE_FUNCS
implements CYGINT_ISO_STRING_MEMFUNCS
Index: packages/language/c/libc/time/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/time/current/ChangeLog,v
retrieving revision 1.12
diff -u -5 -p -r1.12 ChangeLog
--- packages/language/c/libc/time/current/ChangeLog 28 Jan 2003 00:43:53 -0000 1.12
+++ packages/language/c/libc/time/current/ChangeLog 24 Feb 2003 06:47:00 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/time.cdl: Fix doc link.
+
2003-01-28 Jonathan Larmour <jifl at eCosCentric dot com>
* cdl/time.cdl: Correct reference to
CYGSEM_LIBC_TIME_POSIX_TIME_ROUTINES in CYGPKG_LIBC_TIME_TESTS to
CYGFUN_LIBC_TIME_POSIX.
Index: packages/language/c/libc/time/current/cdl/time.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libc/time/current/cdl/time.cdl,v
retrieving revision 1.7
diff -u -5 -p -r1.7 time.cdl
--- packages/language/c/libc/time/current/cdl/time.cdl 28 Jan 2003 00:43:53 -0000 1.7
+++ packages/language/c/libc/time/current/cdl/time.cdl 24 Feb 2003 06:47:00 -0000
@@ -51,11 +51,11 @@
cdl_package CYGPKG_LIBC_TIME {
display "ISO C library date and time functions"
description "
This package provides time functions specified by the
ISO C standard - ISO/IEC 9899:1990."
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
include_dir cyg/libc/time
parent CYGPKG_LIBC
implements CYGINT_ISO_C_TIME_TYPES
implements CYGINT_ISO_C_CLOCK_FUNCS
requires { CYGBLD_ISO_C_TIME_TYPES_HEADER == "<cyg/libc/time/time.h>" }
Index: packages/language/c/libm/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libm/current/ChangeLog,v
retrieving revision 1.23
diff -u -5 -p -r1.23 ChangeLog
--- packages/language/c/libm/current/ChangeLog 23 May 2002 23:07:38 -0000 1.23
+++ packages/language/c/libm/current/ChangeLog 24 Feb 2003 06:47:01 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/libm.cdl: Fix doc link.
+
2001-09-28 Jesper Skov <jskov at redhat dot com>
* src/double/portable-api/s_expm1.c (expm1): Init c before it's used.
2001-07-20 Jonathan Larmour <jlarmour at redhat dot com>
Index: packages/language/c/libm/current/cdl/libm.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/language/c/libm/current/cdl/libm.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 libm.cdl
--- packages/language/c/libm/current/cdl/libm.cdl 23 May 2002 23:07:39 -0000 1.5
+++ packages/language/c/libm/current/cdl/libm.cdl 24 Feb 2003 06:47:01 -0000
@@ -49,11 +49,11 @@
#
# ====================================================================
cdl_package CYGPKG_LIBM {
display "Math library"
- doc redirect/the-iso-standard-c-and-math-libraries.html
+ doc ref/libc.html
description "
ISO standard floating point mathematical library
containing many useful functions for mathematical
calculations."
Index: packages/net/bsd_tcpip/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/bsd_tcpip/current/ChangeLog,v
retrieving revision 1.16
diff -u -5 -p -r1.16 ChangeLog
--- packages/net/bsd_tcpip/current/ChangeLog 18 Feb 2003 17:32:02 -0000 1.16
+++ packages/net/bsd_tcpip/current/ChangeLog 24 Feb 2003 06:47:01 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/freebsd_net.cdl: Fix doc link.
+
2003-02-18 Jonathan Larmour <jifl at eCosCentric dot com>
* cdl/freebsd_net.cdl: Remove unused NBPFILTER and BRIDGE CDL options.
2003-02-14 Jonathan Larmour <jifl at eCosCentric dot com>
Index: packages/net/bsd_tcpip/current/cdl/freebsd_net.cdl
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/bsd_tcpip/current/cdl/freebsd_net.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 freebsd_net.cdl
--- packages/net/bsd_tcpip/current/cdl/freebsd_net.cdl 18 Feb 2003 17:32:02 -0000 1.2
+++ packages/net/bsd_tcpip/current/cdl/freebsd_net.cdl 24 Feb 2003 06:47:01 -0000
@@ -27,11 +27,11 @@
# ====================================================================
cdl_package CYGPKG_NET_FREEBSD_STACK {
display "FreeBSD networking stack"
parent CYGPKG_NET
- doc doc/index.html
+ doc ref/tcpip-freebsd.html
include_dir .
requires CYGPKG_IO
requires CYGPKG_ISOINFRA
requires CYGINT_ISO_C_TIME_TYPES
requires CYGINT_ISO_STRERROR
Index: packages/net/common/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/common/current/ChangeLog,v
retrieving revision 1.19
diff -u -5 -p -r1.19 ChangeLog
--- packages/net/common/current/ChangeLog 31 Jan 2003 12:35:07 -0000 1.19
+++ packages/net/common/current/ChangeLog 24 Feb 2003 06:47:02 -0000
@@ -1,5 +1,12 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/net.cdl: Improve doc links.
+
+ * doc/prepare-manpages.sh: Generate namespaced IDs, without shouting.
+ * doc/tcpip-manpages.sgml: Regenerated.
+
2003-01-31 Jonathan Larmour <jifl at eCosCentric dot com>
* cdl/net.cdl (CYGPKG_NET_BUILD_HW_TESTS): Requires eth hardware
devices.
(CYGPKG_NET_TESTS): Remove from under CYGPKG_NET_BUILD_TESTS (which
Index: packages/net/common/current/cdl/net.cdl
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/common/current/cdl/net.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 net.cdl
--- packages/net/common/current/cdl/net.cdl 31 Jan 2003 12:35:07 -0000 1.2
+++ packages/net/common/current/cdl/net.cdl 24 Feb 2003 06:47:02 -0000
@@ -26,11 +26,11 @@
#
# ====================================================================
cdl_package CYGPKG_NET {
display "Basic networking framework"
- doc doc/index.html
+ doc ref/net-common-tcpip.html
include_dir .
requires CYGPKG_IO
requires CYGPKG_ISOINFRA
requires CYGINT_ISO_C_TIME_TYPES
requires CYGINT_ISO_STRERROR
Index: packages/net/common/current/doc/prepare-manpages.sh
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/common/current/doc/prepare-manpages.sh,v
retrieving revision 1.1
diff -u -5 -p -r1.1 prepare-manpages.sh
--- packages/net/common/current/doc/prepare-manpages.sh 20 May 2002 22:25:03 -0000 1.1
+++ packages/net/common/current/doc/prepare-manpages.sh 24 Feb 2003 06:47:02 -0000
@@ -24,15 +24,15 @@ echo >> tcpip-manpages.sgml
for manpage in $MANPAGE_LIST
do
echo "processing $manpage"
# get the title for this section
- manpage_title=`egrep '^\.Dt' $manpage | awk '{print $2}'`
+ manpage_title=`egrep '^\.Dt' $manpage | awk '{print $2}' | tr 'A-Z' 'a-z'`
# note that _ is illegal in an id, so we canonicalize it to -
docbook_section_id=`echo $manpage_title | sed 's/_/-/g'`
# now prepare out a section and title
- echo " <sect1 id=\"$docbook_section_id\">" >> tcpip-manpages.sgml
+ echo " <sect1 id=\"net-common-tcpip-manpages-$docbook_section_id\">" >> tcpip-manpages.sgml
echo " <title>$manpage_title</title>" >> tcpip-manpages.sgml
# we make it <screen> so that it is a monospaced font
echo " <screen>" >> tcpip-manpages.sgml
# now put the contents into this section
Index: packages/net/common/current/doc/tcpip-manpages.sgml
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/common/current/doc/tcpip-manpages.sgml,v
retrieving revision 1.1
diff -u -5 -p -r1.1 tcpip-manpages.sgml
--- packages/net/common/current/doc/tcpip-manpages.sgml 20 May 2002 22:25:03 -0000 1.1
+++ packages/net/common/current/doc/tcpip-manpages.sgml 24 Feb 2003 06:47:05 -0000
@@ -6,55 +6,53 @@
<chapter id="tcpip-library-reference">
<title>TCP/IP Library Reference</title>
- <sect1 id="GETDOMAINNAME">
- <title>GETDOMAINNAME</title>
+ <sect1 id="net-common-tcpip-manpages-getdomainname">
+ <title>getdomainname</title>
<screen>
-
-GETDOMAINNAME(3) System Programmer's Manual GETDOMAINNAME(3)
+GETDOMAINNAME(3) System Library Functions Manual GETDOMAINNAME(3)
NAME
getdomainname, setdomainname - get/set YP domain name of current host
SYNOPSIS
#include <unistd.h>
int
- getdomainname(char *name, size_t namelen)
+ getdomainname(char *name, size_t namelen);
int
- setdomainname(const char *name, size_t namelen)
+ setdomainname(const char *name, size_t namelen);
DESCRIPTION
The getdomainname() function returns the YP domain name for the current
processor, as previously set by setdomainname(). The parameter namelen
specifies the size of the name array. If insufficient space is provided,
the returned name is truncated. The returned name is always null termi-
nated.
setdomainname() sets the domain name of the host machine to be name,
- which has length namelen. This call is restricted to the superuser and is
- normally used only when the system is bootstrapped.
+ which has length namelen. This call is restricted to the superuser and
+ is normally used only when the system is bootstrapped.
RETURN VALUES
- If the call succeeds a value of 0 is returned. If the call fails, a val-
- ue of -1 is returned and an error code is placed in the global variable
- errno.
+ If the call succeeds a value of 0 is returned. If the call fails, a
+ value of -1 is returned and an error code is placed in the global vari-
+ able errno.
ERRORS
The following errors may be returned by these calls:
- [EFAULT] The name or namelen parameter gave an invalid address.
+ [EFAULT] The name or namelen parameter gave an invalid address.
- [EPERM] The caller tried to set the domain name and was not the su-
- peruser.
+ [EPERM] The caller tried to set the domain name and was not
+ the superuser.
SEE ALSO
- domainname(1), gethostid(3), gethostname(3), sysctl(3), sysctl(8),
- yp(8)
+ domainname(1), gethostid(3), gethostname(3), sysctl(3), sysctl(8), yp(8)
BUGS
Domain names are limited to MAXHOSTNAMELEN (from <sys/param.h>) charac-
ters, currently 256. This includes the terminating NUL character.
@@ -62,62 +60,61 @@ BUGS
systems may not guarantee termination with NUL.
HISTORY
The getdomainname function call appeared in SunOS 3.x.
-BSD Experimental May 6, 1994 1
+BSD May 6, 1994 BSD
</screen>
</sect1>
- <sect1 id="GETHOSTNAME">
- <title>GETHOSTNAME</title>
+ <sect1 id="net-common-tcpip-manpages-gethostname">
+ <title>gethostname</title>
<screen>
-
-GETHOSTNAME(3) System Programmer's Manual GETHOSTNAME(3)
+GETHOSTNAME(3) System Library Functions Manual GETHOSTNAME(3)
NAME
gethostname, sethostname - get/set name of current host
SYNOPSIS
#include <unistd.h>
int
- gethostname(char *name, size_t namelen)
+ gethostname(char *name, size_t namelen);
int
- sethostname(const char *name, size_t namelen)
+ sethostname(const char *name, size_t namelen);
DESCRIPTION
The gethostname() function returns the standard host name for the current
processor, as previously set by sethostname(). The parameter namelen
specifies the size of the name array. If insufficient space is provided,
the returned name is truncated. The returned name is always null termi-
nated.
sethostname() sets the name of the host machine to be name, which has
- length namelen. This call is restricted to the superuser and is normally
+ length namelen. This call is restricted to the superuser and is normally
used only when the system is bootstrapped.
RETURN VALUES
- If the call succeeds a value of 0 is returned. If the call fails, a val-
- ue of -1 is returned and an error code is placed in the global variable
- errno.
+ If the call succeeds a value of 0 is returned. If the call fails, a
+ value of -1 is returned and an error code is placed in the global vari-
+ able errno.
ERRORS
The following errors may be returned by these calls:
- [EFAULT] The name or namelen parameter gave an invalid address.
+ [EFAULT] The name or namelen parameter gave an invalid address.
- [EPERM] The caller tried to set the hostname and was not the supe-
- ruser.
+ [EPERM] The caller tried to set the hostname and was not the
+ superuser.
SEE ALSO
- hostname(1), getdomainname(3), gethostid(3), sysctl(3), sysctl(8),
- yp(8)
+ hostname(1), getdomainname(3), gethostid(3), sysctl(3), sysctl(8), yp(8)
STANDARDS
- The gethostname() function call conforms to .
+ The gethostname() function call conforms to X/Open Portability Guide
+ Issue 4.2 (``XPG4.2'').
HISTORY
The gethostname() function call appeared in 4.2BSD.
BUGS
@@ -125,19 +122,18 @@ BUGS
currently 256. This includes the terminating NUL character.
If the buffer passed to gethostname() is smaller than MAXHOSTNAMELEN,
other operating systems may not guarantee termination with NUL.
-BSD Experimental June 4, 1993 1
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="BYTEORDER">
- <title>BYTEORDER</title>
+ <sect1 id="net-common-tcpip-manpages-byteorder">
+ <title>byteorder</title>
<screen>
-
-BYTEORDER(3) System Programmer's Manual BYTEORDER(3)
+BYTEORDER(3) System Library Functions Manual BYTEORDER(3)
NAME
htonl, htons, ntohl, ntohs, htobe32, htobe16, betoh32, betoh16, htole32,
htole16, letoh32, letoh16, swap32, swap16 - convert values between dif-
ferent byte orderings
@@ -145,50 +141,50 @@ NAME
SYNOPSIS
#include <sys/types.h>
#include <machine/endian.h>
u_int32_t
- htonl(u_int32_t host32)
+ htonl(u_int32_t host32);
u_int16_t
- htons(u_int16_t host16)
+ htons(u_int16_t host16);
u_int32_t
- ntohl(u_int32_t net32)
+ ntohl(u_int32_t net32);
u_int16_t
- ntohs(u_int16_t net16)
+ ntohs(u_int16_t net16);
u_int32_t
- htobe32(u_int32_t host32)
+ htobe32(u_int32_t host32);
u_int16_t
- htobe16(u_int16_t host16)
+ htobe16(u_int16_t host16);
u_int32_t
- betoh32(u_int32_t big32)
+ betoh32(u_int32_t big32);
u_int16_t
- betoh16(u_int16_t big16)
+ betoh16(u_int16_t big16);
u_int32_t
- htole32(u_int32_t host32)
+ htole32(u_int32_t host32);
u_int16_t
- htole16(u_int16_t host16)
+ htole16(u_int16_t host16);
u_int32_t
- letoh32(u_int32_t little32)
+ letoh32(u_int32_t little32);
u_int16_t
- letoh16(u_int16_t little16)
+ letoh16(u_int16_t little16);
u_int32_t
- swap32(u_int32_t val32)
+ swap32(u_int32_t val32);
u_int16_t
- swap16(u_int16_t val16)
+ swap16(u_int16_t val16);
DESCRIPTION
These routines convert 16- and 32-bit quantities between different byte
orderings. The ``swap'' functions reverse the byte ordering of the given
quantity, the others converts either from/to the native byte order used
@@ -196,23 +192,24 @@ DESCRIPTION
Apart from the swap functions, the names can be described by this form:
{src-order}to{dst-order}{size}. Both {src-order} and {dst-order} can
take the following forms:
-
-
h Host order.
n Network order (big-endian).
be Big-endian (most significant byte first).
le Little-endian (least significant byte first).
- One of the specified orderings must be `h'. {size} will take these forms:
+ One of the specified orderings must be `h'. {size} will take these
+ forms:
- l Long (32-bit, used in conjunction with forms involving `n').
- s Short (16-bit, used in conjunction with forms involving `n').
- 16 16-bit.
- 32 32-bit.
+ l Long (32-bit, used in conjunction with forms involving `n').
+ s Short (16-bit, used in conjunction with forms involving `n').
+ 16
+ 16-bit.
+ 32
+ 32-bit.
The swap functions are of the form: swap{size}.
Names involving `n' convert quantities between network byte order and
host byte order. The last letter (`s' or `l') is a mnemonic for the tra-
@@ -221,60 +218,59 @@ DESCRIPTION
ditional misunderstanding. On machines which have a byte order which is
the same as the network order, routines are defined as null macros.
The functions involving either ``be'', ``le'', or ``swap'' use the num-
bers 16 and 32 for specifying the bitwidth of the quantities they operate
- on. Currently all supported architectures are either big- or little-en-
- dian so either the ``be'' or ``le'' variants are implemented as null
+ on. Currently all supported architectures are either big- or little-
+ endian so either the ``be'' or ``le'' variants are implemented as null
macros.
The routines mentioned above which have either {src-order} or {dst-order}
set to `n' are most often used in conjunction with Internet addresses and
ports as returned by gethostbyname(3) and getservent(3).
SEE ALSO
- gethostbyname(3), getservent(3)
+ gethostbyname(3), getservent(3)
HISTORY
The byteorder functions appeared in 4.2BSD.
BUGS
On the vax, alpha, i386, and so far mips, bytes are handled backwards
from most everyone else in the world. This is not expected to be fixed
in the near future.
-BSD Experimental June 4, 1993 2
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="ETHERS">
- <title>ETHERS</title>
+ <sect1 id="net-common-tcpip-manpages-ethers">
+ <title>ethers</title>
<screen>
-
-ETHERS(3) System Programmer's Manual ETHERS(3)
+ETHERS(3) System Library Functions Manual ETHERS(3)
NAME
ether_aton, ether_ntoa, ether_addr, ether_ntohost, ether_hostton,
ether_line - get ethers entry
SYNOPSIS
#include <netinet/if_ether.h>
char *
- ether_ntoa(struct ether_addr *e)
+ ether_ntoa(struct ether_addr *e);
struct ether_addr *
- ether_aton(char *s)
+ ether_aton(char *s);
int
- ether_ntohost(char *hostname, struct ether_addr *e)
+ ether_ntohost(char *hostname, struct ether_addr *e);
int
- ether_hostton(char *hostname, struct ether_addr *e)
+ ether_hostton(char *hostname, struct ether_addr *e);
int
- ether_line(char *l, struct ether_addr *e, char *hostname)
+ ether_line(char *l, struct ether_addr *e, char *hostname);
DESCRIPTION
Ethernet addresses are represented by the following structure:
struct ether_addr {
@@ -283,21 +279,21 @@ DESCRIPTION
The ether_ntoa() function converts this structure into an ASCII string of
the form ``xx:xx:xx:xx:xx:xx'', consisting of 6 hexadecimal numbers sepa-
rated by colons. It returns a pointer to a static buffer that is reused
for each call. The ether_aton() converts an ASCII string of the same
- form and to a structure containing the 6 octets of the address. It re-
- turns a pointer to a static structure that is reused for each call.
+ form and to a structure containing the 6 octets of the address. It
+ returns a pointer to a static structure that is reused for each call.
The ether_ntohost() and ether_hostton() functions interrogate the
- database mapping host names to Ethernet addresses, /etc/ethers. The
+ database mapping host names to Ethernet addresses, /etc/ethers. The
ether_ntohost() function looks up the given Ethernet address and writes
the associated host name into the character buffer passed. This buffer
should be MAXHOSTNAMELEN characters in size. The ether_hostton() func-
- tion looks up the given host name and writes the associated Ethernet ad-
- dress into the structure passed. Both functions return zero if they find
- the requested host name or address, and -1 if not.
+ tion looks up the given host name and writes the associated Ethernet
+ address into the structure passed. Both functions return zero if they
+ find the requested host name or address, and -1 if not.
Each call reads /etc/ethers from the beginning; if a `+' appears alone on
a line in the file, then ether_hostton() will consult the ethers.byname
YP map, and ether_ntohost() will consult the ethers.byaddr YP map.
@@ -313,26 +309,26 @@ FILES
SEE ALSO
ethers(5)
HISTORY
The ether_ntoa(), ether_aton(), ether_ntohost(), ether_hostton(), and
- ether_line() functions were adopted from SunOS and appeared in
+ ether_line() functions were adopted from SunOS and appeared in NetBSD 0.9
+ b.
BUGS
The data space used by these functions is static; if future use requires
the data, it should be copied before any subsequent calls to these func-
tions overwrite it.
-BSD Experimental December 16, 1993 2
+BSD December 16, 1993 BSD
</screen>
</sect1>
- <sect1 id="GETADDRINFO">
- <title>GETADDRINFO</title>
+ <sect1 id="net-common-tcpip-manpages-getaddrinfo">
+ <title>getaddrinfo</title>
<screen>
-
-GETADDRINFO(3) System Programmer's Manual GETADDRINFO(3)
+GETADDRINFO(3) System Library Functions Manual GETADDRINFO(3)
NAME
getaddrinfo, freeaddrinfo, gai_strerror - nodename-to-address translation
in protocol-independent manner
@@ -341,22 +337,23 @@ SYNOPSIS
#include <sys/socket.h>
#include <netdb.h>
int
getaddrinfo(const char *nodename, const char *servname,
- const struct addrinfo *hints, struct addrinfo **res)
+ const struct addrinfo *hints, struct addrinfo **res);
void
- freeaddrinfo(struct addrinfo *ai)
+ freeaddrinfo(struct addrinfo *ai);
char *
- gai_strerror(int ecode)
+ gai_strerror(int ecode);
DESCRIPTION
The getaddrinfo() function is defined for protocol-independent nodename-
- to-address translation. It performs the functionality of gethostby-
- name(3) and getservbyname(3), but in a more sophisticated manner.
+ to-address translation. It performs the functionality of
+ gethostbyname(3) and getservbyname(3), but in a more sophisticated man-
+ ner.
The addrinfo structure is defined as a result of including the <netdb.h>
header:
struct addrinfo { *
@@ -369,11 +366,11 @@ DESCRIPTION
struct sockaddr *ai_addr; /* binary address */
struct addrinfo *ai_next; /* next structure in linked list */
};
The nodename and servname arguments are pointers to NUL-terminated
- strings or NULL. One or both of these two arguments must be a non-null
+ strings or NULL. One or both of these two arguments must be a non-null
pointer. In the normal client scenario, both the nodename and servname
are specified. In the normal server scenario, only the servname is spec-
ified. A non-null nodename string can be either a node name or a numeric
host address string (i.e., a dotted-decimal IPv4 address or an IPv6 hex
address). A non-null servname string can be either a service name or a
@@ -388,23 +385,23 @@ DESCRIPTION
accept any socket type. A value of 0 for ai_protocol means the caller
will accept any protocol. For example, if the caller handles only TCP
and not UDP, then the ai_socktype member of the hints structure should be
set to SOCK_STREAM when getaddrinfo() is called. If the caller handles
only IPv4 and not IPv6, then the ai_family member of the hints structure
- should be set to PF_INET when getaddrinfo() is called. If the third ar-
- gument to getaddrinfo() is a null pointer, this is the same as if the
+ should be set to PF_INET when getaddrinfo() is called. If the third
+ argument to getaddrinfo() is a null pointer, this is the same as if the
caller had filled in an addrinfo structure initialized to zero with
ai_family set to PF_UNSPEC.
Upon successful return a pointer to a linked list of one or more addrinfo
structures is returned through the final argument. The caller can pro-
- cess each addrinfo structure in this list by following the ai_next point-
- er, until a null pointer is encountered. In each returned addrinfo
+ cess each addrinfo structure in this list by following the ai_next
+ pointer, until a null pointer is encountered. In each returned addrinfo
structure the three members ai_family, ai_socktype, and ai_protocol are
the corresponding arguments for a call to the socket() function. In each
- addrinfo structure the ai_addr member points to a filled-in socket ad-
- dress structure whose length is specified by the ai_addrlen member.
