This is the mail archive of the
ecos-patches@sources.redhat.com
mailing list for the eCos project.
Re: hi gary I have a question about fis create/write fail Err
- From: Gary Thomas <gary at mlbassoc dot com>
- To: eCos patches <ecos-patches at ecos dot sourceware dot org>
- Date: 18 Dec 2003 06:51:58 -0700
- Subject: Re: hi gary I have a question about fis create/write fail Err
- Organization: MLB Associates
- References: <7523689.1071745035385.JavaMail.weblogic@ep_app14> <1071754481.17911.1559.camel@hermes>
Oops - wrong list :-(
On Thu, 2003-12-18 at 06:34, Gary Thomas wrote:
> Note: this question really belongs on the eCos discussion list.
> Private email/support is only available under contract.
>
> On Thu, 2003-12-18 at 03:57, ëìë wrote:
> > hi gray
> > My name is jeong-rok park
> > I am glad ti know you
> > I am a novice in embedded linux
> > I met some problem that fis create can't work
> > so I searched ecos-discuss and found same problem mailing
> > list(Very strange: fis create/write fail Err= 92)
> > and in the the last mail list
> > you said about the patch to make fis work
> >
> > I was so happy to find the answer.
> > but I could'nt find the patch
> >
> > please let me know the answer or where can I find patch
>
> This is a hardware error (I can't tell exactly since you did
> not specify the chip type, etc). Most likely is that the
> device or blocks in question are locked. If your FIS supports
> the unlock command, try that first:
> RedBoot> fis unlock -f START_ADDR -l LENGTH
> where START_ADDR and LENGTH match the address and length of
> the image you are trying to create.
>
> Good luck.
--
Gary Thomas <gary@mlbassoc.com>
MLB Associates