+ addrinfo structure the ai_addr member points to a filled-in socket
+ address structure whose length is specified by the ai_addrlen member.
If the AI_PASSIVE bit is set in the ai_flags member of the hints struc-
ture, then the caller plans to use the returned socket address structure
in a call to bind(). In this case, if the nodename argument is a null
pointer, then the IP address portion of the socket address structure will
@@ -412,14 +409,14 @@ DESCRIPTION
address.
If the AI_PASSIVE bit is not set in the ai_flags member of the hints
structure, then the returned socket address structure will be ready for a
call to connect() (for a connection-oriented protocol) or either
- connect(), sendto(), or sendmsg() (for a connectionless protocol). In
- this case, if the nodename argument is a null pointer, then the IP ad-
- dress portion of the socket address structure will be set to the loopback
- address.
+ connect(), sendto(), or sendmsg() (for a connectionless protocol). In
+ this case, if the nodename argument is a null pointer, then the IP
+ address portion of the socket address structure will be set to the loop-
+ back address.
If the AI_CANONNAME bit is set in the ai_flags member of the hints struc-
ture, then upon successful return the ai_canonname member of the first
addrinfo structure in the linked list will point to a NUL-terminated
string containing the canonical name of the specified nodename.
@@ -450,36 +447,35 @@ DESCRIPTION
o If you specify a numeric servname, while leaving ai_socktype and
ai_protocol unspecified, getaddrinfo() will raise an error. This is
because the numeric servname does not identify any socket type, and
getaddrinfo() is not allowed to glob the argument in such case.
- All of the information returned by getaddrinfo() is dynamically allocat-
- ed: the addrinfo structures, the socket address structures, and canonical
- node name strings pointed to by the addrinfo structures. To return this
- information to the system the function freeaddrinfo() is called. The
- addrinfo structure pointed to by the ai argument is freed, along with any
- dynamic storage pointed to by the structure. This operation is repeated
- until a NULL ai_next pointer is encountered.
-
+ All of the information returned by getaddrinfo() is dynamically allo-
+ cated: the addrinfo structures, the socket address structures, and canon-
+ ical node name strings pointed to by the addrinfo structures. To return
+ this information to the system the function freeaddrinfo() is called.
+ The addrinfo structure pointed to by the ai argument is freed, along with
+ any dynamic storage pointed to by the structure. This operation is
+ repeated until a NULL ai_next pointer is encountered.
To aid applications in printing error messages based on the EAI_xxx codes
returned by getaddrinfo(), gai_strerror() is defined. The argument is
one of the EAI_xxx values defined earlier and the return value points to
a string describing the error. If the argument is not one of the EAI_xxx
values, the function still returns a pointer to a string whose contents
indicate an unknown error.
Extension for scoped IPv6 address
The implementation allows experimental numeric IPv6 address notation with
- scope identifier. By appending the percent character and scope identifi-
- er to addresses, you can fill sin6_scope_id field for addresses. This
+ scope identifier. By appending the percent character and scope identi-
+ fier to addresses, you can fill sin6_scope_id field for addresses. This
would make management of scoped address easier, and allows cut-and-paste
input of scoped address.
At this moment the code supports only link-local addresses with the for-
mat. Scope identifier is hardcoded to name of hardware interface associ-
- ated with the link. (such as ne0). Example would be like
+ ated with the link. (such as ne0). Example would be like
``fe80::1%ne0'', which means ``fe80::1 on the link associated with ne0
interface''.
The implementation is still very experimental and non-standard. The cur-
rent implementation assumes one-by-one relationship between interface and
@@ -593,17 +589,17 @@ DIAGNOSTICS
string describing the given error code. If the argument is not one of
the EAI_xxx values, the function still returns a pointer to a string
whose contents indicate an unknown error.
SEE ALSO
- getnameinfo(3), gethostbyname(3), getservbyname(3), hosts(5),
- resolv.conf(5), services(5), hostname(7), named(8)
+ getnameinfo(3), gethostbyname(3), getservbyname(3), hosts(5),
+ resolv.conf(5), services(5), hostname(7), named(8)
R. Gilligan, S. Thomson, J. Bound, and W. Stevens, Basic Socket Interface
Extensions for IPv6, RFC2553, March 1999.
- Tatsuya Jinmei, and Atsushi Onoe, An Extension of Format for IPv6 Scoped
+ Tatsuya Jinmei and Atsushi Onoe, An Extension of Format for IPv6 Scoped
Addresses, internet draft, draft-ietf-ipngwg-scopedaddr-format-02.txt,
work in progress material.
Craig Metz, "Protocol Independence Using the Sockets API", Proceedings of
the freenix track: 2000 USENIX annual technical conference, June 2000.
@@ -620,59 +616,58 @@ STANDARDS
BUGS
The current implementation is not thread-safe.
The text was shamelessly copied from RFC2553.
-BSD Experimental May 25, 1995 5
+BSD May 25, 1995 BSD
</screen>
</sect1>
- <sect1 id="GETHOSTBYNAME">
- <title>GETHOSTBYNAME</title>
+ <sect1 id="net-common-tcpip-manpages-gethostbyname">
+ <title>gethostbyname</title>
<screen>
-
-GETHOSTBYNAME(3) System Programmer's Manual GETHOSTBYNAME(3)
+GETHOSTBYNAME(3) System Library Functions Manual GETHOSTBYNAME(3)
NAME
gethostbyname, gethostbyname2, gethostbyaddr, gethostent, sethostent,
endhostent, hstrerror, herror - get network host entry
SYNOPSIS
#include <netdb.h>
extern int h_errno;
struct hostent *
- gethostbyname(const char *name)
+ gethostbyname(const char *name);
struct hostent *
- gethostbyname2(const char *name, int af)
+ gethostbyname2(const char *name, int af);
struct hostent *
- gethostbyaddr(const char *addr, int len, int af)
+ gethostbyaddr(const char *addr, int len, int af);
struct hostent *
- gethostent(void)
+ gethostent(void);
void
- sethostent(int stayopen)
+ sethostent(int stayopen);
void
- endhostent(void)
+ endhostent(void);
void
- herror(const char *string)
+ herror(const char *string);
const char *
- hstrerror(int err)
+ hstrerror(int err);
DESCRIPTION
The gethostbyname() and gethostbyaddr() functions each return a pointer
to an object with the following structure describing an internet host
referenced by name or by address, respectively. This structure contains
either information obtained from the name server (i.e., resolver(3) and
- named(8)), broken-out fields from a line in /etc/hosts, or database en-
- tries supplied by the yp(8) system. resolv.conf(5) describes how the
+ named(8)), broken-out fields from a line in /etc/hosts, or database
+ entries supplied by the yp(8) system. resolv.conf(5) describes how the
particular database is chosen.
struct hostent {
char *h_name; /* official name of host */
char **h_aliases; /* alias list */
@@ -691,11 +686,10 @@ DESCRIPTION
h_addrtype The type of address being returned.
h_length The length, in bytes, of the address.
h_addr_list A zero-terminated array of network addresses for the host.
-
Host addresses are returned in network byte order.
h_addr The first address in h_addr_list; this is for backward com-
patibility.
@@ -705,11 +699,11 @@ DESCRIPTION
gethostbyname2() is an advanced form of gethostbyname() which allows
lookups in address families other than AF_INET, for example AF_INET6.
The gethostbyaddr() function will search for the specified address of
- length len in the address family af. The only address family currently
+ length len in the address family af. The only address family currently
supported is AF_INET.
The sethostent() function may be used to request the use of a connected
TCP socket for queries. If the stayopen flag is non-zero, this sets the
option to send all queries to the name server using TCP and to retain the
@@ -736,42 +730,42 @@ DIAGNOSTICS
The variable h_errno can have the following values:
HOST_NOT_FOUND No such host is known.
- TRY_AGAIN This is usually a temporary error and means that the lo-
- cal server did not receive a response from an authorita-
- tive server. A retry at some later time may succeed.
+ TRY_AGAIN This is usually a temporary error and means that the
+ local server did not receive a response from an authori-
+ tative server. A retry at some later time may succeed.
NO_RECOVERY Some unexpected server failure was encountered. This is
a non-recoverable error.
- NO_DATA The requested name is valid but does not have an IP ad-
- dress; this is not a temporary error. This means that
- the name is known to the name server but there is no ad-
- dress associated with this name. Another type of request
- to the name server using this domain name will result in
- an answer; for example, a mail-forwarder may be regis-
- tered for this domain.
+ NO_DATA The requested name is valid but does not have an IP
+ address; this is not a temporary error. This means that
+ the name is known to the name server but there is no
+ address associated with this name. Another type of
+ request to the name server using this domain name will
+ result in an answer; for example, a mail-forwarder may be
+ registered for this domain.
SEE ALSO
- resolver(3), getaddrinfo(3), getnameinfo(3), hosts(5),
- resolv.conf(5), hostname(7), named(8)
+ resolver(3), getaddrinfo(3), getnameinfo(3), hosts(5), resolv.conf(5),
+ hostname(7), named(8)
CAVEAT
If the search routines in resolv.conf(5) decide to read the /etc/hosts
file, gethostent() and other functions will read the next line of the
file, re-opening the file if necessary.
- The sethostent() function opens and/or rewinds the file /etc/hosts. If
+ The sethostent() function opens and/or rewinds the file /etc/hosts. If
the stayopen argument is non-zero, the file will not be closed after each
call to gethostbyname(), gethostbyname2(), or gethostbyaddr().
The endhostent() function closes the file.
HISTORY
- The herror() function appeared in 4.3BSD. The endhostent(),
+ The herror() function appeared in 4.3BSD. The endhostent(),
gethostbyaddr(), gethostbyname(), gethostent(), and sethostent() func-
tions appeared in 4.2BSD.
BUGS
These functions use static data storage; if the data is needed for future
@@ -779,40 +773,39 @@ BUGS
the Internet address formats are currently understood.
YP does not support any address families other than AF_INET and uses the
traditional database format.
-BSD Experimental March 13, 1997 3
+BSD March 13, 1997 BSD
</screen>
</sect1>
- <sect1 id="GETIFADDRS">
- <title>GETIFADDRS</title>
+ <sect1 id="net-common-tcpip-manpages-getifaddrs">
+ <title>getifaddrs</title>
<screen>
-
-GETIFADDRS(3) System Programmer's Manual GETIFADDRS(3)
+GETIFADDRS(3) System Library Functions Manual GETIFADDRS(3)
NAME
getifaddrs - get interface addresses
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
#include <ifaddrs.h>
int
- getifaddrs(struct ifaddrs **ifap)
+ getifaddrs(struct ifaddrs **ifap);
void
- freeifaddrs(struct ifaddrs *ifap)
+ freeifaddrs(struct ifaddrs *ifap);
DESCRIPTION
The getifaddrs() function stores a reference to a linked list of the net-
work interfaces on the local machine in the memory referenced by ifap.
The list consists of ifaddrs structures, as defined in the include file
- <ifaddrs.h>. The ifaddrs structure contains at least the following en-
- tries:
+ <ifaddrs.h>. The ifaddrs structure contains at least the following
+ entries:
struct ifaddrs *ifa_next; /* Pointer to next struct */
char *ifa_name; /* Interface name */
u_int ifa_flags; /* Interface flags */
struct sockaddr *ifa_addr; /* Interface address */
@@ -845,19 +838,19 @@ DESCRIPTION
This field, which should only be referenced for non-P2P inter-
faces, references the broadcast address associated with ifa_addr,
if one exists, otherwise it is NULL.
ifa_dstaddr
- References the destination address on a P2P interface, if one ex-
- ists, otherwise it is NULL.
+ References the destination address on a P2P interface, if one
+ exists, otherwise it is NULL.
ifa_data
References address family specific data. For AF_LINK addresses
- it contains a pointer to the struct if_data (as defined in in-
- clude file <net/if.h>) which contains various interface at-
- tributes and statistics. For all other address families, it con-
- tains a pointer to the struct ifa_data (as defined in include
+ it contains a pointer to the struct if_data (as defined in
+ include file <net/if.h>) which contains various interface
+ attributes and statistics. For all other address families, it
+ contains a pointer to the struct ifa_data (as defined in include
file <net/if.h>) which contains per-address interface statistics.
The data returned by getifaddrs() is dynamically allocated and should be
freed using freeifaddrs() when no longer needed.
@@ -865,33 +858,31 @@ RETURN VALUES
Upon successful completion, a value of 0 is returned. Otherwise, a value
of -1 is returned and errno is set to indicate the error.
ERRORS
The getifaddrs() may fail and set errno for any of the errors specified
- for the library routines ioctl(2), socket(2), malloc(3), or sysctl(3).
-
+ for the library routines ioctl(2), socket(2), malloc(3), or sysctl(3).
BUGS
If both <net/if.h> and <ifaddrs.h> are being included, <net/if.h> must be
included before <ifaddrs.h>.
SEE ALSO
- ioctl(2), socket(2), sysctl(3), networking(4), ifconfig(8)
+ ioctl(2), socket(2), sysctl(3), networking(4), ifconfig(8)
HISTORY
The getifaddrs() function first appeared in BSDI BSD/OS. The function is
- supplied on since
+ supplied on OpenBSD since OpenBSD 2.7.
- January 4, 2002 2
+BSD February 24, 2003 BSD
</screen>
</sect1>
- <sect1 id="GETNAMEINFO">
- <title>GETNAMEINFO</title>
+ <sect1 id="net-common-tcpip-manpages-getnameinfo">
+ <title>getnameinfo</title>
<screen>
-
-GETNAMEINFO(3) System Programmer's Manual GETNAMEINFO(3)
+GETNAMEINFO(3) System Library Functions Manual GETNAMEINFO(3)
NAME
getnameinfo - address-to-nodename translation in protocol-independent
manner
@@ -900,17 +891,17 @@ SYNOPSIS
#include <sys/socket.h>
#include <netdb.h>
int
getnameinfo(const struct sockaddr *sa, socklen_t salen, char *host,
- size_t hostlen, char *serv, size_t servlen, int flags)
+ size_t hostlen, char *serv, size_t servlen, int flags);
DESCRIPTION
The getnameinfo() function is defined for protocol-independent address-
to-nodename translation. Its functionality is a reverse conversion of
- getaddrinfo(3), and implements similar functionality with gethostbyad-
- dr(3) and getservbyport(3) in more sophisticated manner.
+ getaddrinfo(3), and implements similar functionality with
+ gethostbyaddr(3) and getservbyport(3) in more sophisticated manner.
This function looks up an IP address and port number provided by the
caller in the DNS and system-specific database, and returns text strings
for both in buffers provided by the caller. The function indicates suc-
cessful completion by a zero return value; a non-zero return value indi-
@@ -931,12 +922,12 @@ DESCRIPTION
enough to hold the nodename and the service name, including the terminat-
ing null characters.
Unfortunately most systems do not provide constants that specify the max-
imum size of either a fully-qualified domain name or a service name.
- Therefore to aid the application in allocating buffers for these two re-
- turned strings the following constants are defined in <netdb.h>:
+ Therefore to aid the application in allocating buffers for these two
+ returned strings the following constants are defined in <netdb.h>:
#define NI_MAXHOST MAXHOSTNAMELEN
#define NI_MAXSERV 32
The first value is actually defined as the constant MAXDNAME in recent
@@ -950,30 +941,30 @@ DESCRIPTION
only the nodename portion of the FQDN is returned for local hosts.
If the flag bit NI_NUMERICHOST is set, or if the host's name cannot be
located in the DNS, the numeric form of the host's address is returned
instead of its name (e.g., by calling inet_ntop() instead of
- gethostbyaddr()). If the flag bit NI_NAMEREQD is set, an error is re-
- turned if the host's name cannot be located in the DNS.
+ gethostbyaddr()). If the flag bit NI_NAMEREQD is set, an error is
+ returned if the host's name cannot be located in the DNS.
If the flag bit NI_NUMERICSERV is set, the numeric form of the service
address is returned (e.g., its port number) instead of its name. The two
NI_NUMERICxxx flags are required to support the -n flag that many com-
mands provide.
A fifth flag bit, NI_DGRAM, specifies that the service is a datagram ser-
vice, and causes getservbyport() to be called with a second argument of
- "udp" instead of its default of "tcp". This is required for the few ports
- (512-514) that have different services for UDP and TCP.
+ "udp" instead of its default of "tcp". This is required for the few
+ ports (512-514) that have different services for UDP and TCP.
These NI_xxx flags are defined in <netdb.h>.
Extension for scoped IPv6 address
The implementation allows experimental numeric IPv6 address notation with
scope identifier. IPv6 link-local address will appear as string like
- ``fe80::1%ne0'', if NI_WITHSCOPEID bit is enabled in flags argument. Re-
- fer to getaddrinfo(3) for the notation.
+ ``fe80::1%ne0'', if NI_WITHSCOPEID bit is enabled in flags argument.
+ Refer to getaddrinfo(3) for the notation.
EXAMPLES
The following code tries to get numeric hostname, and service name, for
given socket address. Observe that there is no hardcoded reference to
particular address family.
@@ -1003,38 +994,37 @@ EXAMPLES
DIAGNOSTICS
The function indicates successful completion by a zero return value; a
non-zero return value indicates failure. Error codes are as below:
- EAI_AGAIN The name could not be resolved at this time. Future at-
- tempts may succeed.
+ EAI_AGAIN The name could not be resolved at this time. Future
+ attempts may succeed.
- EAI_BADFLAGS The flags had an invalid value.
+ EAI_BADFLAGS The flags had an invalid value.
- EAI_FAIL A non-recoverable error occurred.
+ EAI_FAIL A non-recoverable error occurred.
- EAI_FAMILY The address family was not recognized or the address length
- was invalid for the specified family.
+ EAI_FAMILY The address family was not recognized or the address
+ length was invalid for the specified family.
- EAI_MEMORY There was a memory allocation failure.
+ EAI_MEMORY There was a memory allocation failure.
- EAI_NONAME The name does not resolve for the supplied parameters.
- NI_NAMEREQD is set and the host's name cannot be located,
+ EAI_NONAME The name does not resolve for the supplied parameters.
+ NI_NAMEREQD is set and the host's name cannot be
+ located, or both nodename and servname were null.
- or both nodename and servname were null.
-
- EAI_SYSTEM A system error occurred. The error code can be found in
- errno.
+ EAI_SYSTEM A system error occurred. The error code can be found
+ in errno.
SEE ALSO
- getaddrinfo(3), gethostbyaddr(3), getservbyport(3), hosts(5),
- resolv.conf(5), services(5), hostname(7), named(8)
+ getaddrinfo(3), gethostbyaddr(3), getservbyport(3), hosts(5),
+ resolv.conf(5), services(5), hostname(7), named(8)
R. Gilligan, S. Thomson, J. Bound, and W. Stevens, Basic Socket Interface
Extensions for IPv6, RFC2553, March 1999.
- Tatsuya Jinmei, and Atsushi Onoe, An Extension of Format for IPv6 Scoped
+ Tatsuya Jinmei and Atsushi Onoe, An Extension of Format for IPv6 Scoped
Addresses, internet draft, draft-ietf-ipngwg-scopedaddr-format-02.txt,
work in progress material.
Craig Metz, "Protocol Independence Using the Sockets API", Proceedings of
the freenix track: 2000 USENIX annual technical conference, June 2000.
@@ -1051,44 +1041,43 @@ STANDARDS
BUGS
The current implementation is not thread-safe.
The text was shamelessly copied from RFC2553.
- intentionally uses different NI_MAXHOST value from what RFC2553 suggests,
- to avoid buffer length handling mistakes.
+ OpenBSD intentionally uses different NI_MAXHOST value from what RFC2553
+ suggests, to avoid buffer length handling mistakes.
-BSD Experimental May 25, 1995 3
+BSD May 25, 1995 BSD
</screen>
</sect1>
- <sect1 id="GETNETENT">
- <title>GETNETENT</title>
+ <sect1 id="net-common-tcpip-manpages-getnetent">
+ <title>getnetent</title>
<screen>
-
-GETNETENT(3) System Programmer's Manual GETNETENT(3)
+GETNETENT(3) System Library Functions Manual GETNETENT(3)
NAME
getnetent, getnetbyaddr, getnetbyname, setnetent, endnetent - get network
entry
SYNOPSIS
#include <netdb.h>
struct netent *
- getnetent(void)
+ getnetent(void);
struct netent *
- getnetbyname(char *name)
+ getnetbyname(char *name);
struct netent *
- getnetbyaddr(in_addr_t net, int type)
+ getnetbyaddr(in_addr_t net, int type);
void
- setnetent(int stayopen)
+ setnetent(int stayopen);
void
- endnetent(void)
+ endnetent(void);
DESCRIPTION
The getnetent(), getnetbyname(), and getnetbyaddr() functions each return
a pointer to an object with the following structure containing the bro-
ken-out fields of a line in the network database, /etc/networks.
@@ -1126,18 +1115,17 @@ DESCRIPTION
no name server is configured, they sequentially search from the beginning
of the file until a matching net name or net address and type is found,
or until EOF is encountered. Network numbers are supplied in host order.
FILES
-
/etc/networks
DIAGNOSTICS
Null pointer (0) returned on EOF or error.
SEE ALSO
- resolver(3), networks(5)
+ resolver(3), networks(5)
HISTORY
The getnetent(), getnetbyaddr(), getnetbyname(), setnetent(), and
endnetent() functions appeared in 4.2BSD.
@@ -1146,41 +1134,40 @@ BUGS
the data, it should be copied before any subsequent calls to these func-
tions overwrite it. Only Internet network numbers are currently under-
stood. Expecting network numbers to fit in no more than 32 bits is
naive.
-BSD Experimental March 13, 1997 2
+BSD March 13, 1997 BSD
</screen>
</sect1>
- <sect1 id="GETPROTOENT">
- <title>GETPROTOENT</title>
+ <sect1 id="net-common-tcpip-manpages-getprotoent">
+ <title>getprotoent</title>
<screen>
-
-GETPROTOENT(3) System Programmer's Manual GETPROTOENT(3)
+GETPROTOENT(3) System Library Functions Manual GETPROTOENT(3)
NAME
getprotoent, getprotobynumber, getprotobyname, setprotoent, endprotoent -
get protocol entry
SYNOPSIS
#include <netdb.h>
struct protoent *
- getprotoent(void)
+ getprotoent(void);
struct protoent *
- getprotobyname(char *name)
+ getprotobyname(char *name);
struct protoent *
- getprotobynumber(int proto)
+ getprotobynumber(int proto);
void
- setprotoent(int stayopen)
+ setprotoent(int stayopen);
void
- endprotoent(void)
+ endprotoent(void);
DESCRIPTION
The getprotoent(), getprotobyname(), and getprotobynumber() functions
each return a pointer to an object with the following structure contain-
ing the broken-out fields of a line in the network protocol database,
@@ -1216,12 +1203,10 @@ DESCRIPTION
RETURN VALUES
Null pointer (0) returned on EOF or error.
FILES
-
-
/etc/protocols
SEE ALSO
protocols(5)
@@ -1232,36 +1217,35 @@ HISTORY
BUGS
These functions use a static data space; if the data is needed for future
use, it should be copied before any subsequent calls overwrite it. Only
the Internet protocols are currently understood.
-BSD Experimental June 4, 1993 2
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="GETRRSETBYNAME">
- <title>GETRRSETBYNAME</title>
+ <sect1 id="net-common-tcpip-manpages-getrrsetbyname">
+ <title>getrrsetbyname</title>
<screen>
-
-GETRRSETBYNAME(3) System Programmer's Manual GETRRSETBYNAME(3)
+GETRRSETBYNAME(3) System Library Functions Manual GETRRSETBYNAME(3)
NAME
getrrsetbyname - retrieve DNS records
SYNOPSIS
#include <netdb.h>
int
getrrsetbyname(const char *hostname, unsigned int rdclass,
- unsigned int rdtype, unsigned int flags, struct rrsetinfo **res)
+ unsigned int rdtype, unsigned int flags, struct rrsetinfo **res);
int
- freerrset(struct rrsetinfo **rrset)
+ freerrset(struct rrsetinfo **rrset);
DESCRIPTION
getrrsetbyname() gets a set of resource records associated with a
- hostname, class and type. hostname is a pointer a to null-terminated
+ hostname, class and type. hostname is a pointer a to null-terminated
string. The flags field is currently unused and must be zero.
After a successful call to getrrsetbyname(), *res is a pointer to an
rrsetinfo structure, containing a list of one or more rdatainfo struc-
tures containing resource records and potentially another list of
@@ -1297,81 +1281,79 @@ DESCRIPTION
name strings pointed to by the rrsetinfostructure. Memory allocated for
the dynamically allocated structures created by a successful call to
getrrsetbyname() is released by freerrset(). rrset is a pointer to a
struct rrset created by a call to getrrsetbyname().
- If the EDNS0 option is activated in resolv.conf(3), getrrsetbyname()
- will request DNSSEC authentication using the EDNS0 DNSSEC OK (DO) bit.
+ If the EDNS0 option is activated in resolv.conf(3), getrrsetbyname() will
+ request DNSSEC authentication using the EDNS0 DNSSEC OK (DO) bit.
RETURN VALUES
getrrsetbyname() returns zero on success, and one of the following error
codes if an error occurred:
-
ERRSET_NONAME the name does not exist
ERRSET_NODATA the name exists, but does not have data of the desired
type
ERRSET_NOMEMORY memory could not be allocated
ERRSET_INVAL a parameter is invalid
ERRSET_FAIL other failure
SEE ALSO
- resolver(3), resolv.conf(5), named(8)
+ resolver(3), resolv.conf(5), named(8)
AUTHORS
Jakob Schlyter <jakob at openbsd dot org>
HISTORY
- getrrsetbyname() first appeared in The API first appeared in ISC BIND
- version 9.
+ getrrsetbyname() first appeared in OpenBSD 3.0. The API first appeared
+ in ISC BIND version 9.
BUGS
The data in *rdi_data should be returned in uncompressed wire format.
Currently, the data is in compressed format and the caller can't uncom-
press since it doesn't have the full message.
CAVEATS
- The RRSET_VALIDATED flag in rri_flags is set if the AD (autenticated da-
- ta) bit in the DNS answer is set. This flag should not be trusted unless
- the transport between the nameserver and the resolver is secure (e.g.
- IPsec, trusted network, loopback communication).
+ The RRSET_VALIDATED flag in rri_flags is set if the AD (autenticated
+ data) bit in the DNS answer is set. This flag should not be trusted
+ unless the transport between the nameserver and the resolver is secure
+ (e.g. IPsec, trusted network, loopback communication).
-BSD Experimental Oct 18, 2000 2
+BSD Oct 18, 2000 BSD
</screen>
</sect1>
- <sect1 id="GETSERVENT">
- <title>GETSERVENT</title>
+ <sect1 id="net-common-tcpip-manpages-getservent">
+ <title>getservent</title>
<screen>
-
-GETSERVENT(3) System Programmer's Manual GETSERVENT(3)
+GETSERVENT(3) System Library Functions Manual GETSERVENT(3)
NAME
getservent, getservbyport, getservbyname, setservent, endservent - get
service entry
SYNOPSIS
#include <netdb.h>
struct servent *
- getservent(void)
+ getservent(void);
struct servent *
- getservbyname(char *name, char *proto)
+ getservbyname(char *name, char *proto);
struct servent *
- getservbyport(int port, char *proto)
+ getservbyport(int port, char *proto);
void
- setservent(int stayopen)
+ setservent(int stayopen);
void
- endservent(void)
+ endservent(void);
DESCRIPTION
- The getservent(), getservbyname(), and getservbyport() functions each re-
- turn a pointer to an object with the following structure containing the
+ The getservent(), getservbyname(), and getservbyport() functions each
+ return a pointer to an object with the following structure containing the
broken-out fields of a line in the network services database,
/etc/services.
struct servent {
char *s_name; /* official name of service */
@@ -1400,92 +1382,90 @@ DESCRIPTION
The endservent() function closes the file.
The getservbyname() and getservbyport() functions sequentially search
from the beginning of the file until a matching protocol name or port
- number (specified in network byte order) is found, or until EOF is en-
- countered. If a protocol name is also supplied (non-null), searches must
- also match the protocol.
+ number (specified in network byte order) is found, or until EOF is
+ encountered. If a protocol name is also supplied (non-null), searches
+ must also match the protocol.
FILES
-
/etc/services
DIAGNOSTICS
Null pointer (0) returned on EOF or error.
SEE ALSO
- getprotoent(3), services(5)
+ getprotoent(3), services(5)
HISTORY
The getservent(), getservbyport(), getservbyname(), setservent(), and
endservent() functions appeared in 4.2BSD.
BUGS
These functions use static data storage; if the data is needed for future
- use, it should be copied before any subsequent calls overwrite it. Ex-
- pecting port numbers to fit in a 32-bit quantity is probably naive.
+ use, it should be copied before any subsequent calls overwrite it.
+ Expecting port numbers to fit in a 32-bit quantity is probably naive.
-BSD Experimental January 12, 1994 2
+BSD January 12, 1994 BSD
</screen>
</sect1>
- <sect1 id="IF-NAMETOINDEX">
- <title>IF_NAMETOINDEX</title>
+ <sect1 id="net-common-tcpip-manpages-if-nametoindex">
+ <title>if_nametoindex</title>
<screen>
-
-IF_NAMETOINDEX(3) System Programmer's Manual IF_NAMETOINDEX(3)
+IF_NAMETOINDEX(3) System Library Functions Manual IF_NAMETOINDEX(3)
NAME
if_nametoindex, if_indextoname, if_nameindex, if_freenameindex - convert
interface index to name, and vice versa
SYNOPSIS
#include <net/if.h>
unsigned int
- if_nametoindex(const char *ifname)
+ if_nametoindex(const char *ifname);
char *
- if_indextoname(unsigned int ifindex, char *ifname)
+ if_indextoname(unsigned int ifindex, char *ifname);
struct if_nameindex *
- if_nameindex(void)
+ if_nameindex(void);
void
- if_freenameindex(struct if_nameindex *ptr)
+ if_freenameindex(struct if_nameindex *ptr);
DESCRIPTION
These functions map interface indexes to interface names (such as
``lo0''), and vice versa.
The if_nametoindex() function converts an interface name specified by the
ifname argument to an interface index (positive integer value). If the
specified interface does not exist, 0 will be returned.
- if_indextoname() converts an interface index specified by the ifindex ar-
- gument to an interface name. The ifname argument must point to a buffer
- of at least IF_NAMESIZE bytes into which the interface name corresponding
- to the specified index is returned. (IF_NAMESIZE is also defined in
- <net/if.h> and its value includes a terminating null byte at the end of
- the interface name.) This pointer is also the return value of the func-
- tion. If there is no interface corresponding to the specified index,
- NULL is returned.
+ if_indextoname() converts an interface index specified by the ifindex
+ argument to an interface name. The ifname argument must point to a
+ buffer of at least IF_NAMESIZE bytes into which the interface name corre-
+ sponding to the specified index is returned. (IF_NAMESIZE is also
+ defined in <net/if.h> and its value includes a terminating null byte at
+ the end of the interface name.) This pointer is also the return value of
+ the function. If there is no interface corresponding to the specified
+ index, NULL is returned.
if_nameindex() returns an array of if_nameindex structures.
if_nametoindex is also defined in <net/if.h>, and is as follows:
struct if_nameindex {
unsigned int if_index; /* 1, 2, ... */
char *if_name; /* null terminated name: "le0", ... */
};
The end of the array of structures is indicated by a structure with an
- if_index of 0 and an if_name of NULL. The function returns a null pointer
- on error. The memory used for this array of structures along with the
- interface names pointed to by the if_name members is obtained dynamical-
- ly. This memory is freed by the if_freenameindex() function.
+ if_index of 0 and an if_name of NULL. The function returns a null
+ pointer on error. The memory used for this array of structures along
+ with the interface names pointed to by the if_name members is obtained
+ dynamically. This memory is freed by the if_freenameindex() function.
if_freenameindex() takes a pointer that was returned by if_nameindex() as
argument (ptr), and it reclaims the region allocated.
DIAGNOSTICS
@@ -1498,19 +1478,18 @@ SEE ALSO
STANDARDS
These functions are defined in ``Basic Socket Interface Extensions for
IPv6'' (RFC2533).
-BSD Experimental May 21, 1998 2
+BSD May 21, 1998 BSD
</screen>
</sect1>
- <sect1 id="INET">
- <title>INET</title>
+ <sect1 id="net-common-tcpip-manpages-inet">
+ <title>inet</title>
<screen>
-
-INET(3) System Programmer's Manual INET(3)
+INET(3) System Library Functions Manual INET(3)
NAME
inet_addr, inet_aton, inet_lnaof, inet_makeaddr, inet_netof,
inet_network, inet_ntoa, inet_ntop, inet_pton - Internet address manipu-
lation routines
@@ -1519,64 +1498,64 @@ SYNOPSIS
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
in_addr_t
- inet_addr(const char *cp)
+ inet_addr(const char *cp);
int
- inet_aton(const char *cp, struct in_addr *addr)
+ inet_aton(const char *cp, struct in_addr *addr);
in_addr_t
- inet_lnaof(struct in_addr in)
+ inet_lnaof(struct in_addr in);
struct in_addr
- inet_makeaddr(unsigned long net, unsigned long lna)
+ inet_makeaddr(unsigned long net, unsigned long lna);
in_addr_t
- inet_netof(struct in_addr in)
+ inet_netof(struct in_addr in);
in_addr_t
- inet_network(const char *cp)
+ inet_network(const char *cp);
char *
- inet_ntoa(struct in_addr in)
+ inet_ntoa(struct in_addr in);
const char *
- inet_ntop(int af, const void *src, char *dst, size_t size)
+ inet_ntop(int af, const void *src, char *dst, size_t size);
int
- inet_pton(int af, const char *src, void *dst)
+ inet_pton(int af, const char *src, void *dst);
DESCRIPTION
The routines inet_aton(), inet_addr() and inet_network() interpret char-
acter strings representing numbers expressed in the Internet standard `.'
- notation. The inet_pton() function converts a presentation format ad-
- dress (that is, printable form as held in a character string) to network
- format (usually a struct in_addr or some other internal binary represen-
- tation, in network byte order). It returns 1 if the address was valid
- for the specified address family, or 0 if the address wasn't parseable in
- the specified address family, or -1 if some system error occurred (in
- which case errno will have been set). This function is presently valid
- for AF_INET and AF_INET6. The inet_aton() routine interprets the speci-
- fied character string as an Internet address, placing the address into
- the structure provided. It returns 1 if the string was successfully in-
- terpreted, or 0 if the string was invalid. The inet_addr() and
- inet_network() functions return numbers suitable for use as Internet ad-
- dresses and Internet network numbers, respectively.
+ notation. The inet_pton() function converts a presentation format
+ address (that is, printable form as held in a character string) to net-
+ work format (usually a struct in_addr or some other internal binary rep-
+ resentation, in network byte order). It returns 1 if the address was
+ valid for the specified address family, or 0 if the address wasn't
+ parseable in the specified address family, or -1 if some system error
+ occurred (in which case errno will have been set). This function is
+ presently valid for AF_INET and AF_INET6. The inet_aton() routine inter-
+ prets the specified character string as an Internet address, placing the
+ address into the structure provided. It returns 1 if the string was suc-
+ cessfully interpreted, or 0 if the string was invalid. The inet_addr()
+ and inet_network() functions return numbers suitable for use as Internet
+ addresses and Internet network numbers, respectively.
The function inet_ntop() converts an address from network format (usually
a struct in_addr or some other binary form, in network byte order) to
presentation format (suitable for external display purposes). It returns
NULL if a system error occurs (in which case, errno will have been set),
or it returns a pointer to the destination string. The routine
inet_ntoa() takes an Internet address and returns an ASCII string repre-
senting the address in `.' notation. The routine inet_makeaddr() takes
an Internet network number and a local network address and constructs an
Internet address from it. The routines inet_netof() and inet_lnaof()
- break apart Internet host addresses, returning the network number and lo-
- cal network address part, respectively.
+ break apart Internet host addresses, returning the network number and
+ local network address part, respectively.
All Internet addresses are returned in network order (bytes ordered from
left to right). All network numbers and local address parts are returned
as machine format integer values.
@@ -1591,33 +1570,34 @@ INTERNET ADDRESSES (IP VERSION 4)
When four parts are specified, each is interpreted as a byte of data and
assigned, from left to right, to the four bytes of an Internet address.
Note that when an Internet address is viewed as a 32-bit integer quantity
on a system that uses little-endian byte order (such as the Intel 386,
486 and Pentium processors) the bytes referred to above appear as
- ``d.c.b.a''. That is, little-endian bytes are ordered from right to left.
+ ``d.c.b.a''. That is, little-endian bytes are ordered from right to
+ left.
When a three part address is specified, the last part is interpreted as a
- 16-bit quantity and placed in the rightmost two bytes of the network ad-
- dress. This makes the three part address format convenient for specify-
- ing Class B network addresses as ``128.net.host''.
+ 16-bit quantity and placed in the rightmost two bytes of the network
+ address. This makes the three part address format convenient for speci-
+ fying Class B network addresses as ``128.net.host''.
When a two part address is supplied, the last part is interpreted as a
24-bit quantity and placed in the rightmost three bytes of the network
address. This makes the two part address format convenient for specify-
ing Class A network addresses as ``net.host''.
When only one part is given, the value is stored directly in the network
address without any byte rearrangement.
- All numbers supplied as ``parts'' in a `.' notation may be decimal, oc-
- tal, or hexadecimal, as specified in the C language (i.e., a leading 0x
+ All numbers supplied as ``parts'' in a `.' notation may be decimal,
+ octal, or hexadecimal, as specified in the C language (i.e., a leading 0x
or 0X implies hexadecimal; otherwise, a leading 0 implies octal; other-
wise, the number is interpreted as decimal).
INTERNET ADDRESSES (IP VERSION 6)
- In order to support scoped IPv6 addresses, getaddrinfo(3) and getnamein-
- fo(3) are recommended rather than the functions presented here.
+ In order to support scoped IPv6 addresses, getaddrinfo(3) and
+ getnameinfo(3) are recommended rather than the functions presented here.
The presentation format of an IPv6 address is given in [RFC1884 2.2]:
There are three conventional forms for representing IPv6 addresses as
text strings:
@@ -1635,16 +1615,15 @@ INTERNET ADDRESSES (IP VERSION 6)
2. Due to the method of allocating certain styles of IPv6 addresses, it
will be common for addresses to contain long strings of zero bits.
In order to make writing addresses
-
containing zero bits easier a special syntax is available to com-
press the zeros. The use of ``::'' indicates multiple groups of 16
bits of zeros. The ``::'' can only appear once in an address. The
- ``::'' can also be used to compress the leading and/or trailing ze-
- ros in an address.
+ ``::'' can also be used to compress the leading and/or trailing
+ zeros in an address.
For example the following addresses:
1080:0:0:0:8:800:200C:417A a unicast address
FF01:0:0:0:0:0:0:43 a multicast address
@@ -1676,89 +1655,90 @@ INTERNET ADDRESSES (IP VERSION 6)
DIAGNOSTICS
The constant INADDR_NONE is returned by inet_addr() and inet_network()
for malformed requests.
SEE ALSO
- byteorder(3), gethostbyname(3), getnetent(3), inet_net(3), hosts(5),
+ byteorder(3), gethostbyname(3), getnetent(3), inet_net(3), hosts(5),
networks(5)
STANDARDS
The inet_ntop and inet_pton functions conforms to the IETF IPv6 BSD API
- and address formatting specifications. Note that inet_pton does not ac-
- cept 1-, 2-, or 3-part dotted addresses; all four parts must be speci-
+ and address formatting specifications. Note that inet_pton does not
+ accept 1-, 2-, or 3-part dotted addresses; all four parts must be speci-
fied. This is a narrower input set than that accepted by inet_aton.
HISTORY
The inet_addr, inet_network, inet_makeaddr, inet_lnaof and inet_netof
- functions appeared in 4.2BSD. The inet_aton and inet_ntoa functions ap-
- peared in 4.3BSD. The inet_pton and inet_ntop functions appeared in BIND
- 4.9.4.
+ functions appeared in 4.2BSD. The inet_aton and inet_ntoa functions
+ appeared in 4.3BSD. The inet_pton and inet_ntop functions appeared in
+ BIND 4.9.4.
BUGS
The value INADDR_NONE (0xffffffff) is a valid broadcast address, but
inet_addr() cannot return that value without indicating failure. Also,
- inet_addr() should have been designed to return a struct in_addr. The
+ inet_addr() should have been designed to return a struct in_addr. The
newer inet_aton() function does not share these problems, and almost all
existing code should be modified to use inet_aton() instead.
The problem of host byte ordering versus network byte ordering is confus-
ing.
-
The string returned by inet_ntoa() resides in a static memory area.
+
+BSD June 18, 1997 BSD
</screen>
</sect1>
- <sect1 id="INET6-OPTION-SPACE">
- <title>INET6_OPTION_SPACE</title>
+ <sect1 id="net-common-tcpip-manpages-inet6-option-space">
+ <title>inet6_option_space</title>
<screen>
-
-INET6_OPTION_SPACE(3) System Programmer's Manual INET6_OPTION_SPACE(3)
+INET6_OPTION_SPACE(3) System Library Functions Manual INET6_OPTION_SPACE(3)
NAME
inet6_option_space, inet6_option_init, inet6_option_append,
inet6_option_alloc, inet6_option_next, inet6_option_find - IPv6 Hop-by-
Hop and Destination Options manipulation
SYNOPSIS
#include <netinet/in.h>
int
- inet6_option_space(int nbytes)
+ inet6_option_space(int nbytes);
int
- inet6_option_init(void *bp, struct cmsghdr **cmsgp, int type)
+ inet6_option_init(void *bp, struct cmsghdr **cmsgp, int type);
int
inet6_option_append(struct cmsghdr *cmsg, const u_int8_t *typep,
- int multx, int plusy)
+ int multx, int plusy);
u_int8_t *
inet6_option_alloc(struct cmsghdr *cmsg, int datalen, int multx,
- int plusy);
+ int plusy);;
int
- inet6_option_next(const struct cmsghdr *cmsg, u_int8_t **tptrp)
+ inet6_option_next(const struct cmsghdr *cmsg, u_int8_t **tptrp);
int
- inet6_option_find(const struct cmsghdr *cmsg, u_int8_t **tptrp, int type)
+ inet6_option_find(const struct cmsghdr *cmsg, u_int8_t **tptrp,
+ int type);
DESCRIPTION
- Building and parsing the Hop-by-Hop and Destination options is complicat-
- ed due to alignment constranints, padding and ancillary data manipula-
+ Building and parsing the Hop-by-Hop and Destination options is compli-
+ cated due to alignment constranints, padding and ancillary data manipula-
tion. RFC2292 defines a set of functions to help the application. The
function prototypes for these functions are all in the <netinet/in.h>
header.
inet6_option_space
- inet6_option_space() returns the number of bytes required to hold an op-
- tion when it is stored as ancillary data, including the cmsghdr structure
- at the beginning, and any padding at the end (to make its size a multiple
- of 8 bytes). The argument is the size of the structure defining the op-
- tion, which must include any pad bytes at the beginning (the value y in
- the alignment term ``xn + y''), the type byte, the length byte, and the
- option data.
+ inet6_option_space() returns the number of bytes required to hold an
+ option when it is stored as ancillary data, including the cmsghdr struc-
+ ture at the beginning, and any padding at the end (to make its size a
+ multiple of 8 bytes). The argument is the size of the structure defining
+ the option, which must include any pad bytes at the beginning (the value
+ y in the alignment term ``xn + y''), the type byte, the length byte, and
+ the option data.
Note: If multiple options are stored in a single ancillary data object,
which is the recommended technique, this function overestimates the
amount of space required by the size of N-1 cmsghdr structures, where N
is the number of options to be stored in the object. This is of little
@@ -1769,21 +1749,20 @@ DESCRIPTION
inet6_option_init
inet6_option_init() is called once per ancillary data object that will
contain either Hop-by-Hop or Destination options. It returns 0 on suc-
cess or -1 on an error.
- bp is a pointer to previously allocated space that will contain the an-
- cillary data object. It must be large enough to contain all the individ-
- ual options to be added by later calls to inet6_option_append() and
+ bp is a pointer to previously allocated space that will contain the
+ ancillary data object. It must be large enough to contain all the indi-
+ vidual options to be added by later calls to inet6_option_append() and
inet6_option_alloc().
-
cmsgp is a pointer to a pointer to a cmsghdr structure. *cmsgp is ini-
tialized by this function to point to the cmsghdr structure constructed
by this function in the buffer pointed to by bp.
- type is either IPV6_HOPOPTS or IPV6_DSTOPTS. This type is stored in the
+ type is either IPV6_HOPOPTS or IPV6_DSTOPTS. This type is stored in the
cmsg_type member of the cmsghdr structure pointed to by *cmsgp.
inet6_option_append
This function appends a Hop-by-Hop option or a Destination option into an
ancillary data object that has been initialized by inet6_option_init().
@@ -1802,81 +1781,81 @@ DESCRIPTION
reserved for the Pad1 and PadN options, respectively.)
The option data length must have a value between 0 and 255, inclusive,
and is the length of the option data that follows.
- multx is the value x in the alignment term ``xn + y''. It must have a
+ multx is the value x in the alignment term ``xn + y''. It must have a
value of 1, 2, 4, or 8.
- plusy is the value y in the alignment term ``xn + y''. It must have a
+ plusy is the value y in the alignment term ``xn + y''. It must have a
value between 0 and 7, inclusive.
inet6_option_alloc
This function appends a Hop-by-Hop option or a Destination option into an
ancillary data object that has been initialized by inet6_option_init().
This function returns a pointer to the 8-bit option type field that
starts the option on success, or NULL on an error.
The difference between this function and inet6_option_append() is that
- the latter copies the contents of a previously built option into the an-
- cillary data object while the current function returns a pointer to the
+ the latter copies the contents of a previously built option into the
+ ancillary data object while the current function returns a pointer to the
space in the data object where the option's TLV must then be built by the
caller.
cmsg is a pointer to the cmsghdr structure that must have been initial-
ized by inet6_option_init().
datalen is the value of the option data length byte for this option.
This value is required as an argument to allow the function to determine
- if padding must be appended at the end of the option. argument since
- the option data length must already be stored by the caller. (The
- inet6_option_append() function does not need a data length)
+ if padding must be appended at the end of the option. (The
+ inet6_option_append() function does not need a data length argument since
+ the option data length must already be stored by the caller.)
- multx is the value x in the alignment term ``xn + y''. It must have a
+ multx is the value x in the alignment term ``xn + y''. It must have a
value of 1, 2, 4, or 8.
- plusy is the value y in the alignment term ``xn + y''. It must have a
+ plusy is the value y in the alignment term ``xn + y''. It must have a
value between 0 and 7, inclusive.
inet6_option_next
This function processes the next Hop-by-Hop option or Destination option
in an ancillary data object. If another option remains to be processed,
- the return value of the function is 0 and *tptrp points to the 8-bit op-
- tion type field the option data (which is followed by the 8-bit option
- data length, followed by). If no more options remain to be processed, the
- return value is -1 and *tptrp is NULL. If an error occurs, the return
- value is -1 and *tptrp is not NULL.
+ the return value of the function is 0 and *tptrp points to the 8-bit
+ option type field (which is followed by the 8-bit option data length,
+ followed by the option data). If no more options remain to be processed,
+ the return value is -1 and *tptrp is NULL. If an error occurs, the
+ return value is -1 and *tptrp is not NULL.
cmsg is a pointer to cmsghdr structure of which cmsg_level equals
IPPROTO_IPV6 and cmsg_type equals either IPV6_HOPOPTS or IPV6_DSTOPTS.
tptrp is a pointer to a pointer to an 8-bit byte and *tptrp is used by
the function to remember its place in the ancillary data object each time
the function is called. The first time this function is called for a
given ancillary data object, *tptrp must be set to NULL.
- Each time this function returns success, *tptrp points to the 8-bit op-
- tion type field for the next option to be processed.
+ Each time this function returns success, *tptrp points to the 8-bit
+ option type field for the next option to be processed.
inet6_option_find
This function is similar to the previously described inet6_option_next()
function, except this function lets the caller specify the option type to
- be searched for, instead of always returning the next option in the an-
- cillary data object. cmsg is a pointer to cmsghdr structure of which
+ be searched for, instead of always returning the next option in the
+ ancillary data object. cmsg is a pointer to cmsghdr structure of which
cmsg_level equals IPPROTO_IPV6 and cmsg_type equals either IPV6_HOPOPTS
or IPV6_DSTOPTS.
tptrp is a pointer to a pointer to an 8-bit byte and *tptrp is used by
the function to remember its place in the ancillary data object each time
the function is called. The first time this function is called for a
- given ancillary data object, *tptrp must be set to NULL. ~ This function
+ given ancillary data object, *tptrp must be set to NULL. ~ This function
starts searching for an option of the specified type beginning after the
- value of *tptrp. If an option of the specified type is located, this
+ value of *tptrp. If an option of the specified type is located, this
function returns 0 and *tptrp points to the 8- bit option type field for
the option of the specified type. If an option of the specified type is
- not located, the return value is -1 and *tptrp is NULL. If an error oc-
- curs, the return value is -1 and *tptrp is not NULL.
+ not located, the return value is -1 and *tptrp is NULL. If an error
+ occurs, the return value is -1 and *tptrp is not NULL.
DIAGNOSTICS
inet6_option_init() and inet6_option_append() return 0 on success or -1
on an error.
@@ -1887,14 +1866,14 @@ DIAGNOSTICS
EXAMPLES
RFC2292 gives comprehensive examples in chapter 6.
SEE ALSO
- W. Stevens, and M. Thomas, Advanced Sockets API for IPv6, RFC2292,
+ W. Stevens and M. Thomas, Advanced Sockets API for IPv6, RFC2292,
February 1998.
- S. Deering, and R. Hinden, Internet Protocol, Version 6 (IPv6)
+ S. Deering and R. Hinden, Internet Protocol, Version 6 (IPv6)
Specification, RFC2460, December 1998.
HISTORY
The implementation first appeared in KAME advanced networking kit.
@@ -1903,19 +1882,18 @@ STANDARDS
(RFC2292).
BUGS
The text was shamelessly copied from RFC2292.
-BSD Experimental December 10, 1999 3
+BSD December 10, 1999 BSD
</screen>
</sect1>
- <sect1 id="INET6-RTHDR-SPACE">
- <title>INET6_RTHDR_SPACE</title>
+ <sect1 id="net-common-tcpip-manpages-inet6-rthdr-space">
+ <title>inet6_rthdr_space</title>
<screen>
-
-INET6_RTHDR_SPACE(3) System Programmer's Manual INET6_RTHDR_SPACE(3)
+INET6_RTHDR_SPACE(3) System Library Functions Manual INET6_RTHDR_SPACE(3)
NAME
inet6_rthdr_space, inet6_rthdr_init, inet6_rthdr_add,
inet6_rthdr_lasthop, inet6_rthdr_reverse, inet6_rthdr_segments,
inet6_rthdr_getaddr, inet6_rthdr_getflags - IPv6 Routing Header Options
@@ -1923,33 +1901,33 @@ NAME
SYNOPSIS
#include <netinet/in.h>
size_t
- inet6_rthdr_space(int type, int segments)
+ inet6_rthdr_space(int type, int segments);
struct cmsghdr *
- inet6_rthdr_init(void *bp, int type)
+ inet6_rthdr_init(void *bp, int type);
int
inet6_rthdr_add(struct cmsghdr *cmsg, const struct in6_addr *addr,
- unsigned int flags)
+ unsigned int flags);
int
- inet6_rthdr_lasthop(struct cmsghdr *cmsg, unsigned int flags)
+ inet6_rthdr_lasthop(struct cmsghdr *cmsg, unsigned int flags);
int
- inet6_rthdr_reverse(const struct cmsghdr *in, struct cmsghdr *out)
+ inet6_rthdr_reverse(const struct cmsghdr *in, struct cmsghdr *out);
int
- inet6_rthdr_segments(const struct cmsghdr *cmsg)
+ inet6_rthdr_segments(const struct cmsghdr *cmsg);
struct in6_addr *
- inet6_rthdr_getaddr(struct cmsghdr *cmsg, int index)
+ inet6_rthdr_getaddr(struct cmsghdr *cmsg, int index);
int
- inet6_rthdr_getflags(const struct cmsghdr *cmsg, int index)
+ inet6_rthdr_getflags(const struct cmsghdr *cmsg, int index);
DESCRIPTION
RFC2292 IPv6 advanced API defines eight functions that the application
calls to build and examine a Routing header. Four functions build a
Routing header:
@@ -1976,30 +1954,30 @@ DESCRIPTION
header.
inet6_rthdr_space
This function returns the number of bytes required to hold a Routing
header of the specified type containing the specified number of segments
- (addresses). For an IPv6 Type 0 Routing header, the number of segments
+ (addresses). For an IPv6 Type 0 Routing header, the number of segments
must be between 1 and 23, inclusive. The return value includes the size
- of the cmsghdr structure that precedes the Routing header, and any re-
- quired padding.
+ of the cmsghdr structure that precedes the Routing header, and any
+ required padding.
If the return value is 0, then either the type of the Routing header is
not supported by this implementation or the number of segments is invalid
for this type of Routing header.
- Note: This function returns the size but does not allocate the space re-
- quired for the ancillary data. This allows an application to allocate a
- larger buffer, if other ancillary data objects are desired, since all the
- ancillary data objects must be specified to sendmsg(2) as a single
+ Note: This function returns the size but does not allocate the space
+ required for the ancillary data. This allows an application to allocate
+ a larger buffer, if other ancillary data objects are desired, since all
+ the ancillary data objects must be specified to sendmsg(2) as a single
msg_control buffer.
inet6_rthdr_init
This function initializes the buffer pointed to by bp to contain a
- cmsghdr structure followed by a Routing header of the specified type. The
- cmsg_len member of the cmsghdr structure is initialized to the size of
- the structure plus the amount of space required by the Routing header.
+ cmsghdr structure followed by a Routing header of the specified type.
+ The cmsg_len member of the cmsghdr structure is initialized to the size
+ of the structure plus the amount of space required by the Routing header.
The cmsg_level and cmsg_type members are also initialized as required.
The caller must allocate the buffer and its size can be determined by
calling inet6_rthdr_space().
@@ -2008,11 +1986,11 @@ DESCRIPTION
Upon an error the return value is NULL.
inet6_rthdr_add
This function adds the address pointed to by addr to the end of the Rout-
ing header being constructed and sets the type of this hop to the value
- of flags. For an IPv6 Type 0 Routing header, flags must be either
+ of flags. For an IPv6 Type 0 Routing header, flags must be either
IPV6_RTHDR_LOOSE or IPV6_RTHDR_STRICT.
If successful, the cmsg_len member of the cmsghdr structure is updated to
account for the new address in the Routing header and the return value of
the function is 0. Upon an error the return value of the function is -1.
@@ -2037,30 +2015,28 @@ DESCRIPTION
The return value of the function is 0 on success, or -1 upon an error.
inet6_rthdr_segments
This function returns the number of segments (addresses) contained in the
- Routing header described by cmsg. On success the return value is between
- 1 and 23, inclusive. The return value of the function is -1 upon an er-
- ror.
-
+ Routing header described by cmsg. On success the return value is between
+ 1 and 23, inclusive. The return value of the function is -1 upon an
+ error.
inet6_rthdr_getaddr
This function returns a pointer to the IPv6 address specified by index
- inet6_rthdr_segments() (which must have a value between 1 and the
- value returned by) in the Routing header described by cmsg. An applica-
- tion should first call inet6_rthdr_segments() to obtain the number of
- segments in the Routing header.
+ (which must have a value between 1 and the value returned by
+ inet6_rthdr_segments()) in the Routing header described by cmsg. An
+ application should first call inet6_rthdr_segments() to obtain the number
+ of segments in the Routing header.
Upon an error the return value of the function is NULL.
inet6_rthdr_getflags
- This function returns the flags value specified by index
- inet6_rthdr_segments() (which must have a value between 0 and the
- value returned by) in the Routing header described by cmsg. For an IPv6
- Type 0 Routing header the return value will be either IPV6_RTHDR_LOOSE or
- IPV6_RTHDR_STRICT.
+ This function returns the flags value specified by index (which must have
+ a value between 0 and the value returned by inet6_rthdr_segments()) in
+ the Routing header described by cmsg. For an IPv6 Type 0 Routing header
+ the return value will be either IPV6_RTHDR_LOOSE or IPV6_RTHDR_STRICT.
Upon an error the return value of the function is -1.
Note: Addresses are indexed starting at 1, and flags starting at 0, to
maintain consistency with the terminology and figures in RFC2460.
@@ -2077,14 +2053,14 @@ DIAGNOSTICS
EXAMPLES
RFC2292 gives comprehensive examples in chapter 8.
SEE ALSO
- W. Stevens, and M. Thomas, Advanced Sockets API for IPv6, RFC2292,
+ W. Stevens and M. Thomas, Advanced Sockets API for IPv6, RFC2292,
February 1998.
- S. Deering, and R. Hinden, Internet Protocol, Version 6 (IPv6)
+ S. Deering and R. Hinden, Internet Protocol, Version 6 (IPv6)
Specification, RFC2460, December 1998.
HISTORY
The implementation first appeared in KAME advanced networking kit.
@@ -2095,19 +2071,18 @@ STANDARDS
BUGS
The text was shamelessly copied from RFC2292.
inet6_rthdr_reverse() is not implemented yet.
-BSD Experimental December 10, 1999 3
+BSD December 10, 1999 BSD
</screen>
</sect1>
- <sect1 id="INET-NET">
- <title>INET_NET</title>
+ <sect1 id="net-common-tcpip-manpages-inet-net">
+ <title>inet_net</title>
<screen>
-
-INET_NET(3) System Programmer's Manual INET_NET(3)
+INET_NET(3) System Library Functions Manual INET_NET(3)
NAME
inet_net_ntop, inet_net_pton - Internet network number manipulation rou-
tines
@@ -2115,14 +2090,14 @@ SYNOPSIS
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
char *
- inet_net_ntop(int af, const void *src, int bits, char *dst, size_t size)
+ inet_net_ntop(int af, const void *src, int bits, char *dst, size_t size);
int
- inet_net_pton(int af, const char *src, void *dst, size_t size)
+ inet_net_pton(int af, const char *src, void *dst, size_t size);
DESCRIPTION
The inet_net_ntop() function converts an Internet network number from
network format (usually a struct in_addr or some other binary form, in
network byte order) to CIDR presentation format (suitable for external
@@ -2137,12 +2112,12 @@ DESCRIPTION
representation, in network byte order). It returns the number of bits
(either computed based on the class, or specified with /CIDR), or -1 if a
failure occurred (in which case errno will have been set. It will be set
to ENOENT if the Internet network number was not valid).
- The only value for af currently supported is AF_INET. size is the size of
- the result buffer dst.
+ The only value for af currently supported is AF_INET. size is the size
+ of the result buffer dst.
NETWORK NUMBERS (IP VERSION 4)
Internet network numbers may be specified in one of the following forms:
a.b.c.d/bits
@@ -2154,11 +2129,11 @@ NETWORK NUMBERS (IP VERSION 4)
When four parts are specified, each is interpreted as a byte of data and
assigned, from left to right, to the four bytes of an Internet network
number. Note that when an Internet network number is viewed as a 32-bit
integer quantity on a system that uses little-endian byte order (such as
the Intel 386, 486, and Pentium processors) the bytes referred to above
- appear as ``d.c.b.a''. That is, little-endian bytes are ordered from
+ appear as ``d.c.b.a''. That is, little-endian bytes are ordered from
right to left.
When a three part number is specified, the last part is interpreted as a
16-bit quantity and placed in the rightmost two bytes of the Internet
network number. This makes the three part number format convenient for
@@ -2167,52 +2142,50 @@ NETWORK NUMBERS (IP VERSION 4)
When a two part number is supplied, the last part is interpreted as a
24-bit quantity and placed in the rightmost three bytes of the Internet
network number. This makes the two part number format convenient for
specifying Class A network numbers as ``net.host''.
-
When only one part is given, the value is stored directly in the Internet
network number without any byte rearrangement.
- All numbers supplied as ``parts'' in a `.' notation may be decimal, oc-
- tal, or hexadecimal, as specified in the C language (i.e., a leading 0x
+ All numbers supplied as ``parts'' in a `.' notation may be decimal,
+ octal, or hexadecimal, as specified in the C language (i.e., a leading 0x
or 0X implies hexadecimal; otherwise, a leading 0 implies octal; other-
wise, the number is interpreted as decimal).
SEE ALSO
- byteorder(3), inet(3), networks(5)
+ byteorder(3), inet(3), networks(5)
HISTORY
The inet_net_ntop and inet_net_pton functions first appeared in BIND
4.9.4.
-BSD Experimental June 18, 1997 2
+BSD June 18, 1997 BSD
</screen>
</sect1>
- <sect1 id="IPX">
- <title>IPX</title>
+ <sect1 id="net-common-tcpip-manpages-ipx">
+ <title>ipx</title>
<screen>
-
-IPX(3) System Programmer's Manual IPX(3)
+IPX(3) System Library Functions Manual IPX(3)
NAME
ipx_addr, ipx_ntoa - IPX address conversion routines
SYNOPSIS
#include <sys/types.h>
#include <netipx/ipx.h>
struct ipx_addr
- ipx_addr(const char *cp)
+ ipx_addr(const char *cp);
char *
- ipx_ntoa(struct ipx_addr ipx)
+ ipx_ntoa(struct ipx_addr ipx);
DESCRIPTION
- The routine ipx_addr() interprets character strings representing IPX ad-
- dresses, returning binary information suitable for use in system calls.
+ The routine ipx_addr() interprets character strings representing IPX
+ addresses, returning binary information suitable for use in system calls.
The routine ipx_ntoa() takes IPX addresses and returns ASCII strings rep-
resenting the address in a notation in common use:
<network number>.<host number>.<port number>
@@ -2221,63 +2194,62 @@ DESCRIPTION
ing super-decimal digits will have a trailing `H' appended.
An effort has been made to ensure that ipx_addr() be compatible with most
formats in common use. It will first separate an address into 1 to 3
fields using a single delimiter chosen from period (`.'), colon (`:'), or
- pound-sign (`#'). Each field is then examined for byte separators (colon
+ pound-sign (`#'). Each field is then examined for byte separators (colon
or period). If there are byte separators, each subfield separated is
taken to be a small hexadecimal number, and the entirety is taken as a
- network-byte-ordered quantity to be zero extended in the high-network-or-
- der bytes. Next, the field is inspected for hyphens, in which case the
+ network-byte-ordered quantity to be zero extended in the high-network-
+ order bytes. Next, the field is inspected for hyphens, in which case the
field is assumed to be a number in decimal notation with hyphens separat-
- ing the millenia. Next, the field is assumed to be a number: It is in-
- terpreted as hexadecimal if there is a leading `0x' (as in C), a trailing
- `H' (as in Mesa), or there are any super-decimal digits present. It is
- interpreted as octal is there is a leading `0' and there are no super-oc-
- tal digits. Otherwise, it is converted as a decimal number.
+ ing the millenia. Next, the field is assumed to be a number: It is
+ interpreted as hexadecimal if there is a leading `0x' (as in C), a trail-
+ ing `H' (as in Mesa), or there are any super-decimal digits present. It
+ is interpreted as octal is there is a leading `0' and there are no super-
+ octal digits. Otherwise, it is converted as a decimal number.
RETURN VALUES
None. (See BUGS.)
SEE ALSO
- ns(4), hosts(5), networks(5)
+ ns(4), hosts(5), networks(5)
HISTORY
The precursor ns_addr() and ns_ntoa() functions appeared in 4.3BSD.
BUGS
The string returned by ipx_ntoa() resides in a static memory area. The
function ipx_addr() should diagnose improperly formed input, and there
should be an unambiguous way to recognize this.
-BSD Experimental June 4, 1993 1
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="ISO-ADDR">
- <title>ISO_ADDR</title>
+ <sect1 id="net-common-tcpip-manpages-iso-addr">
+ <title>iso_addr</title>
<screen>
-
-ISO_ADDR(3) System Programmer's Manual ISO_ADDR(3)
+ISO_ADDR(3) System Library Functions Manual ISO_ADDR(3)
NAME
iso_addr, iso_ntoa - network address conversion routines for Open System
Interconnection
SYNOPSIS
#include <sys/types.h>
#include <netiso/iso.h>
struct iso_addr *
- iso_addr(char *cp)
+ iso_addr(char *cp);
char *
- iso_ntoa(struct iso_addr *isoa)
+ iso_ntoa(struct iso_addr *isoa);
DESCRIPTION
- The routine iso_addr() interprets character strings representing OSI ad-
- dresses, returning binary information suitable for use in system calls.
+ The routine iso_addr() interprets character strings representing OSI
+ addresses, returning binary information suitable for use in system calls.
The routine iso_ntoa() takes OSI addresses and returns ASCII strings rep-
resenting NSAPs (network service access points) in a notation inverse to
that accepted by iso_addr().
Unfortunately, no universal standard exists for representing OSI network
@@ -2294,11 +2266,11 @@ DESCRIPTION
following an odd number of bytes has the effect of causing the byte of
address being translated to have its higher order bits filled with zeros.
RETURN VALUES
iso_ntoa() always returns a null terminated string. iso_addr() always
- returns a pointer to a struct iso_addr. (See BUGS.)
+ returns a pointer to a struct iso_addr. (See BUGS.)
SEE ALSO
iso(4)
HISTORY
@@ -2308,19 +2280,18 @@ BUGS
The returned values reside in a static memory area.
The function iso_addr() should diagnose improperly formed input, and
there should be an unambiguous way to recognize this.
-BSD Experimental June 4, 1993 1
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="LINK-ADDR">
- <title>LINK_ADDR</title>
+ <sect1 id="net-common-tcpip-manpages-link-addr">
+ <title>link_addr</title>
<screen>
-
-LINK_ADDR(3) System Programmer's Manual LINK_ADDR(3)
+LINK_ADDR(3) System Library Functions Manual LINK_ADDR(3)
NAME
link_addr, link_ntoa - elementary address specification routines for link
level access
@@ -2328,14 +2299,14 @@ SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
#include <net/if_dl.h>
void
- link_addr(const char *addr, struct sockaddr_dl *sdl)
+ link_addr(const char *addr, struct sockaddr_dl *sdl);
char *
- link_ntoa(const struct sockaddr_dl *sdl)
+ link_ntoa(const struct sockaddr_dl *sdl);
DESCRIPTION
The link_addr() function interprets character strings representing link-
level addresses, returning binary information suitable for use in system
calls. link_ntoa() takes a link-level address and returns an ASCII
@@ -2343,24 +2314,24 @@ DESCRIPTION
level address itself, and the interface name or number, if present. This
facility is experimental and is still subject to change.
For link_addr(), the string addr may contain an optional network inter-
face identifier of the form ``name unit-number'', suitable for the first
- argument to ifconfig(8), followed in all cases by a colon and an inter-
- face address in the form of groups of hexadecimal digits separated by pe-
- riods. Each group represents a byte of address; address bytes are filled
- left to right from low order bytes through high order bytes.
+ argument to ifconfig(8), followed in all cases by a colon and an inter-
+ face address in the form of groups of hexadecimal digits separated by
+ periods. Each group represents a byte of address; address bytes are
+ filled left to right from low order bytes through high order bytes.
Thus le0:8.0.9.13.d.30 represents an Ethernet address to be transmitted
on the first Lance Ethernet interface.
RETURN VALUES
link_ntoa() always returns a null-terminated string. link_addr() has no
return value. (See BUGS.)
SEE ALSO
- iso(4), ifconfig(8)
+ iso(4), ifconfig(8)
HISTORY
The link_addr() and link_ntoa() functions appeared in 4.3BSD-Reno.
BUGS
@@ -2372,28 +2343,27 @@ BUGS
If the sdl_len field of the link socket address sdl is 0, link_ntoa()
will not insert a colon before the interface address bytes. If this
translated address is given to link_addr() without inserting an initial
colon, the latter will not interpret it correctly.
-BSD Experimental July 28, 1993 1
+BSD July 28, 1993 BSD
</screen>
</sect1>
- <sect1 id="NET-ADDRCMP">
- <title>NET_ADDRCMP</title>
+ <sect1 id="net-common-tcpip-manpages-net-addrcmp">
+ <title>net_addrcmp</title>
<screen>
-
-NET_ADDRCMP(3) System Programmer's Manual NET_ADDRCMP(3)
+NET_ADDRCMP(3) System Library Functions Manual NET_ADDRCMP(3)
NAME
net_addrcmp - compare socket address structures
SYNOPSIS
#include <netdb.h>
int
- net_addrcmp(struct sockaddr *sa1, struct sockaddr *sa2)
+ net_addrcmp(struct sockaddr *sa1, struct sockaddr *sa2);
DESCRIPTION
The net_addrcmp() function compares two socket address structures, sa1
and sa2.
@@ -2412,87 +2382,86 @@ RETURN VALUES
match, the protocol-specific data (the sa_data field) is compared. If
there's a match, both sa1 and sa2 must refer to the same address, and 0
is returned; otherwise, a value >0 or <0 is returned.
HISTORY
- A net_addrcmp() function was added in
+ A net_addrcmp() function was added in OpenBSD 2.5.
-BSD Experimental July 3, 1999 1
+BSD July 3, 1999 BSD
</screen>
</sect1>
- <sect1 id="NS">
- <title>NS</title>
+ <sect1 id="net-common-tcpip-manpages-ns">
+ <title>ns</title>
<screen>
-
-NS(3) System Programmer's Manual NS(3)
+NS(3) System Library Functions Manual NS(3)
NAME
ns_addr, ns_ntoa - Xerox NS(tm) address conversion routines
SYNOPSIS
#include <sys/types.h>
#include <netns/ns.h>
struct ns_addr
- ns_addr(char *cp)
+ ns_addr(char *cp);
char *
- ns_ntoa(struct ns_addr ns)
+ ns_ntoa(struct ns_addr ns);
DESCRIPTION
- The routine ns_addr() interprets character strings representing XNS ad-
- dresses, returning binary information suitable for use in system calls.
+ The routine ns_addr() interprets character strings representing XNS
+ addresses, returning binary information suitable for use in system calls.
The routine ns_ntoa() takes XNS addresses and returns ASCII strings rep-
resenting the address in a notation in common use in the Xerox Develop-
ment Environment:
<network number>.<host number>.<port number>
Trailing zero fields are suppressed, and each number is printed in hex-
adecimal, in a format suitable for input to ns_addr(). Any fields lack-
ing super-decimal digits will have a trailing `H' appended.
- Unfortunately, no universal standard exists for representing XNS address-
- es. An effort has been made to ensure that ns_addr() be compatible with
- most formats in common use. It will first separate an address into 1 to
- 3 fields using a single delimiter chosen from period (`.'), colon (`:'),
- or pound-sign `#'. Each field is then examined for byte separators (colon
- or period). If there are byte separators, each subfield separated is
- taken to be a small hexadecimal number, and the entirety is taken as a
- network-byte-ordered quantity to be zero extended in the high-network-or-
- der bytes. Next, the field is inspected for hyphens, in which case the
- field is assumed to be a number in decimal notation with hyphens separat-
- ing the millenia. Next, the field is assumed to be a number: It is in-
- terpreted as hexadecimal if there is a leading `0x' (as in C), a trailing
- `H' (as in Mesa), or there are any super-decimal digits present. It is
- interpreted as octal is there is a leading `0' and there are no super-oc-
- tal digits. Otherwise, it is converted as a decimal number.
+ Unfortunately, no universal standard exists for representing XNS
+ addresses. An effort has been made to ensure that ns_addr() be compati-
+ ble with most formats in common use. It will first separate an address
+ into 1 to 3 fields using a single delimiter chosen from period (`.'),
+ colon (`:'), or pound-sign `#'. Each field is then examined for byte
+ separators (colon or period). If there are byte separators, each sub-
+ field separated is taken to be a small hexadecimal number, and the
+ entirety is taken as a network-byte-ordered quantity to be zero extended
+ in the high-network-order bytes. Next, the field is inspected for
+ hyphens, in which case the field is assumed to be a number in decimal
+ notation with hyphens separating the millenia. Next, the field is
+ assumed to be a number: It is interpreted as hexadecimal if there is a
+ leading `0x' (as in C), a trailing `H' (as in Mesa), or there are any
+ super-decimal digits present. It is interpreted as octal is there is a
+ leading `0' and there are no super-octal digits. Otherwise, it is con-
+ verted as a decimal number.
RETURN VALUES
None. (See BUGS.)
SEE ALSO
- hosts(5), networks(5)
+ hosts(5), networks(5)
HISTORY
The ns_addr() and ns_toa() functions appeared in 4.3BSD.
BUGS
The string returned by ns_ntoa() resides in a static memory area. The
function ns_addr() should diagnose improperly formed input, and there
should be an unambiguous way to recognize this.
-BSD Experimental June 4, 1993 1
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="RESOLVER">
- <title>RESOLVER</title>
+ <sect1 id="net-common-tcpip-manpages-resolver">
+ <title>resolver</title>
<screen>
-
-RESOLVER(3) System Programmer's Manual RESOLVER(3)
+RESOLVER(3) System Library Functions Manual RESOLVER(3)
NAME
res_query, res_search, res_mkquery, res_send, res_init, dn_comp,
dn_expand - resolver routines
@@ -2501,41 +2470,41 @@ SYNOPSIS
#include <netinet/in.h>
#include <arpa/nameser.h>
#include <resolv.h>
int
- res_query(char *dname, int class, int type, u_char *answer, int anslen)
+ res_query(char *dname, int class, int type, u_char *answer, int anslen);
int
- res_search(char *dname, int class, int type, u_char *answer, int anslen)
+ res_search(char *dname, int class, int type, u_char *answer, int anslen);
int
res_mkquery(int op, char *dname, int class, int type, char *data,
- int datalen, struct rrec *newrr, char *buf, int buflen)
+ int datalen, struct rrec *newrr, char *buf, int buflen);
int
- res_send(char *msg, int msglen, char *answer, int anslen)
+ res_send(char *msg, int msglen, char *answer, int anslen);
int
- res_init(void)
+ res_init(void);
int
dn_comp(char *exp_dn, char *comp_dn, int length, char **dnptrs,
- char **lastdnptr)
+ char **lastdnptr);
int
dn_expand(u_char *msg, u_char *eomorig, u_char *comp_dn, u_char *exp_dn,
- int length)
+ int length);
DESCRIPTION
These routines are used for making, sending, and interpreting query and
reply messages with Internet domain name servers.
Global configuration and state information that is used by the resolver
- routines is kept in the structure _res. Most of the values have reason-
- able defaults and can be ignored. Options stored in _res.options are de-
- fined in <resolv.h> and are as follows. Options are stored as a simple
+ routines is kept in the structure _res. Most of the values have reason-
+ able defaults and can be ignored. Options stored in _res.options are
+ defined in <resolv.h> and are as follows. Options are stored as a simple
bit mask containing the bitwise OR of the options enabled.
RES_INIT True if the initial name server address and default domain
name are initialized (i.e., res_init() has been called).
@@ -2546,160 +2515,158 @@ DESCRIPTION
answer or finds an error. Currently this is not imple-
mented.
RES_USEVC Use TCP connections for queries instead of UDP datagrams.
- RES_STAYOPEN Used with RES_USEVC to keep the TCP connection open be-
- tween queries. This is useful only in programs that regu-
- larly do many queries. UDP should be the normal mode
+ RES_STAYOPEN Used with RES_USEVC to keep the TCP connection open
+ between queries. This is useful only in programs that
+ regularly do many queries. UDP should be the normal mode
used.
RES_IGNTC Unused currently (ignore truncation errors, i.e., don't
-
retry with TCP).
- RES_RECURSE Set the recursion-desired bit in queries. This is the de-
- fault. (res_send() does not do iterative queries and ex-
- pects the name server to handle recursion.)
+ RES_RECURSE Set the recursion-desired bit in queries. This is the
+ default. (res_send() does not do iterative queries and
+ expects the name server to handle recursion.)
RES_DEFNAMES If set, res_search() will append the default domain name
to single-component names (those that do not contain a
dot). This option is enabled by default.
RES_DNSRCH If this option is set, res_search() will search for host
names in the current domain and in parent domains; see
hostname(7). This is used by the standard host lookup
- routine gethostbyname(3). This option is enabled by de-
- fault.
+ routine gethostbyname(3). This option is enabled by
+ default.
RES_USE_INET6 Enables support for IPv6-only applications. This causes
IPv4 addresses to be returned as an IPv4 mapped address.
For example, 10.1.1.1 will be returned as ::ffff:10.1.1.1.
- The option is not meaningful on
+ The option is not meaningful on OpenBSD.
The res_init() routine reads the configuration file (if any; see
- resolv.conf(5)) to get the default domain name, search list, and the In-
- ternet address of the local name server(s). If no server is configured,
- the host running the resolver is tried. The current domain name is de-
- fined by the hostname if not specified in the configuration file; it can
- be overridden by the environment variable LOCALDOMAIN. This environment
- variable may contain several blank-separated tokens if you wish to over-
- ride the search list on a per-process basis. This is similar to the
+ resolv.conf(5)) to get the default domain name, search list, and the
+ Internet address of the local name server(s). If no server is config-
+ ured, the host running the resolver is tried. The current domain name is
+ defined by the hostname if not specified in the configuration file; it
+ can be overridden by the environment variable LOCALDOMAIN. This environ-
+ ment variable may contain several blank-separated tokens if you wish to
+ override the search list on a per-process basis. This is similar to the
search command in the configuration file. Another environment variable
RES_OPTIONS can be set to override certain internal resolver options
which are otherwise set by changing fields in the _res structure or are
inherited from the configuration file's options command. The syntax of
the RES_OPTIONS environment variable is explained in resolv.conf(5).
Initialization normally occurs on the first call to one of the following
routines.
The res_query() function provides an interface to the server query mecha-
- nism. It constructs a query, sends it to the local server, awaits a re-
- sponse, and makes preliminary checks on the reply. The query requests
+ nism. It constructs a query, sends it to the local server, awaits a
+ response, and makes preliminary checks on the reply. The query requests
information of the specified type and class for the specified fully qual-
- ified domain name dname. The reply message is left in the answer buffer
+ ified domain name dname. The reply message is left in the answer buffer
with length anslen supplied by the caller.
The res_search() routine makes a query and awaits a response like
res_query(), but in addition, it implements the default and search rules
controlled by the RES_DEFNAMES and RES_DNSRCH options. It returns the
first successful reply.
The remaining routines are lower-level routines used by res_query(). The
res_mkquery() function constructs a standard query message and places it
- in buf. It returns the size of the query, or -1 if the query is larger
- than buflen. The query type op is usually QUERY, but can be any of the
- query types defined in <arpa/nameser.h>. The domain name for the query is
- given by dname. newrr is currently unused but is intended for making up-
- date messages.
+ in buf. It returns the size of the query, or -1 if the query is larger
+ than buflen. The query type op is usually QUERY, but can be any of the
+ query types defined in <arpa/nameser.h>. The domain name for the query
+ is given by dname. newrr is currently unused but is intended for making
+ update messages.
The res_send() routine sends a pre-formatted query and returns an answer.
- It will call res_init() if RES_INIT is not set, send the query to the lo-
- cal name server, and handle timeouts and retries. The length of the re-
- ply message is returned, or -1 if there were errors.
+ It will call res_init() if RES_INIT is not set, send the query to the
+ local name server, and handle timeouts and retries. The length of the
+ reply message is returned, or -1 if there were errors.
The dn_comp() function compresses the domain name exp_dn and stores it in
- comp_dn. The size of the compressed name is returned or -1 if there were
+ comp_dn. The size of the compressed name is returned or -1 if there were
errors. The size of the array pointed to by comp_dn is given by length.
The compression uses an array of pointers dnptrs to previously compressed
names in the current message. The first pointer points to the beginning
- of the message and the list ends with NULL. The limit to the array is
- specified by lastdnptr. A side effect of dn_comp() is to update the list
+ of the message and the list ends with NULL. The limit to the array is
+ specified by lastdnptr. A side effect of dn_comp() is to update the list
of pointers for labels inserted into the message as the name is com-
pressed. If dnptr is NULL, names are not compressed. If lastdnptr is
NULL, the list of labels is not updated.
The dn_expand() entry expands the compressed domain name comp_dn to a
full domain name The compressed name is contained in a query or reply
message; msg is a pointer to the beginning of the message. The uncom-
pressed name is placed in the buffer indicated by exp_dn which is of size
- length. The size of compressed name is returned or -1 if there was an er-
- ror.
+ length. The size of compressed name is returned or -1 if there was an
+ error.
FILES
/etc/resolv.conf configuration file see resolv.conf(5).
SEE ALSO
- gethostbyname(3), resolv.conf(5), hostname(7), named(8)
+ gethostbyname(3), resolv.conf(5), hostname(7), named(8)
RFC1032, RFC1033, RFC1034, RFC1035, RFC1535, RFC974
Name Server Operations Guide for BIND.
HISTORY
The res_query function appeared in 4.3BSD.
-BSD Experimental June 4, 1993 3
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="ACCEPT">
- <title>ACCEPT</title>
+ <sect1 id="net-common-tcpip-manpages-accept">
+ <title>accept</title>
<screen>
-
-ACCEPT(2) System Programmer's Manual ACCEPT(2)
+ACCEPT(2) System Calls Manual ACCEPT(2)
NAME
accept - accept a connection on a socket
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
- accept(int s, struct sockaddr *addr, socklen_t *addrlen)
+ accept(int s, struct sockaddr *addr, socklen_t *addrlen);
DESCRIPTION
- The argument s is a socket that has been created with socket(2), bound
- to an address with bind(2), and is listening for connections after a
+ The argument s is a socket that has been created with socket(2), bound to
+ an address with bind(2), and is listening for connections after a
listen(2). The accept() argument extracts the first connection request
on the queue of pending connections, creates a new socket with the same
properties of s, and allocates a new file descriptor for the socket. If
no pending connections are present on the queue, and the socket is not
marked as non-blocking, accept() blocks the caller until a connection is
present. If the socket is marked non-blocking and no pending connections
are present on the queue, accept() returns an error as described below.
The accepted socket may not be used to accept more connections. The
original socket s remains open.
- The argument addr is a result parameter that is filled in with the ad-
- dress of the connecting entity as known to the communications layer. The
- exact format of the addr parameter is determined by the domain in which
- the communication is occurring. The addrlen is a value-result parameter;
- it should initially contain the amount of space pointed to by addr; on
- return it will contain the actual length (in bytes) of the address re-
- turned. This call is used with connection-based socket types, currently
- with SOCK_STREAM.
+ The argument addr is a result parameter that is filled in with the
+ address of the connecting entity as known to the communications layer.
+ The exact format of the addr parameter is determined by the domain in
+ which the communication is occurring. The addrlen is a value-result
+ parameter; it should initially contain the amount of space pointed to by
+ addr; on return it will contain the actual length (in bytes) of the
+ address returned. This call is used with connection-based socket types,
+ currently with SOCK_STREAM.
It is possible to select(2) or poll(2) a socket for the purposes of doing
an accept() by selecting it for read.
For certain protocols which require an explicit confirmation, such as ISO
or DATAKIT, accept() can be thought of as merely dequeuing the next con-
- nection request and not implying confirmation. Confirmation can be im-
- plied by a normal read or write on the new file descriptor, and rejection
- can be implied by closing the new socket.
+ nection request and not implying confirmation. Confirmation can be
+ implied by a normal read or write on the new file descriptor, and rejec-
+ tion can be implied by closing the new socket.
One can obtain user connection request data without confirming the con-
nection by issuing a recvmsg(2) call with an msg_iovlen of 0 and a non-
zero msg_controllen, or by issuing a getsockopt(2) request. Similarly,
one can provide user connection rejection information by issuing a
@@ -2711,60 +2678,55 @@ RETURN VALUES
integer that is a descriptor for the accepted socket.
ERRORS
The accept() will fail if:
- [EBADF] The descriptor is invalid.
-
- [ENOTSOCK] The descriptor references a file, not a socket.
+ [EBADF] The descriptor is invalid.
- [EOPNOTSUPP] The referenced socket is not of type SOCK_STREAM.
+ [ENOTSOCK] The descriptor references a file, not a socket.
- [EINVAL] The referenced socket is not listening for connections
+ [EOPNOTSUPP] The referenced socket is not of type SOCK_STREAM.
- (that is, listen(2) has not yet been called).
+ [EINVAL] The referenced socket is not listening for connections
+ (that is, listen(2) has not yet been called).
- [EFAULT] The addr parameter is not in a writable part of the user
- address space.
+ [EFAULT] The addr parameter is not in a writable part of the
+ user address space.
- [EWOULDBLOCK]
- The socket is marked non-blocking and no connections are
- present to be accepted.
+ [EWOULDBLOCK] The socket is marked non-blocking and no connections
+ are present to be accepted.
- [EMFILE] The per-process descriptor table is full.
+ [EMFILE] The per-process descriptor table is full.
- [ENFILE] The system file table is full.
+ [ENFILE] The system file table is full.
- [ECONNABORTED]
- A connection has been aborted.
+ [ECONNABORTED] A connection has been aborted.
SEE ALSO
- bind(2), connect(2), listen(2), poll(2), select(2), poll(2), sock-
- et(2)
+ bind(2), connect(2), listen(2), poll(2), select(2), poll(2), socket(2)
HISTORY
The accept() function appeared in 4.2BSD.
-BSD Experimental February 15, 1999 2
+BSD February 15, 1999 BSD
</screen>
</sect1>
- <sect1 id="BIND">
- <title>BIND</title>
+ <sect1 id="net-common-tcpip-manpages-bind">
+ <title>bind</title>
<screen>
-
-BIND(2) System Programmer's Manual BIND(2)
+BIND(2) System Calls Manual BIND(2)
NAME
bind - bind a name to a socket
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
- bind(int s, const struct sockaddr *name, socklen_t namelen)
+ bind(int s, const struct sockaddr *name, socklen_t namelen);
DESCRIPTION
bind() assigns a name to an unnamed socket. When a socket is created
with socket(2) it exists in a name space (address family) but has no name
assigned. bind() requests that name be assigned to the socket.
@@ -2782,191 +2744,181 @@ RETURN VALUES
indicates an error, which is further specified in the global errno.
ERRORS
The bind() call will fail if:
- [EBADF] S is not a valid descriptor.
+ [EBADF] S is not a valid descriptor.
- [ENOTSOCK] S is not a socket.
+ [ENOTSOCK] S is not a socket.
- [EADDRNOTAVAIL]
- The specified address is not available from the local ma-
- chine.
+ [EADDRNOTAVAIL] The specified address is not available from the local
+ machine.
- [EADDRINUSE] The specified address is already in use.
+ [EADDRINUSE] The specified address is already in use.
- [EINVAL] The socket is already bound to an address.
+ [EINVAL] The socket is already bound to an address.
- [EINVAL] The family of the socket and that requested in
- name->sa_family are not equivalent.
+ [EINVAL] The family of the socket and that requested in
+ name->sa_family are not equivalent.
- [EACCES] The requested address is protected, and the current user
- has inadequate permission to access it.
+ [EACCES] The requested address is protected, and the current
+ user has inadequate permission to access it.
- [EFAULT] The name parameter is not in a valid part of the user ad-
- dress space.
+ [EFAULT] The name parameter is not in a valid part of the user
+ address space.
The following errors are specific to binding names in the UNIX domain.
- [ENOTDIR] A component of the path prefix is not a directory.
-
- [ENAMETOOLONG]
- A component of a pathname exceeded {NAME_MAX} characters,
- or an entire path name exceeded {PATH_MAX} characters.
+ [ENOTDIR] A component of the path prefix is not a directory.
- [ENOENT] A prefix component of the path name does not exist.
+ [ENAMETOOLONG] A component of a pathname exceeded {NAME_MAX} charac-
+ ters, or an entire path name exceeded {PATH_MAX} char-
+ acters.
- [ELOOP] Too many symbolic links were encountered in translating the
+ [ENOENT] A prefix component of the path name does not exist.
- pathname.
+ [ELOOP] Too many symbolic links were encountered in translat-
+ ing the pathname.
- [EIO] An I/O error occurred while making the directory entry or
- allocating the inode.
+ [EIO] An I/O error occurred while making the directory entry
+ or allocating the inode.
- [EROFS] The name would reside on a read-only file system.
+ [EROFS] The name would reside on a read-only file system.
- [EISDIR] An empty pathname was specified.
+ [EISDIR] An empty pathname was specified.
SEE ALSO
- connect(2), getsockname(2), listen(2), socket(2)
+ connect(2), getsockname(2), listen(2), socket(2)
HISTORY
The bind() function call appeared in 4.2BSD.
-BSD Experimental February 15, 1999 2
+BSD February 15, 1999 BSD
</screen>
</sect1>
- <sect1 id="CONNECT">
- <title>CONNECT</title>
+ <sect1 id="net-common-tcpip-manpages-connect">
+ <title>connect</title>
<screen>
-
-CONNECT(2) System Programmer's Manual CONNECT(2)
+CONNECT(2) System Calls Manual CONNECT(2)
NAME
connect - initiate a connection on a socket
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
- connect(int s, const struct sockaddr *name, socklen_t namelen)
+ connect(int s, const struct sockaddr *name, socklen_t namelen);
DESCRIPTION
The parameter s is a socket. If it is of type SOCK_DGRAM, this call
- specifies the peer with which the socket is to be associated; this ad-
- dress is that to which datagrams are to be sent, and the only address
+ specifies the peer with which the socket is to be associated; this
+ address is that to which datagrams are to be sent, and the only address
from which datagrams are to be received. If the socket is of type
SOCK_STREAM, this call attempts to make a connection to another socket.
The other socket is specified by name, which is an address in the commu-
nications space of the socket. Each communications space interprets the
- name parameter in its own way. Generally, stream sockets may successful-
- ly connect() only once; datagram sockets may use connect() multiple times
- to change their association. Datagram sockets may dissolve the associa-
- tion by connecting to an invalid address, such as a null address.
+ name parameter in its own way. Generally, stream sockets may success-
+ fully connect() only once; datagram sockets may use connect() multiple
+ times to change their association. Datagram sockets may dissolve the
+ association by connecting to an invalid address, such as a null address.
RETURN VALUES
If the connection or binding succeeds, 0 is returned. Otherwise a -1 is
returned, and a more specific error code is stored in errno.
ERRORS
The connect() call fails if:
- [EBADF] S is not a valid descriptor.
-
- [ENOTSOCK] S is a descriptor for a file, not a socket.
+ [EBADF] S is not a valid descriptor.
- [EADDRNOTAVAIL]
- The specified address is not available on this machine.
+ [ENOTSOCK] S is a descriptor for a file, not a socket.
- [EAFNOSUPPORT]
- Addresses in the specified address family cannot be used
- with this socket.
+ [EADDRNOTAVAIL] The specified address is not available on this
+ machine.
- [EISCONN] The socket is already connected.
+ [EAFNOSUPPORT] Addresses in the specified address family cannot be
+ used with this socket.
- [ETIMEDOUT] Connection establishment timed out without establishing a
- connection.
+ [EISCONN] The socket is already connected.
- [EINVAL] A TCP connection with a local broadcast, the all-ones or a
- multicast address as the peer was attempted.
+ [ETIMEDOUT] Connection establishment timed out without establish-
+ ing a connection.
- [ECONNREFUSED]
- The attempt to connect was forcefully rejected.
+ [EINVAL] A TCP connection with a local broadcast, the all-ones
+ or a multicast address as the peer was attempted.
- [EINTR] A connect was interrupted before it succeeded by the deliv-
- ery of a signal.
+ [ECONNREFUSED] The attempt to connect was forcefully rejected.
- [ENETUNREACH]
- The network isn't reachable from this host.
+ [EINTR] A connect was interrupted before it succeeded by the
+ delivery of a signal.
- [EADDRINUSE] The address is already in use.
+ [ENETUNREACH] The network isn't reachable from this host.
- [EFAULT] The name parameter specifies an area outside the process
+ [EADDRINUSE] The address is already in use.
- address space.
+ [EFAULT] The name parameter specifies an area outside the pro-
+ cess address space.
- [EINPROGRESS]
- The socket is non-blocking and the connection cannot be
- completed immediately. It is possible to select(2) or
- poll(2) for completion by selecting the socket for writing,
- and also use getsockopt(2) with SO_ERROR to check for error
- conditions.
+ [EINPROGRESS] The socket is non-blocking and the connection cannot
+ be completed immediately. It is possible to select(2)
+ or poll(2) for completion by selecting the socket for
+ writing, and also use getsockopt(2) with SO_ERROR to
+ check for error conditions.
- [EALREADY] The socket is non-blocking and a previous connection at-
- tempt has not yet been completed.
+ [EALREADY] The socket is non-blocking and a previous connection
+ attempt has not yet been completed.
The following errors are specific to connecting names in the UNIX domain.
These errors may not apply in future versions of the UNIX IPC domain.
- [ENOTDIR] A component of the path prefix is not a directory.
+ [ENOTDIR] A component of the path prefix is not a directory.
- [ENAMETOOLONG]
- A component of a pathname exceeded {NAME_MAX} characters,
- or an entire path name exceeded {PATH_MAX} characters.
+ [ENAMETOOLONG] A component of a pathname exceeded {NAME_MAX} charac-
+ ters, or an entire path name exceeded {PATH_MAX} char-
+ acters.
- [ENOENT] The named socket does not exist.
+ [ENOENT] The named socket does not exist.
- [EACCES] Search permission is denied for a component of the path
- prefix.
+ [EACCES] Search permission is denied for a component of the
+ path prefix.
- [EACCES] Write access to the named socket is denied.
+ [EACCES] Write access to the named socket is denied.
- [ELOOP] Too many symbolic links were encountered in translating the
- pathname.
+ [ELOOP] Too many symbolic links were encountered in translat-
+ ing the pathname.
SEE ALSO
- accept(2), getsockname(2), getsockopt(2), poll(2), select(2), sock-
- et(2)
+ accept(2), getsockname(2), getsockopt(2), poll(2), select(2), socket(2)
HISTORY
The connect() function call appeared in 4.2BSD.
-BSD Experimental February 15, 1999 2
+BSD February 15, 1999 BSD
</screen>
</sect1>
- <sect1 id="GETPEERNAME">
- <title>GETPEERNAME</title>
+ <sect1 id="net-common-tcpip-manpages-getpeername">
+ <title>getpeername</title>
<screen>
-
-GETPEERNAME(2) System Programmer's Manual GETPEERNAME(2)
+GETPEERNAME(2) System Calls Manual GETPEERNAME(2)
NAME
getpeername - get name of connected peer
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
- getpeername(int s, struct sockaddr *name, socklen_t *namelen)
+ getpeername(int s, struct sockaddr *name, socklen_t *namelen);
DESCRIPTION
getpeername() returns the address information of the peer connected to
- socket s. One common use occurs when a process inherits an open socket,
+ socket s. One common use occurs when a process inherits an open socket,
such as TCP servers forked from inetd(8). In this scenario,
getpeername() is used to determine the connecting client's IP address.
getpeername() takes three parameters:
@@ -2992,53 +2944,52 @@ DESCRIPTION
If name does not point to enough space to hold the entire socket address,
the result will be truncated to namelen bytes.
RETURN VALUES
If the call succeeds, a 0 is returned and namelen is set to the actual
- size of the socket address returned in name. Otherwise, errno is set and
+ size of the socket address returned in name. Otherwise, errno is set and
a value of -1 is returned.
ERRORS
On failure, errno is set to one of the following:
- [EBADF] The argument s is not a valid descriptor.
+ [EBADF] The argument s is not a valid descriptor.
- [ENOTSOCK] The argument s is a file, not a socket.
+ [ENOTSOCK] The argument s is a file, not a socket.
- [ENOTCONN] The socket is not connected.
+ [ENOTCONN] The socket is not connected.
- [ENOBUFS] Insufficient resources were available in the system to per-
- form the operation.
+ [ENOBUFS] Insufficient resources were available in the system to
+ perform the operation.
- [EFAULT] The name parameter points to memory not in a valid part of
- the process address space.
+ [EFAULT] The name parameter points to memory not in a valid
+ part of the process address space.
SEE ALSO
- accept(2), bind(2), getsockname(2), getpeereid(2), socket(2)
+ accept(2), bind(2), getsockname(2), getpeereid(2), socket(2)
HISTORY
The getpeername() function call appeared in 4.2BSD.
-BSD Experimental July 17, 1999 2
+BSD July 17, 1999 BSD
</screen>
</sect1>
- <sect1 id="GETSOCKNAME">
- <title>GETSOCKNAME</title>
+ <sect1 id="net-common-tcpip-manpages-getsockname">
+ <title>getsockname</title>
<screen>
-
-GETSOCKNAME(2) System Programmer's Manual GETSOCKNAME(2)
+GETSOCKNAME(2) System Calls Manual GETSOCKNAME(2)
NAME
getsockname - get socket name
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
- getsockname(int s, struct sockaddr *name, socklen_t *namelen)
+ getsockname(int s, struct sockaddr *name, socklen_t *namelen);
DESCRIPTION
getsockname() returns the locally bound address information for a speci-
fied socket.
@@ -3078,75 +3029,72 @@ DESCRIPTION
If name does not point to enough space to hold the entire socket address,
the result will be truncated to namelen bytes.
RETURN VALUES
On success, getsockname() returns a 0, and namelen is set to the actual
- size of the socket address returned in name. Otherwise, errno is set, and
- a value of -1 is returned.
+ size of the socket address returned in name. Otherwise, errno is set,
+ and a value of -1 is returned.
ERRORS
If getsockname() fails, errno is set to one of the following:
- [EBADF] The argument s is not a valid descriptor.
-
-
+ [EBADF] The argument s is not a valid descriptor.
- [ENOTSOCK] The argument s is a file, not a socket.
+ [ENOTSOCK] The argument s is a file, not a socket.
- [ENOBUFS] Insufficient resources were available in the system to per-
- form the operation.
+ [ENOBUFS] Insufficient resources were available in the system to
+ perform the operation.
- [EFAULT] The name parameter points to memory not in a valid part of
- the process address space.
+ [EFAULT] The name parameter points to memory not in a valid
+ part of the process address space.
SEE ALSO
- accept(2), bind(2), getpeername(2), getpeereid(2), socket(2)
+ accept(2), bind(2), getpeername(2), getpeereid(2), socket(2)
BUGS
Names bound to sockets in the UNIX domain are inaccessible; getsockname
returns a zero length name.
HISTORY
The getsockname() function call appeared in 4.2BSD.
-BSD Experimental July 17, 1999 2
+BSD July 17, 1999 BSD
</screen>
</sect1>
- <sect1 id="GETSOCKOPT">
- <title>GETSOCKOPT</title>
+ <sect1 id="net-common-tcpip-manpages-getsockopt">
+ <title>getsockopt</title>
<screen>
-
-GETSOCKOPT(2) System Programmer's Manual GETSOCKOPT(2)
+GETSOCKOPT(2) System Calls Manual GETSOCKOPT(2)
NAME
getsockopt, setsockopt - get and set options on sockets
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
getsockopt(int s, int level, int optname, void *optval,
- socklen_t *optlen)
+ socklen_t *optlen);
int
setsockopt(int s, int level, int optname, const void *optval,
- socklen_t optlen)
+ socklen_t optlen);
DESCRIPTION
getsockopt() and setsockopt() manipulate the options associated with a
socket. Options may exist at multiple protocol levels; they are always
present at the uppermost ``socket'' level.
When manipulating socket options the level at which the option resides
and the name of the option must be specified. To manipulate options at
- the socket level, level is specified as SOL_SOCKET. To manipulate options
- at any other level the protocol number of the appropriate protocol con-
- trolling the option is supplied. For example, to indicate that an option
- is to be interpreted by the TCP protocol, level should be set to the pro-
- tocol number of TCP; see getprotoent(3).
+ the socket level, level is specified as SOL_SOCKET. To manipulate
+ options at any other level the protocol number of the appropriate proto-
+ col controlling the option is supplied. For example, to indicate that an
+ option is to be interpreted by the TCP protocol, level should be set to
+ the protocol number of TCP; see getprotoent(3).
The parameters optval and optlen are used to access option values for
setsockopt(). For getsockopt() they identify a buffer in which the value
for the requested option(s) are to be returned. For getsockopt(), optlen
is a value-result parameter, initially containing the size of the buffer
@@ -3158,30 +3106,28 @@ DESCRIPTION
priate protocol module for interpretation. The include file
<sys/socket.h> contains definitions for socket level options, described
below. Options at other protocol levels vary in format and name; consult
the appropriate entries in section 4 of the manual.
- Most socket-level options utilize an int parameter for optval. For
- setsockopt(), the parameter should be non-zero to enable a boolean op-
- tion, or zero if the option is to be disabled. SO_LINGER uses a struct
+ Most socket-level options utilize an int parameter for optval. For
+ setsockopt(), the parameter should be non-zero to enable a boolean
+ option, or zero if the option is to be disabled. SO_LINGER uses a struct
linger parameter, defined in <sys/socket.h>, which specifies the desired
state of the option and the linger interval (see below). SO_SNDTIMEO and
SO_RCVTIMEO use a struct timeval parameter, defined in <sys/time.h>.
- The following options are recognized at the socket level. Except as not-
- ed, each may be examined with getsockopt() and set with setsockopt().
+ The following options are recognized at the socket level. Except as
+ noted, each may be examined with getsockopt() and set with setsockopt().
SO_DEBUG enables recording of debugging information
SO_REUSEADDR enables local address reuse
SO_REUSEPORT enables duplicate address and port bindings
SO_KEEPALIVE enables keep connections alive
SO_DONTROUTE enables routing bypass for outgoing messages
SO_LINGER linger on close if data present
SO_BROADCAST enables permission to transmit broadcast messages
SO_OOBINLINE enables reception of out-of-band data in band
-
-
SO_SNDBUF set buffer size for output
SO_RCVBUF set buffer size for input
SO_SNDLOWAT set minimum count for output
SO_RCVLOWAT set minimum count for input
SO_SNDTIMEO set timeout value for output
@@ -3203,13 +3149,13 @@ DESCRIPTION
ing messages should bypass the standard routing facilities. Instead,
messages are directed to the appropriate network interface according to
the network portion of the destination address.
SO_LINGER controls the action taken when unsent messages are queued on
- socket and a close(2) is performed. If the socket promises reliable de-
- livery of data and SO_LINGER is set, the system will block the process on
- the close(2) attempt until it is able to transmit the data or until it
+ socket and a close(2) is performed. If the socket promises reliable
+ delivery of data and SO_LINGER is set, the system will block the process
+ on the close(2) attempt until it is able to transmit the data or until it
decides it is unable to deliver the information (a timeout period mea-
sured in seconds, termed the linger interval, is specified in the
setsockopt() call when SO_LINGER is requested). If SO_LINGER is disabled
and a close(2) is issued, the system will process the close in a manner
that allows the process to continue as quickly as possible.
@@ -3225,37 +3171,36 @@ DESCRIPTION
tively. The buffer size may be increased for high-volume connections, or
may be decreased to limit the possible backlog of incoming data. The
system places an absolute limit on these values.
SO_SNDLOWAT is an option to set the minimum count for output operations.
- Most output operations process all of the data supplied by the call, de-
- livering data to the protocol for transmission and blocking as necessary
- for flow control. Nonblocking output operations will process as much da-
- ta as permitted subject to flow control without blocking, but will pro-
- cess no data if flow control does not allow the smaller of the low water
- mark value or the entire request to be processed. A select(2) or poll(2)
- operation testing the ability to write to a socket will return true only
- if the low water mark amount could be processed. The default value for
- SO_SNDLOWAT is set to a convenient size for network efficiency, often
- 1024. SO_RCVLOWAT is an option to set the minimum count for input opera-
- tions. In general, receive calls will block until any (non-zero) amount
- of data is received, then return with the smaller of the amount available
- or the amount requested. The default value for SO_RCVLOWAT is 1. If
- SO_RCVLOWAT is set to a larger value, blocking receive calls normally
- wait until they have received the smaller of the low water mark value or
- the requested amount. Receive calls may still return less than the low
- water mark if an error occurs, a signal is caught, or the type of data
- next in the receive queue is different than that returned.
-
+ Most output operations process all of the data supplied by the call,
+ delivering data to the protocol for transmission and blocking as neces-
+ sary for flow control. Nonblocking output operations will process as
+ much data as permitted subject to flow control without blocking, but will
+ process no data if flow control does not allow the smaller of the low
+ water mark value or the entire request to be processed. A select(2) or
+ poll(2) operation testing the ability to write to a socket will return
+ true only if the low water mark amount could be processed. The default
+ value for SO_SNDLOWAT is set to a convenient size for network efficiency,
+ often 1024. SO_RCVLOWAT is an option to set the minimum count for input
+ operations. In general, receive calls will block until any (non-zero)
+ amount of data is received, then return with the smaller of the amount
+ available or the amount requested. The default value for SO_RCVLOWAT is
+ 1. If SO_RCVLOWAT is set to a larger value, blocking receive calls nor-
+ mally wait until they have received the smaller of the low water mark
+ value or the requested amount. Receive calls may still return less than
+ the low water mark if an error occurs, a signal is caught, or the type of
+ data next in the receive queue is different than that returned.
SO_SNDTIMEO is an option to set a timeout value for output operations.
- It accepts a struct timeval parameter with the number of seconds and mi-
- croseconds used to limit waits for output operations to complete. If a
+ It accepts a struct timeval parameter with the number of seconds and
+ microseconds used to limit waits for output operations to complete. If a
send operation has blocked for this much time, it returns with a partial
count or with the error EWOULDBLOCK if no data was sent. In the current
- implementation, this timer is restarted each time additional data are de-
- livered to the protocol, implying that the limit applies to output por-
+ implementation, this timer is restarted each time additional data are
+ delivered to the protocol, implying that the limit applies to output por-
tions ranging in size from the low water mark to the high water mark for
output. SO_RCVTIMEO is an option to set a timeout value for input opera-
tions. It accepts a struct timeval parameter with the number of seconds
and microseconds used to limit waits for input operations to complete.
In the current implementation, this timer is restarted each time addi-
@@ -3275,51 +3220,49 @@ RETURN VALUES
A 0 is returned if the call succeeds, -1 if it fails.
ERRORS
The call succeeds unless:
- [EBADF] The argument s is not a valid descriptor.
+ [EBADF] The argument s is not a valid descriptor.
- [ENOTSOCK] The argument s is a file, not a socket.
+ [ENOTSOCK] The argument s is a file, not a socket.
- [ENOPROTOOPT]
- The option is unknown at the level indicated.
+ [ENOPROTOOPT] The option is unknown at the level indicated.
- [EFAULT] The address pointed to by optval is not in a valid part of
- the process address space. For getsockopt(), this error
- may also be returned if optlen is not in a valid part of
- the process address space.
+ [EFAULT] The address pointed to by optval is not in a valid
+ part of the process address space. For getsockopt(),
+ this error may also be returned if optlen is not in a
+ valid part of the process address space.
SEE ALSO
- connect(2), ioctl(2), poll(2), select(2), poll(2), socket(2),
- getprotoent(3), protocols(5)
+ connect(2), ioctl(2), poll(2), select(2), poll(2), socket(2),
+ getprotoent(3), protocols(5)
BUGS
Several of the socket options should be handled at lower levels of the
system.
HISTORY
The getsockopt() system call appeared in 4.2BSD.
-BSD Experimental February 15, 1999 3
+BSD February 15, 1999 BSD
</screen>
</sect1>
- <sect1 id="IOCTL">
- <title>IOCTL</title>
+ <sect1 id="net-common-tcpip-manpages-ioctl">
+ <title>ioctl</title>
<screen>
-
-IOCTL(2) System Programmer's Manual IOCTL(2)
+IOCTL(2) System Calls Manual IOCTL(2)
NAME
ioctl - control device
SYNOPSIS
#include <sys/ioctl.h>
int
- ioctl(int d, unsigned long request, ...)
+ ioctl(int d, unsigned long request, ...);
DESCRIPTION
The ioctl() function manipulates the underlying device parameters of spe-
cial files. In particular, many operating characteristics of character
special files (e.g., terminals) may be controlled with ioctl() requests.
@@ -3327,57 +3270,57 @@ DESCRIPTION
The argument d must be an open file descriptor. The third argument is
called arg and contains additional information needed by this device to
perform the requested function. arg is either an int or a pointer to a
device-specific data structure, depending upon the given request.
- An ioctl request has encoded in it whether the argument is an ``in'' pa-
- rameter or ``out'' parameter, and the size of the third argument (arg) in
- bytes. Macros and defines used in specifying an ioctl request are locat-
- ed in the file <sys/ioctl.h>.
+ An ioctl request has encoded in it whether the argument is an ``in''
+ parameter or ``out'' parameter, and the size of the third argument (arg)
+ in bytes. Macros and defines used in specifying an ioctl request are
+ located in the file <sys/ioctl.h>.
RETURN VALUES
If an error has occurred, a value of -1 is returned and errno is set to
indicate the error.
ERRORS
ioctl() will fail if:
- [EBADF] d is not a valid descriptor.
+ [EBADF] d is not a valid descriptor.
- [ENOTTY] d is not associated with a character special device.
+ [ENOTTY] d is not associated with a character special device.
- [ENOTTY] The specified request does not apply to the kind of object
- that the descriptor d references.
+ [ENOTTY] The specified request does not apply to the kind of
+ object that the descriptor d references.
- [EINVAL] request or arg is not valid.
+ [EINVAL] request or arg is not valid.
- [EFAULT] arg points outside the process's allocated address space.
+ [EFAULT] arg points outside the process's allocated address
+ space.
SEE ALSO
- cdio(1), chio(1), mt(1), execve(2), fcntl(2), intro(4), tty(4)
+ cdio(1), chio(1), mt(1), execve(2), fcntl(2), intro(4), tty(4)
HISTORY
An ioctl() function call appeared in Version 7 AT&T UNIX.
-BSD Experimental December 11, 1993 1
+BSD December 11, 1993 BSD
</screen>
</sect1>
- <sect1 id="POLL">
- <title>POLL</title>
+ <sect1 id="net-common-tcpip-manpages-poll">
+ <title>poll</title>
<screen>
-
-POLL(2) System Programmer's Manual POLL(2)
+POLL(2) System Calls Manual POLL(2)
NAME
poll - synchronous I/O multiplexing
SYNOPSIS
#include <poll.h>
int
- poll(struct pollfd *fds, int nfds, int timeout)
+ poll(struct pollfd *fds, int nfds, int timeout);
DESCRIPTION
poll() provides a mechanism for reporting I/O conditions across a set of
file descriptors.
@@ -3397,12 +3340,12 @@ DESCRIPTION
nfds The number of pollfd structures in the array.
timeout Maximum interval to wait for the poll to complete, in millisec-
onds. If this value is 0, then poll() will return immediately.
- If this value is INFTIM (-1), poll() will block indefinitely un-
- til a condition is found.
+ If this value is INFTIM (-1), poll() will block indefinitely
+ until a condition is found.
The calling process sets the events bitmask and poll() sets the revents
bitmask. Each call to poll() resets the revents bitmask for accuracy.
The condition flags in the bitmasks are defined as:
@@ -3427,11 +3370,10 @@ DESCRIPTION
POLLRDBAND Same as POLLIN.
POLLWRNORM Same as POLLOUT.
-
POLLWRBAND Same as POLLOUT.
POLLMSG This flag is not used in this implementation and is provided
only for source code compatibility.
@@ -3442,18 +3384,18 @@ DESCRIPTION
In addition to I/O multiplexing, poll() can be used to generate simple
timeouts. This functionality may be achieved by passing a null pointer
for fds.
WARNINGS
- The POLLHUP flag is only a close approximation and may not always be ac-
- curate.
+ The POLLHUP flag is only a close approximation and may not always be
+ accurate.
RETURN VALUES
- Upon error, poll() returns a -1 and sets the global variable errno to in-
- dicate the error. If the timeout interval was reached before any events
- occurred, a 0 is returned. Otherwise, poll() returns the number of file
- descriptors for which revents is non-zero.
+ Upon error, poll() returns a -1 and sets the global variable errno to
+ indicate the error. If the timeout interval was reached before any
+ events occurred, a 0 is returned. Otherwise, poll() returns the number
+ of file descriptors for which revents is non-zero.
ERRORS
poll() will fail if:
[EINVAL] nfds was either a negative number or greater than the number
@@ -3468,24 +3410,23 @@ ERRORS
to poll() may succeed.
[EINTR] poll() caught a signal during the polling process.
SEE ALSO
- poll(2), select(2), sysconf(3)
+ poll(2), select(2), sysconf(3)
HISTORY
A poll() system call appeared in AT&T System V UNIX.
-BSD Experimental December 13, 1994 2
+BSD December 13, 1994 BSD
</screen>
</sect1>
- <sect1 id="SELECT">
- <title>SELECT</title>
+ <sect1 id="net-common-tcpip-manpages-select">
+ <title>select</title>
<screen>
-
-SELECT(2) System Programmer's Manual SELECT(2)
+SELECT(2) System Calls Manual SELECT(2)
NAME
select - synchronous I/O multiplexing
SYNOPSIS
@@ -3493,19 +3434,19 @@ SYNOPSIS
#include <sys/time.h>
#include <unistd.h>
int
select(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds,
- struct timeval *timeout)
+ struct timeval *timeout);
- FD_SET(fd, &fdset)
+ FD_SET(fd, &fdset);
- FD_CLR(fd, &fdset)
+ FD_CLR(fd, &fdset);
- FD_ISSET(fd, &fdset)
+ FD_ISSET(fd, &fdset);
- FD_ZERO(&fdset)
+ FD_ZERO(&fdset);
DESCRIPTION
select() examines the I/O descriptor sets whose addresses are passed in
readfds, writefds, and exceptfds to see if some of their descriptors are
ready for reading, are ready for writing, or have an exceptional condi-
@@ -3518,12 +3459,12 @@ DESCRIPTION
The descriptor sets are stored as bit fields in arrays of integers. The
following macros are provided for manipulating such descriptor sets:
FD_ZERO(&fdset) initializes a descriptor set fdset to the null set.
FD_SET(fd, &fdset) includes a particular descriptor fd in fdset.
- FD_CLR(fd, &fdset) removes fd from fdset. FD_ISSET(fd, &fdset) is non-ze-
- ro if fd is a member of fdset, zero otherwise. The behavior of these
+ FD_CLR(fd, &fdset) removes fd from fdset. FD_ISSET(fd, &fdset) is non-
+ zero if fd is a member of fdset, zero otherwise. The behavior of these
macros is undefined if a descriptor value is less than zero or greater
than or equal to FD_SETSIZE, which is normally at least equal to the max-
imum number of descriptors supported by the system.
If timeout is a non-null pointer, it specifies a maximum interval to wait
@@ -3536,32 +3477,33 @@ DESCRIPTION
Any of readfds, writefds, and exceptfds may be given as null pointers if
no descriptors are of interest.
RETURN VALUES
select() returns the number of ready descriptors that are contained in
- the descriptor sets, or -1 is an error occurred. If the time limit ex-
- pires, select() returns 0. If select() returns with an error, including
- one due to an interrupted call, the descriptor sets will be unmodified.
+ the descriptor sets, or -1 is an error occurred. If the time limit
+ expires, select() returns 0. If select() returns with an error, includ-
+ ing one due to an interrupted call, the descriptor sets will be unmodi-
+ fied.
ERRORS
An error return from select() indicates:
- [EFAULT] One or more of readfds, writefds, or exceptfds points out-
+ [EFAULT] One or more of readfds, writefds, or exceptfds points
+ outside the process's allocated address space.
- side the process's allocated address space.
+ [EBADF] One of the descriptor sets specified an invalid
+ descriptor.
- [EBADF] One of the descriptor sets specified an invalid descriptor.
+ [EINTR] A signal was delivered before the time limit expired
+ and before any of the selected events occurred.
- [EINTR] A signal was delivered before the time limit expired and
- before any of the selected events occurred.
-
- [EINVAL] The specified time limit is invalid. One of its components
- is negative or too large.
+ [EINVAL] The specified time limit is invalid. One of its com-
+ ponents is negative or too large.
SEE ALSO
- accept(2), connect(2), gettimeofday(2), poll(2), read(2), recv(2),
- send(2), write(2), getdtablesize(3)
+ accept(2), connect(2), gettimeofday(2), poll(2), read(2), recv(2),
+ send(2), write(2), getdtablesize(3)
BUGS
Although the provision of getdtablesize(3) was intended to allow user
programs to be written independent of the kernel limit on the number of
open files, the dimension of a sufficiently large bit field for select
@@ -3569,16 +3511,16 @@ BUGS
FD_SETSIZE (currently 256), but that is somewhat smaller than the current
kernel limit to the number of open files. However, in order to accommo-
date programs which might potentially use a larger number of open files
with select, it is possible to increase this size within a program by
providing a larger definition of FD_SETSIZE before the inclusion of
- <sys/types.h>. The kernel will cope, and the userland libraries provided
+ <sys/types.h>. The kernel will cope, and the userland libraries provided
with the system are also ready for large numbers of file descriptors.
Alternatively, to be really safe, it is possible to allocate fd_set bit-
arrays dynamically. The idea is to permit a program to work properly
- even if it is execve(2)'d with 4000 file descriptors pre-allocated. The
+ even if it is execve(2)'d with 4000 file descriptors pre-allocated. The
following illustrates the technique which is used by userland libraries:
fd_set *fdsr;
int max = fd;
@@ -3598,12 +3540,12 @@ BUGS
large, and for fixed numbers of file descriptors one need not size and
dynamically allocate a memory object.
select() should probably have been designed to return the time remaining
from the original timeout, if any, by modifying the time value in place.
- Even though some systems stupidly act in this different way, it is un-
- likely this semantic will ever be commonly implemented, as the change
+ Even though some systems stupidly act in this different way, it is
+ unlikely this semantic will ever be commonly implemented, as the change
causes massive source code compatibility problems. Furthermore, recent
new standards have dictated the current behaviour. In general, due to
the existence of those brain-damaged non-conforming systems, it is unwise
to assume that the timeout value will be unmodified by the select() call,
and the caller should reinitialize it on each invocation. Calculating
@@ -3615,49 +3557,48 @@ BUGS
see that many daemons are written that way (i.e., httpd(8)).
HISTORY
The select() function call appeared in 4.2BSD.
-BSD Experimental March 25, 1994 3
+BSD March 25, 1994 BSD
</screen>
</sect1>
- <sect1 id="SEND">
- <title>SEND</title>
+ <sect1 id="net-common-tcpip-manpages-send">
+ <title>send</title>
<screen>
-
-SEND(2) System Programmer's Manual SEND(2)
+SEND(2) System Calls Manual SEND(2)
NAME
send, sendto, sendmsg - send a message from a socket
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
ssize_t
- send(int s, const void *msg, size_t len, int flags)
+ send(int s, const void *msg, size_t len, int flags);
ssize_t
sendto(int s, const void *msg, size_t len, int flags,
- const struct sockaddr *to, socklen_t tolen)
+ const struct sockaddr *to, socklen_t tolen);
ssize_t
- sendmsg(int s, const struct msghdr *msg, int flags)
+ sendmsg(int s, const struct msghdr *msg, int flags);
DESCRIPTION
send(), sendto(), and sendmsg() are used to transmit a message to another
socket. send() may be used only when the socket is in a connected state,
while sendto() and sendmsg() may be used at any time.
The address of the target is given by to with tolen specifying its size.
- The length of the message is given by len. If the message is too long to
+ The length of the message is given by len. If the message is too long to
pass atomically through the underlying protocol, the error EMSGSIZE is
returned, and the message is not transmitted.
- No indication of failure to deliver is implicit in a send(). Locally de-
- tected errors are indicated by a return value of -1.
+ No indication of failure to deliver is implicit in a send(). Locally
+ detected errors are indicated by a return value of -1.
If no messages space is available at the socket to hold the message to be
transmitted, then send() normally blocks, unless the socket has been
placed in non-blocking I/O mode. The select(2) or poll(2) system calls
may be used to determine when it is possible to send more data.
@@ -3666,162 +3607,159 @@ DESCRIPTION
#define MSG_OOB 0x1 /* process out-of-band data */
#define MSG_DONTROUTE 0x4 /* bypass routing, use direct interface */
The flag MSG_OOB is used to send ``out-of-band'' data on sockets that
- support this notion (e.g., SOCK_STREAM); the underlying protocol must al-
- so support ``out-of-band'' data. MSG_DONTROUTE is usually used only by
+ support this notion (e.g., SOCK_STREAM); the underlying protocol must
+ also support ``out-of-band'' data. MSG_DONTROUTE is usually used only by
diagnostic or routing programs.
See recv(2) for a description of the msghdr structure.
RETURN VALUES
- The call returns the number of characters sent, or -1 if an error oc-
- curred.
+ The call returns the number of characters sent, or -1 if an error
+ occurred.
ERRORS
send(), sendto(), and sendmsg() fail if:
- [EBADF] An invalid descriptor was specified.
+ [EBADF] An invalid descriptor was specified.
- [ENOTSOCK] The argument s is not a socket.
+ [ENOTSOCK] The argument s is not a socket.
- [EFAULT] An invalid user space address was specified for a parame-
- ter.
+ [EFAULT] An invalid user space address was specified for a
+ parameter.
- [EMSGSIZE] The socket requires that message be sent atomically, and
+ [EMSGSIZE] The socket requires that message be sent atomically,
+ and the size of the message to be sent made this
+ impossible.
- the size of the message to be sent made this impossible.
+ [EAGAIN] The socket is marked non-blocking and the requested
+ operation would block.
- [EAGAIN] The socket is marked non-blocking and the requested opera-
- tion would block.
+ [ENOBUFS] The system was unable to allocate an internal buffer.
+ The operation may succeed when buffers become avail-
+ able.
- [ENOBUFS] The system was unable to allocate an internal buffer. The
- operation may succeed when buffers become available.
+ [ENOBUFS] The output queue for a network interface was full.
+ This generally indicates that the interface has
+ stopped sending, but may be caused by transient con-
+ gestion.
- [ENOBUFS] The output queue for a network interface was full. This
- generally indicates that the interface has stopped sending,
- but may be caused by transient congestion.
+ [EACCES] The SO_BROADCAST option is not set on the socket, and
+ a broadcast address was given as the destination.
- [EACCES] The SO_BROADCAST option is not set on the socket, and a
- broadcast address was given as the destination.
+ [EHOSTUNREACH] The destination address specified an unreachable host.
- [EHOSTUNREACH]
- The destination address specified an unreachable host.
+ [EINVAL] The flags parameter is invalid.
- [EINVAL] The flags parameter is invalid.
+ [EHOSTDOWN] The destination address specified a host that is down.
- [EHOSTDOWN] The destination address specified a host that is down.
+ [ENETDOWN] The destination address specified a network that is
+ down.
- [ENETDOWN] The destination address specified a network that is down.
+ [ECONNREFUSED] The destination host rejected the message (or a previ-
+ ous one). This error can only be returned by con-
+ nected sockets.
- [ECONNREFUSED]
- The destination host rejected the message (or a previous
- one). This error can only be returned by connected sock-
- ets.
+ [ENOPROTOOPT] There was a problem sending the message. This error
+ can only be returned by connected sockets.
- [ENOPROTOOPT]
- There was a problem sending the message. This error can
- only be returned by connected sockets.
+ [EDESTADDRREQ] The socket is not connected, and no destination
+ address was specified.
- [EDESTADDRREQ]
- The socket is not connected, and no destination address was
- specified.
-
- [EISCONN] The socket is already connected, and a destination address
- was specified.
+ [EISCONN] The socket is already connected, and a destination
+ address was specified.
In addition, send() and sendto() may return the following error:
- [EINVAL] len was larger than SSIZE_MAX.
+ [EINVAL] len was larger than SSIZE_MAX.
Also, sendmsg() may return the following errors:
- [EINVAL] The sum of the iov_len values in the msg_iov array over-
- flowed an ssize_t.
+ [EINVAL] The sum of the iov_len values in the msg_iov array
+ overflowed an ssize_t.
- [EMSGSIZE] The msg_iovlen member of msg was less than 0 or larger than
- IOV_MAX.
+ [EMSGSIZE] The msg_iovlen member of msg was less than 0 or larger
+ than IOV_MAX.
- [EAFNOSUPPORT]
- Addresses in the specified address family cannot be used
- with this socket.
+ [EAFNOSUPPORT] Addresses in the specified address family cannot be
+ used with this socket.
SEE ALSO
- fcntl(2), getsockopt(2), poll(2), recv(2), select(2), poll(2),
- socket(2), write(2)
+ fcntl(2), getsockopt(2), poll(2), recv(2), select(2), poll(2), socket(2),
+ write(2)
HISTORY
The send() function call appeared in 4.2BSD.
-BSD Experimental July 28, 1998 2
+BSD July 28, 1998 BSD
</screen>
</sect1>
- <sect1 id="SHUTDOWN">
- <title>SHUTDOWN</title>
+ <sect1 id="net-common-tcpip-manpages-shutdown">
+ <title>shutdown</title>
<screen>
-
-SHUTDOWN(2) System Programmer's Manual SHUTDOWN(2)
+SHUTDOWN(2) System Calls Manual SHUTDOWN(2)
NAME
shutdown - shut down part of a full-duplex connection
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
- shutdown(int s, int how)
+ shutdown(int s, int how);
DESCRIPTION
The shutdown() call causes all or part of a full-duplex connection on the
- socket associated with s to be shut down. If how is SHUT_RD, further re-
- ceives will be disallowed. If how is SHUT_WR, further sends will be dis-
- allowed. If how is SHUT_RDWR, further sends and receives will be disal-
- lowed.
+ socket associated with s to be shut down. If how is SHUT_RD, further
+ receives will be disallowed. If how is SHUT_WR, further sends will be
+ disallowed. If how is SHUT_RDWR, further sends and receives will be dis-
+ allowed.
RETURN VALUES
A 0 is returned if the call succeeds, -1 if it fails.
ERRORS
The call succeeds unless:
- [EINVAL] how is not SHUT_RD, SHUT_WR, or SHUT_RDWR.
+ [EINVAL] how is not SHUT_RD, SHUT_WR, or SHUT_RDWR.
- [EBADF] s is not a valid descriptor.
+ [EBADF] s is not a valid descriptor.
- [ENOTSOCK] s is a file, not a socket.
+ [ENOTSOCK] s is a file, not a socket.
- [ENOTCONN] The specified socket is not connected.
+ [ENOTCONN] The specified socket is not connected.
SEE ALSO
- connect(2), socket(2)
+ connect(2), socket(2)
HISTORY
- The shutdown() function call appeared in 4.2BSD. The how arguments used
- to be simply 0, 1, and 2, but now have named values as specified by .
+ The shutdown() function call appeared in 4.2BSD. The how arguments used
+ to be simply 0, 1, and 2, but now have named values as specified by
+ X/Open Portability Guide Issue 4 (``XPG4'').
-BSD Experimental June 4, 1993 1
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="SOCKET">
- <title>SOCKET</title>
+ <sect1 id="net-common-tcpip-manpages-socket">
+ <title>socket</title>
<screen>
-
-SOCKET(2) System Programmer's Manual SOCKET(2)
+SOCKET(2) System Calls Manual SOCKET(2)
NAME
socket - create an endpoint for communication
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
- socket(int domain, int type, int protocol)
+ socket(int domain, int type, int protocol);
DESCRIPTION
socket() creates an endpoint for communication and returns a descriptor.
The domain parameter specifies a communications domain within which com-
@@ -3845,21 +3783,21 @@ DESCRIPTION
SOCK_RAW
SOCK_SEQPACKET
SOCK_RDM
A SOCK_STREAM type provides sequenced, reliable, two-way connection based
- byte streams. An out-of-band data transmission mechanism may be support-
- ed. A SOCK_DGRAM socket supports datagrams (connectionless, unreliable
- messages of a fixed (typically small) maximum length). A SOCK_SEQPACKET
- socket may provide a sequenced, reliable, two-way connection-based data
- transmission path for datagrams of fixed maximum length; a consumer may
- be required to read an entire packet with each read system call. This
- facility is protocol specific, and presently implemented only for PF_NS.
- SOCK_RAW sockets provide access to internal network protocols and inter-
- faces. The types SOCK_RAW, which is available only to the superuser, and
- SOCK_RDM, which is planned, but not yet implemented, are not described
- here.
+ byte streams. An out-of-band data transmission mechanism may be sup-
+ ported. A SOCK_DGRAM socket supports datagrams (connectionless, unreli-
+ able messages of a fixed (typically small) maximum length). A
+ SOCK_SEQPACKET socket may provide a sequenced, reliable, two-way connec-
+ tion-based data transmission path for datagrams of fixed maximum length;
+ a consumer may be required to read an entire packet with each read system
+ call. This facility is protocol specific, and presently implemented only
+ for PF_NS. SOCK_RAW sockets provide access to internal network protocols
+ and interfaces. The types SOCK_RAW, which is available only to the supe-
+ ruser, and SOCK_RDM, which is planned, but not yet implemented, are not
+ described here.
The protocol specifies a particular protocol to be used with the socket.
Normally only a single protocol exists to support a particular socket
type within a given protocol family. However, it is possible that many
protocols may exist, in which case a particular protocol must be speci-
@@ -3872,143 +3810,141 @@ DESCRIPTION
pipes. A stream socket must be in a connected state before any data may
be sent or received on it. A connection to another socket is created
with a connect(2) call. Once connected, data may be transferred using
read(2) and write(2) calls or some variant of the send(2) and recv(2)
calls. When a session has been completed a close(2) may be performed.
- Out-of-band data may also be transmitted as described in send(2) and re-
- ceived as described in recv(2).
+ Out-of-band data may also be transmitted as described in send(2) and
+ received as described in recv(2).
The communications protocols used to implement a SOCK_STREAM ensure that
data is not lost or duplicated. If a piece of data for which the peer
protocol has buffer space cannot be successfully transmitted within a
reasonable length of time, then the connection is considered broken and
calls will indicate an error with -1 returns and with ETIMEDOUT as the
- specific code in the global variable errno. The protocols optionally keep
- sockets ``warm'' by forcing transmissions roughly every minute in the ab-
- sence of other activity. An error is then indicated if no response can
- be elicited on an otherwise idle connection for a extended period (e.g.,
- 5 minutes). A SIGPIPE signal is raised if a process sends on a broken
- stream; this causes naive processes, which do not handle the signal, to
- exit.
+ specific code in the global variable errno. The protocols optionally
+ keep sockets ``warm'' by forcing transmissions roughly every minute in
+ the absence of other activity. An error is then indicated if no response
+ can be elicited on an otherwise idle connection for a extended period
+ (e.g., 5 minutes). A SIGPIPE signal is raised if a process sends on a
+ broken stream; this causes naive processes, which do not handle the sig-
+ nal, to exit.
SOCK_SEQPACKET sockets employ the same system calls as SOCK_STREAM sock-
ets. The only difference is that read(2) calls will return only the
amount of data requested, and any remaining in the arriving packet will
be discarded.
SOCK_DGRAM and SOCK_RAW sockets allow sending of datagrams to correspon-
dents named in send(2) calls. Datagrams are generally received with
- recvfrom(2), which returns the next datagram with its return address.
+ recvfrom(2), which returns the next datagram with its return address.
An fcntl(2) call can be used to specify a process group to receive a
SIGURG signal when the out-of-band data arrives. It may also enable non-
blocking I/O and asynchronous notification of I/O events via SIGIO.
- The operation of sockets is controlled by socket level options. These op-
- tions are defined in the file <sys/socket.h>. setsockopt(2) and getsock-
- opt(2) are used to set and get options, respectively.
+ The operation of sockets is controlled by socket level options. These
+ options are defined in the file <sys/socket.h>. setsockopt(2) and
+ getsockopt(2) are used to set and get options, respectively.
RETURN VALUES
- A -1 is returned if an error occurs, otherwise the return value is a de-
- scriptor referencing the socket.
+ A -1 is returned if an error occurs, otherwise the return value is a
+ descriptor referencing the socket.
ERRORS
The socket() call fails if:
- [EPROTONOSUPPORT]
- The protocol type or the specified protocol is not support-
- ed within this domain.
+ [EPROTONOSUPPORT] The protocol type or the specified protocol is not
+ supported within this domain.
- [EMFILE] The per-process descriptor table is full.
+ [EMFILE] The per-process descriptor table is full.
- [ENFILE] The system file table is full.
+ [ENFILE] The system file table is full.
- [EACCES] Permission to create a socket of the specified type and/or
- protocol is denied.
+ [EACCES] Permission to create a socket of the specified type
+ and/or protocol is denied.
- [ENOBUFS] Insufficient buffer space is available. The socket cannot
- be created until sufficient resources are freed.
+ [ENOBUFS] Insufficient buffer space is available. The socket
+ cannot be created until sufficient resources are
+ freed.
SEE ALSO
- accept(2), bind(2), connect(2), getsockname(2), getsockopt(2),
- ioctl(2), listen(2), poll(2), read(2), recv(2), select(2), send(2),
- setsockopt(2), shutdown(2), socketpair(2), write(2), getprotoent(3),
- netintro(4)
+ accept(2), bind(2), connect(2), getsockname(2), getsockopt(2), ioctl(2),
+ listen(2), poll(2), read(2), recv(2), select(2), send(2), setsockopt(2),
+ shutdown(2), socketpair(2), write(2), getprotoent(3), netintro(4)
An Introductory 4.3 BSD Interprocess Communication Tutorial, reprinted in
UNIX Programmer's Supplementary Documents Volume 1.
BSD Interprocess Communication Tutorial, reprinted in UNIX Programmer's
Supplementary Documents Volume 1.
HISTORY
The socket() function call appeared in 4.2BSD.
-BSD Experimental June 4, 1993 3
+BSD June 4, 1993 BSD
</screen>
</sect1>
- <sect1 id="SOCKETPAIR">
- <title>SOCKETPAIR</title>
+ <sect1 id="net-common-tcpip-manpages-socketpair">
+ <title>socketpair</title>
<screen>
-
-SOCKETPAIR(2) System Programmer's Manual SOCKETPAIR(2)
+SOCKETPAIR(2) System Calls Manual SOCKETPAIR(2)
NAME
socketpair - create a pair of connected sockets
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
int
- socketpair(int d, int type, int protocol, int *sv)
+ socketpair(int d, int type, int protocol, int *sv);
DESCRIPTION
The socketpair() call creates an unnamed pair of connected sockets in the
specified domain d, of the specified type, and using the optionally spec-
- ified protocol. The descriptors used in referencing the new sockets are
- returned in sv[0] and sv[1]. The two sockets are indistinguishable.
+ ified protocol. The descriptors used in referencing the new sockets are
+ returned in sv[0] and sv[1]. The two sockets are indistinguishable.
RETURN VALUES
A 0 is returned if the call succeeds, -1 if it fails.
ERRORS
The call succeeds unless:
- [EMFILE] Too many descriptors are in use by this process.
+ [EMFILE] Too many descriptors are in use by this process.
- [EAFNOSUPPORT]
- The specified address family is not supported on this ma-
- chine.
+ [EAFNOSUPPORT] The specified address family is not supported on this
+ machine.
- [EPROTONOSUPPORT]
- The specified protocol is not supported on this machine.
+ [EPROTONOSUPPORT] The specified protocol is not supported on this
+ machine.
- [EOPNOTSUPP] The specified protocol does not support creation of socket
- pairs.
+ [EOPNOTSUPP] The specified protocol does not support creation of
+ socket pairs.
- [EFAULT] The address sv does not specify a valid part of the process
- address space.
+ [EFAULT] The address sv does not specify a valid part of the
+ process address space.
- [ENFILE] The system file table is full.
+ [ENFILE] The system file table is full.
SEE ALSO
- pipe(2), read(2), write(2)
+ pipe(2), read(2), write(2)
BUGS
This call is currently implemented only for the LOCAL domain. Many oper-
ating systems only accept a protocol of PF_UNSPEC, so that should be used
instead of PF_LOCAL for maximal portability.
STANDARDS
- The socketpair() function conforms to .
+ The socketpair() function conforms to X/Open Portability Guide Issue 4.2
+ (``XPG4.2'').
HISTORY
The socketpair() function call appeared in 4.2BSD.
-BSD Experimental June 4, 1993 1
+BSD June 4, 1993 BSD
</screen>
</sect1>
</chapter>
Index: packages/net/ftpclient/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/ftpclient/current/ChangeLog,v
retrieving revision 1.5
diff -u -5 -p -r1.5 ChangeLog
--- packages/net/ftpclient/current/ChangeLog 7 Aug 2002 08:00:33 -0000 1.5
+++ packages/net/ftpclient/current/ChangeLog 24 Feb 2003 06:47:05 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/ftpclient.cdl: Add doc link.
+
2002-08-06 Andrew Lunn <andrew dot lunn at ascom dot ch>
* src/ftpclient.c: Send "quit" not "quit " to keep some servers
happy. Also deal with multi line replies correctly.
Index: packages/net/ftpclient/current/cdl/ftpclient.cdl
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/ftpclient/current/cdl/ftpclient.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 ftpclient.cdl
--- packages/net/ftpclient/current/cdl/ftpclient.cdl 23 May 2002 23:08:03 -0000 1.3
+++ packages/net/ftpclient/current/cdl/ftpclient.cdl 24 Feb 2003 06:47:05 -0000
@@ -64,10 +64,11 @@ cdl_package CYGPKG_NET_FTPCLIENT {
requires CYGPKG_NET
description "
FTP client support. Provides ftp_put and ftp_get to put a file
onto a remote FTP server and get a file from a remote server.
Only binary more is supported."
+ doc ref/net-ftpclient.html
compile ftpclient.c
cdl_component CYGPKG_NET_FTPCLIENT_OPTIONS {
display "FTP client build options"
Index: packages/net/httpd/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/httpd/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/net/httpd/current/ChangeLog 14 Feb 2003 02:27:35 -0000 1.2
+++ packages/net/httpd/current/ChangeLog 24 Feb 2003 06:47:05 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/httpd.cdl: Add doc link.
+
2003-02-14 Bob Koninckx <bob dot koninckx at mech dot kuleuven dot ac dot be>
* include/httpd.h (html_end): fix typo.
2002-12-06 Nick Garnett <nickg at ecoscentric dot com>
Index: packages/net/httpd/current/cdl/httpd.cdl
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/httpd/current/cdl/httpd.cdl,v
retrieving revision 1.1
diff -u -5 -p -r1.1 httpd.cdl
--- packages/net/httpd/current/cdl/httpd.cdl 22 Dec 2002 11:09:01 -0000 1.1
+++ packages/net/httpd/current/cdl/httpd.cdl 24 Feb 2003 06:47:05 -0000
@@ -48,11 +48,11 @@
# ====================================================================
cdl_package CYGPKG_HTTPD {
display "HTTP Daemon"
parent CYGPKG_NET
-# doc doc/index.html
+ doc ref/net-httpd.html
include_dir cyg/httpd
requires CYGPKG_IO
requires { 0 != CYGINT_ISO_STDLIB_STRCONV }
requires { 0 != CYGINT_ISO_STDIO_FORMATTED_IO }
requires { 0 != CYGINT_ISO_STRING_STRFUNCS }
Index: packages/net/ns/dns/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/ns/dns/current/ChangeLog,v
retrieving revision 1.11
diff -u -5 -p -r1.11 ChangeLog
--- packages/net/ns/dns/current/ChangeLog 22 Jan 2003 06:39:19 -0000 1.11
+++ packages/net/ns/dns/current/ChangeLog 24 Feb 2003 06:47:05 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/dns.cdl: Add doc link.
+
2003-01-22 Jonathan Larmour <jifl at eCosCentric dot com>
* doc/dns.sgml: Use correct (and working!) docbook.
2003-01-18 Jonathan Larmour <jifl at eCosCentric dot com>
Index: packages/net/ns/dns/current/cdl/dns.cdl
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/ns/dns/current/cdl/dns.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 dns.cdl
--- packages/net/ns/dns/current/cdl/dns.cdl 18 Jan 2003 03:47:03 -0000 1.5
+++ packages/net/ns/dns/current/cdl/dns.cdl 24 Feb 2003 06:47:05 -0000
@@ -51,10 +51,11 @@
# ====================================================================
cdl_package CYGPKG_NS_DNS {
display "DNS client"
include_dir cyg/ns/dns
+ doc ref/net-ns-dns.html
cdl_option CYGPKG_NS_DNS_BUILD {
display "Build DNS NS client package"
default_value 1
implements CYGINT_ISO_DNS
Index: packages/net/snmp/agent/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos-opt/snmp/agent/current/ChangeLog,v
retrieving revision 1.23
diff -u -5 -p -r1.23 ChangeLog
--- packages/net/snmp/agent/current/ChangeLog 14 Feb 2003 18:28:49 -0000 1.23
+++ packages/net/snmp/agent/current/ChangeLog 24 Feb 2003 06:47:06 -0000
@@ -1,5 +1,12 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/snmpagent.cdl: Add doc link.
+
+ * doc/prepare-manpages.sh: Generate namespaced IDs, without shouting.
+ * doc/snmp-manpages.sgml: Regenerated.
+
2003-02-14 Jonathan Larmour <jifl at eCosCentric dot com>
* cdl/snmpagent.cdl: Explicitly require OpenBSD stack since we don't
work with the FreeBSD stack yet.
Index: packages/net/snmp/agent/current/cdl/snmpagent.cdl
===================================================================
RCS file: /cvs/ecos/ecos-opt/snmp/agent/current/cdl/snmpagent.cdl,v
retrieving revision 1.8
diff -u -5 -p -r1.8 snmpagent.cdl
--- packages/net/snmp/agent/current/cdl/snmpagent.cdl 14 Feb 2003 18:28:49 -0000 1.8
+++ packages/net/snmp/agent/current/cdl/snmpagent.cdl 24 Feb 2003 06:47:06 -0000
@@ -50,11 +50,11 @@
# ====================================================================
cdl_package CYGPKG_SNMPAGENT {
display "SNMP agent"
parent CYGPKG_NET
-# doc doc/index.html
+ doc ref/net-snmp-ecos-port.html
include_dir ucd-snmp
requires CYGPKG_IO
requires { 0 != CYGINT_ISO_STRING_STRFUNCS }
requires { 0 != CYGINT_ISO_STDLIB_STRCONV }
requires { 0 != CYGINT_ISO_STDIO_FORMATTED_IO }
Index: packages/net/snmp/agent/current/doc/prepare-manpages.sh
===================================================================
RCS file: /cvs/ecos/ecos-opt/snmp/agent/current/doc/prepare-manpages.sh,v
retrieving revision 1.1
diff -u -5 -p -r1.1 prepare-manpages.sh
--- packages/net/snmp/agent/current/doc/prepare-manpages.sh 3 Feb 2003 16:34:45 -0000 1.1
+++ packages/net/snmp/agent/current/doc/prepare-manpages.sh 24 Feb 2003 06:47:07 -0000
@@ -18,15 +18,15 @@ echo >> snmp-manpages.sgml
for manpage in $MANPAGE_LIST
do
echo "processing $manpage"
# get the title for this section
- manpage_title=`egrep '^\.TH' $manpage | awk '{print $2}'`
+ manpage_title=`egrep '^\.TH' $manpage | awk '{print $2}' | tr 'A-Z' 'a-z'`
# note that _ is illegal in an id, so we canonicalize it to -
docbook_section_id=`echo $manpage_title | sed 's/_/-/g'`
# now prepare out a section and title
- echo " <sect1 id=\"$docbook_section_id\">" >> snmp-manpages.sgml
+ echo " <sect1 id=\"net-snmp-agent-manpages-$docbook_section_id\">" >> snmp-manpages.sgml
echo " <title>$manpage_title</title>" >> snmp-manpages.sgml
# we make it <screen> so that it is a monospaced font
echo " <screen>" >> snmp-manpages.sgml
# now put the contents into this section
Index: packages/net/snmp/agent/current/doc/snmp-manpages.sgml
===================================================================
RCS file: /cvs/ecos/ecos-opt/snmp/agent/current/doc/snmp-manpages.sgml,v
retrieving revision 1.1
diff -u -5 -p -r1.1 snmp-manpages.sgml
--- packages/net/snmp/agent/current/doc/snmp-manpages.sgml 3 Feb 2003 16:34:45 -0000 1.1
+++ packages/net/snmp/agent/current/doc/snmp-manpages.sgml 24 Feb 2003 06:47:07 -0000
@@ -2,12 +2,12 @@
<!-- this file is automatically generated by the script -->
<!-- ./prepare-manpages.sh -->
<!-- so PLEASE do not modify it: your changes will be lost -->
- <sect1 id="SNMPD.CONF">
- <title>SNMPD.CONF</title>
+ <sect1 id="net-snmp-agent-manpages-snmpd.conf">
+ <title>snmpd.conf</title>
<screen>
SNMPD.CONF(5) SNMPD.CONF(5)
Index: packages/net/snmp/agent/current/doc/snmp.sgml
===================================================================
RCS file: /cvs/ecos/ecos-opt/snmp/agent/current/doc/snmp.sgml,v
retrieving revision 1.5
diff -u -5 -p -r1.5 snmp.sgml
--- packages/net/snmp/agent/current/doc/snmp.sgml 14 Feb 2003 18:28:49 -0000 1.5
+++ packages/net/snmp/agent/current/doc/snmp.sgml 24 Feb 2003 06:47:07 -0000
@@ -300,11 +300,11 @@ in the usual way as with the standard UC
</SECT2>
<SECT2 id="Traps">
<TITLE>Traps</TITLE>
<PARA>
The support of the <LITERAL>trapsink</LITERAL> command in the
-<link linkend="SNMPD.CONF">snmpd.conf</link> file is not tested
+<link linkend="net-snmp-agent-manpages-snmpd.conf">snmpd.conf</link> file is not tested
and there may be problems for it working as expected. Moreover, in systems that do not
have filesystem support, there is no way to configure a trap-session in the
conventional way.
</PARA>
<PARA>
@@ -344,11 +344,11 @@ if (trapsink.ip != 0) {
Using snmpd.conf requires the inclusion of one of the file-system packages
(eg. CYGPKG_RAMFS) and CYGPKG_FILEIO. With these two packages included, the
SNMP sub-system will read the snmpd.conf file from the location specified in
<LITERAL>SNMPCONFPATH</LITERAL>, or the standard builtin locations, and use
these profiles. Only the profiles specified in the <LITERAL>ACCESS-CONTROL</LITERAL>
-section of <link linkend="SNMPD.CONF">snmpd.conf</link> file have
+section of <link linkend="net-snmp-agent-manpages-snmpd.conf">snmpd.conf</link> file have
been tested and shown to work. Other profiles which have been implemented in
<LITERAL>UCD-SNMP-4.1.2</LITERAL>'s <LITERAL>snmpd.conf</LITERAL> may not work
because the sole purpose of adding support for the snmpd.conf file has been to
set up <LITERAL>ACCESS-CONTROL</LITERAL> models.
</PARA>
Index: packages/net/snmp/lib/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos-opt/snmp/lib/current/ChangeLog,v
retrieving revision 1.9
diff -u -5 -p -r1.9 ChangeLog
--- packages/net/snmp/lib/current/ChangeLog 3 Feb 2003 16:34:45 -0000 1.9
+++ packages/net/snmp/lib/current/ChangeLog 24 Feb 2003 06:47:07 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/snmplib.cdl: Add doc link.
+
2003-02-03 Manu Sharma <manu dot sharma at ascom dot com>
* include/transform_oids.h,
* src/keytools.c,
* src/lcd_time.c,
Index: packages/net/snmp/lib/current/cdl/snmplib.cdl
===================================================================
RCS file: /cvs/ecos/ecos-opt/snmp/lib/current/cdl/snmplib.cdl,v
retrieving revision 1.5
diff -u -5 -p -r1.5 snmplib.cdl
--- packages/net/snmp/lib/current/cdl/snmplib.cdl 3 Feb 2003 16:34:46 -0000 1.5
+++ packages/net/snmp/lib/current/cdl/snmplib.cdl 24 Feb 2003 06:47:07 -0000
@@ -50,11 +50,11 @@
# ====================================================================
cdl_package CYGPKG_SNMPLIB {
display "SNMP library"
parent CYGPKG_NET
-# doc doc/index.html
+ doc ref/net-snmp-ecos-port.html
include_dir ucd-snmp
requires CYGPKG_IO
requires { 0 != CYGINT_ISO_STRING_STRFUNCS }
requires { 0 != CYGINT_ISO_STRING_MEMFUNCS }
requires { 0 != CYGINT_ISO_STDLIB_STRCONV }
Index: packages/net/tcpip/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/tcpip/current/ChangeLog,v
retrieving revision 1.42
diff -u -5 -p -r1.42 ChangeLog
--- packages/net/tcpip/current/ChangeLog 30 Jan 2003 15:38:02 -0000 1.42
+++ packages/net/tcpip/current/ChangeLog 24 Feb 2003 06:47:09 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/openbsd_net.cdl: Improve doc links.
+
2003-01-30 Jonathan Larmour <jifl at eCosCentric dot com>
* src/sys/net/if_bridge.c (bridge_input): Learn source host addr,
not dest host addr.
Fix pointed to by Daniel Néri.
Index: packages/net/tcpip/current/cdl/openbsd_net.cdl
===================================================================
RCS file: /cvs/ecos/ecos-opt/net/net/tcpip/current/cdl/openbsd_net.cdl,v
retrieving revision 1.1
diff -u -5 -p -r1.1 openbsd_net.cdl
--- packages/net/tcpip/current/cdl/openbsd_net.cdl 20 May 2002 22:25:15 -0000 1.1
+++ packages/net/tcpip/current/cdl/openbsd_net.cdl 24 Feb 2003 06:47:09 -0000
@@ -27,11 +27,11 @@
# ====================================================================
cdl_package CYGPKG_NET_OPENBSD_STACK {
display "OpenBSD TCP/IP Stack"
parent CYGPKG_NET
- doc doc/index.html
+ doc ref/tcpip-openbsd.html
include_dir .
requires CYGPKG_IO
requires CYGPKG_ISOINFRA
requires CYGINT_ISO_C_TIME_TYPES
requires CYGINT_ISO_STRERROR
Index: packages/pkgconf/rules.doc
===================================================================
RCS file: /cvs/ecos/ecos/packages/pkgconf/rules.doc,v
retrieving revision 1.6
diff -u -5 -p -r1.6 rules.doc
--- packages/pkgconf/rules.doc 18 Oct 2002 01:46:15 -0000 1.6
+++ packages/pkgconf/rules.doc 24 Feb 2003 06:47:09 -0000
@@ -51,11 +51,11 @@
# OTHER_SGML - any other .sgml files accessed from main
# PICTURES - referenced by the SGML files
#####DESCRIPTIONEND####
#=============================================================================
-.PHONY: default check html pdf clean
+.PHONY: default check html pdf clean copyfiles
# Locations of the stylesheets and other SGML support files. These
# have moved around in various releases of the tools.
ifneq (,$(wildcard /usr/share/sgml/docbook))
CATALOG := /etc/sgml/catalog
@@ -97,20 +97,28 @@ PNGS :=$(foreach x,$(PICTURES),$(x).png)
convert -crop 0x0 $< $@
%.eps: %.fig
convert -crop 0x0 $< $@
+# This is a little grotty. In some cases we want to just copy files from
+# their source location to the destination's current dir and nothing
+# more.
+copyfiles:
+ifneq (,$(COPYFILES))
+ cp $(COPYFILES) .
+endif
+
default: check
# Validating an sgml document can be achieved with
check: $(MAIN_SGML) $(OTHER_SGML) $(GIFS) $(EPS)
nsgmls -vs -c $(CATALOG) $<
# Generating HTML from the SGML. In practice multiple .html files may
# be generated, but for the purposes of dependency analysis the others
# can be ignored.
-html: $(MAIN_HTML)
+html: copyfiles $(MAIN_HTML)
$(MAIN_HTML): $(MAIN_SGML) $(OTHER_SGML) $(GIFS) $(ECOS_STYLESHEET) $(FIXHTML)
jade -t sgml -i html -c $(DSSSL_CATALOG) -d $(ECOS_STYLESHEET)#html $<
tclsh $(FIXHTML)
Index: packages/redboot/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/redboot/current/ChangeLog,v
retrieving revision 1.91
diff -u -5 -p -r1.91 ChangeLog
--- packages/redboot/current/ChangeLog 14 Feb 2003 16:31:39 -0000 1.91
+++ packages/redboot/current/ChangeLog 24 Feb 2003 06:47:11 -0000
@@ -1,5 +1,11 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * doc/redboot.sgml: De-vendorise a little.
+
+ * cdl/redboot.cdl: Add doc links.
+
2003-02-14 Jonathan Larmour <jifl at eCosCentric dot com>
* cdl/redboot.cdl: Put virtually all options inside
CYGBLD_BUILD_REDBOOT. And indent accordingly.
Index: packages/redboot/current/cdl/redboot.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/redboot/current/cdl/redboot.cdl,v
retrieving revision 1.44
diff -u -5 -p -r1.44 redboot.cdl
--- packages/redboot/current/cdl/redboot.cdl 14 Feb 2003 02:49:06 -0000 1.44
+++ packages/redboot/current/cdl/redboot.cdl 24 Feb 2003 06:47:12 -0000
@@ -49,10 +49,11 @@
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_REDBOOT {
display "Redboot ROM monitor"
+ doc ref/redboot.html
define_header redboot.h
description "
This package supports the Redboot \[stand-alone debug monitor\]
using eCos as the underlying board support mechanism."
@@ -136,48 +137,55 @@ cdl_package CYGPKG_REDBOOT {
compile decompress.c
}
cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
display "Include support for xyzModem downloads"
+ doc ref/download-command.html
no_define
default_value 1
implements CYGINT_REDBOOT_LOAD_METHOD
compile -library=libextras.a xyzModem.c
}
cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
display "Include POSIX checksum command"
+ doc ref/cksum-command.html
default_value 1
compile -library=libextras.a cksum.c
}
cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
display "Include memory fill command"
+ doc ref/mfill-command.html
default_value 1
compile -library=libextras.a mfill.c
}
cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
display "Include memory compare command"
+ doc ref/mcmp-command.html
default_value 1
compile -library=libextras.a mcmp.c
}
cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
display "Include memory dump command"
+ doc ref/dump-command.html
default_value 1
compile -library=libextras.a dump.c
}
cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
display "Include cache command"
+ doc ref/cache-command.html
default_value 1
compile -library=libextras.a caches.c
}
cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
display "Include exec command"
+ doc ref/exec-command.html
default_value 1
# Implemented within the platform HAL
}
no_define
@@ -461,10 +469,11 @@ cdl_package CYGPKG_REDBOOT {
}
cdl_option CYGOPT_REDBOOT_FIS {
display "RedBoot Flash Image System support"
default_value 1
+ doc ref/flash-image-system.html
description "
This option enables the Flash Image System commands
and support within RedBoot. If disabled, simple Flash
access commands such as \"fis write\" will still exist.
This option would be disabled for targets that need simple
@@ -747,10 +756,11 @@ cdl_package CYGPKG_REDBOOT {
}
}
cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
display "Boot scripting"
+ doc ref/persistent-state-flash.html
flavor none
no_define
description "
This contains options related to RedBoot's boot script
functionality."
Index: packages/redboot/current/doc/redboot.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/redboot/current/doc/redboot.sgml,v
retrieving revision 1.4
diff -u -5 -p -r1.4 redboot.sgml
--- packages/redboot/current/doc/redboot.sgml 15 Sep 2002 21:45:31 -0000 1.4
+++ packages/redboot/current/doc/redboot.sgml 24 Feb 2003 06:47:12 -0000
@@ -85,16 +85,10 @@ system should refer to the <emphasis>Get
document, which provides information about the portability and extendability
of RedBoot in an eCos environment.</para>
<sect1 id="redboot-on-the-web">
<title>More information about RedBoot on the web</title>
<para>
-Information about the RedBoot product, including information about
-details of porting,
-customization, training and technical support services from Red Hat, is
-available from the
-<ulink url="http://www.redhat.com/embedded/technologies/redboot/";>RedBoot
-Product web site</ulink>. </para>
<para>The <ulink url="http://sources.redhat.com/redboot/";>RedBoot Net
Distribution web site</ulink> contains downloadable sources and documentation
for all publically released targets, including the latest features and updates.
</para>
</sect1>
Index: packages/services/cpuload/current/cdl/cpuload.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/cpuload/current/cdl/cpuload.cdl,v
retrieving revision 1.3
diff -u -5 -p -r1.3 cpuload.cdl
--- packages/services/cpuload/current/cdl/cpuload.cdl 21 Feb 2003 00:08:17 -0000 1.3
+++ packages/services/cpuload/current/cdl/cpuload.cdl 24 Feb 2003 06:47:12 -0000
@@ -59,10 +59,11 @@ cdl_package CYGPKG_CPULOAD {
description "
This package measures the CPU load over the last 100ms, 1second
and 10 second. All loads are returned as a percentage, ie 0-100.
This is only a rough measure. Any clever power management, sleep
modes etc, will cause these results to be wrong."
+ doc ref/services-cpuload.html
cdl_option CYGPKG_CPULOAD_TESTS {
display "CPU load measurement tests"
flavor data
no_define
Index: packages/services/crc/current/cdl/crc.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/crc/current/cdl/crc.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 crc.cdl
--- packages/services/crc/current/cdl/crc.cdl 21 Feb 2003 00:08:23 -0000 1.2
+++ packages/services/crc/current/cdl/crc.cdl 24 Feb 2003 06:47:12 -0000
@@ -50,10 +50,11 @@
# ====================================================================
cdl_package CYGPKG_CRC {
display "Compute CRCs"
include_dir cyg/crc
+ doc ref/services-crc.html
compile posix_crc.c crc16.c crc32.c
description "
This package provides support for CRC calculation. Currently
this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
Index: packages/services/gfx/mw/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/gfx/mw/current/ChangeLog,v
retrieving revision 1.1
diff -u -5 -p -r1.1 ChangeLog
--- packages/services/gfx/mw/current/ChangeLog 20 May 2002 22:25:28 -0000 1.1
+++ packages/services/gfx/mw/current/ChangeLog 24 Feb 2003 06:47:13 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/microwindows.cdl: There's no docs so don't supply CDL.
+
2002-04-30 Bart Veer <bartv at redhat dot com>
* cdl/microwindows.cdl:
Replace description properties with display properties.
Index: packages/services/gfx/mw/current/cdl/microwindows.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/gfx/mw/current/cdl/microwindows.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 microwindows.cdl
--- packages/services/gfx/mw/current/cdl/microwindows.cdl 23 May 2002 23:08:37 -0000 1.2
+++ packages/services/gfx/mw/current/cdl/microwindows.cdl 24 Feb 2003 06:47:13 -0000
@@ -49,11 +49,10 @@
#
# ====================================================================
cdl_package CYGPKG_MICROWINDOWS {
display "MicroWindows"
- doc doc/index.html
requires CYGPKG_POSIX
requires CYGPKG_ISOINFRA
requires CYGINT_ISO_C_TIME_TYPES
requires CYGINT_ISO_STRERROR
requires CYGINT_ISO_ERRNO
Index: packages/services/power/common/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/power/common/current/ChangeLog,v
retrieving revision 1.2
diff -u -5 -p -r1.2 ChangeLog
--- packages/services/power/common/current/ChangeLog 23 May 2002 23:08:46 -0000 1.2
+++ packages/services/power/common/current/ChangeLog 24 Feb 2003 06:47:13 -0000
@@ -1,5 +1,12 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/power.cdl: Fix doc links for config tool's doc system.
+
+ * doc/power.sgml: Comment out DOCTYPE for now to allow building
+ with standard doc build.
+
2001-11-21 Jonathan Larmour <jlarmour at redhat dot com>
* include/power.h: Use a POWER_INLINE macro for "inline" to allow
non-inline versions to be defined when the C compiler chooses not to
inline.
Index: packages/services/power/common/current/cdl/power.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/power/common/current/cdl/power.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 power.cdl
--- packages/services/power/common/current/cdl/power.cdl 23 May 2002 23:08:46 -0000 1.2
+++ packages/services/power/common/current/cdl/power.cdl 24 Feb 2003 06:47:13 -0000
@@ -49,19 +49,19 @@
#
# ====================================================================
cdl_package CYGPKG_POWER {
display "Generic power management support"
- doc services-power.html
+ doc ref/services-power.html
parent CYGPKG_IO
include_dir "cyg/power"
compile power.cxx
compile -library=libextras.a power_data.cxx
cdl_option CYGIMP_POWER_PROVIDE_STRINGS {
display "Provide a string for every power controller"
- doc power-info.html#POWER-MANAGEMENT-INFO_IDS
+ doc ref/power-info.html#POWER-MANAGEMENT-INFO_IDS
default_value 1
description "
Optionally each power controller can contain a string identifying
the hardware or functionality it is associated with. This string
is not required by the generic power management, but may be
@@ -70,11 +70,11 @@ cdl_package CYGPKG_POWER {
"
}
cdl_option CYGIMP_POWER_PROVIDE_POLICY_DATA {
display "Reserve space in each power controller for use by the policy manager"
- doc power-policy.html#POWER-POLICY-DATA
+ doc ref/power-policy.html#POWER-POLICY-DATA
default_value 1
description "
Optionally each power controller can provide a word of data
for use by the policy manager, for example to store a pointer
to some data structure controlled by the policy manager. If
@@ -83,11 +83,11 @@ cdl_package CYGPKG_POWER {
"
}
cdl_component CYGPKG_POWER_THREAD {
display "Run a separate thread within the power management package"
- doc power-intro.html#POWER-INTRO-OPERATION
+ doc ref/power-intro.html#POWER-INTRO-OPERATION
active_if CYGPKG_KERNEL
default_value 1
description "
Optionally the power management code can run in its own thread. This
can be useful if state changes can be requested from any code,
Index: packages/services/power/common/current/doc/power.sgml
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/power/common/current/doc/power.sgml,v
retrieving revision 1.3
diff -u -5 -p -r1.3 power.sgml
--- packages/services/power/common/current/doc/power.sgml 15 Sep 2002 21:45:59 -0000 1.3
+++ packages/services/power/common/current/doc/power.sgml 24 Feb 2003 06:47:15 -0000
@@ -1,6 +1,6 @@
-<!DOCTYPE reference PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!-- DOCTYPE reference PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
Index: packages/services/profile/gprof/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/profile/gprof/current/ChangeLog,v
retrieving revision 1.4
diff -u -5 -p -r1.4 ChangeLog
--- packages/services/profile/gprof/current/ChangeLog 15 Nov 2002 18:36:26 -0000 1.4
+++ packages/services/profile/gprof/current/ChangeLog 24 Feb 2003 06:47:15 -0000
@@ -1,5 +1,9 @@
+2003-02-24 Jonathan Larmour <jifl at eCosCentric dot com>
+
+ * cdl/profile_gprof.cdl: Add doc link.
+
2002-11-15 Gary Thomas <gthomas at ecoscentric dot com>
* include/gmon_out.h: Import non-GPL version from OpenBSD.
* doc/profile.sgml: Improve description of host/client and
Index: packages/services/profile/gprof/current/cdl/profile_gprof.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/profile/gprof/current/cdl/profile_gprof.cdl,v
retrieving revision 1.2
diff -u -5 -p -r1.2 profile_gprof.cdl
--- packages/services/profile/gprof/current/cdl/profile_gprof.cdl 15 Nov 2002 15:03:50 -0000 1.2
+++ packages/services/profile/gprof/current/cdl/profile_gprof.cdl 24 Feb 2003 06:47:15 -0000
@@ -53,10 +53,11 @@ cdl_package CYGPKG_PROFILE_GPROF {
display "Gather runtime profile statistics"
requires CYGPKG_NET
requires CYGPKG_NET_TFTP
requires CYGPKG_MEMALLOC
requires { CYGINT_PROFILE_HAL_TIMER != 0 }
+ doc ref/services-profile-gprof.html
include_dir cyg/profile
compile profile.c