This is the mail archive of the
ecos-patches@sources.redhat.com
mailing list for the eCos project.
Zlib upgrade to v1.2.3
- From: Peter Korsgaard <jacmet at sunsite dot dk>
- To: ecos-patches at ecos dot sourceware dot org
- Date: Fri, 29 Jul 2005 07:42:40 +0200
- Subject: Zlib upgrade to v1.2.3
Hi,
This patch upgrades the zlib package to version 1.2.3.
Version 1.2.3 fixes a potential security vulnerability. From the
change log:
* Eliminate a potential security vulnerability when decoding invalid
compressed data
* Eliminate a potential security vulnerability when decoding
specially crafted compressed data
* Fix a bug when decompressing dynamic blocks with no distance codes
* Fix crc check bug in gzread() after gzungetc()
* Do not return an error when using gzread() on an empty file
Index: packages/services/compress/zlib/current/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/ChangeLog,v
retrieving revision 1.14
diff -u -r1.14 ChangeLog
--- packages/services/compress/zlib/current/ChangeLog 29 Jun 2005 19:36:40 -0000 1.14
+++ packages/services/compress/zlib/current/ChangeLog 28 Jul 2005 07:17:54 -0000
@@ -1,3 +1,33 @@
+2005-07-27 Peter Korsgaard <jacmet@sunsite.dk>
+
+ * src/ChangeLog:
+ * src/configure:
+ * src/deflate.c:
+ * src/deflate.h:
+ * src/FAQ:
+ * src/gzio.c:
+ * src/Make_vms.com:
+ * src/adler32.c:
+ * src/compress.c:
+ * src/example.c:
+ * src/minigzip.c:
+ * src/infback.c:
+ * src/inffast.c:
+ * src/inflate.c:
+ * src/inflate.h:
+ * src/inftrees.c:
+ * src/inftrees.h:
+ * src/Makefile:
+ * src/Makefile.in:
+ * src/README:
+ * src/README.eCos:
+ * src/trees.c:
+ * src/zlib.3:
+ * src/zutil.c:
+ * src/zutil.h:
+ * include/zlib.h:
+ * include/zconf.h: Upgrade to zlib-1.2.3
+
2005-06-28 Peter Korsgaard <jacmet@sunsite.dk>
* src/ChangeLog:
Index: packages/services/compress/zlib/current/include/zconf.h
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/include/zconf.h,v
retrieving revision 1.7
diff -u -r1.7 zconf.h
--- packages/services/compress/zlib/current/include/zconf.h 29 Jun 2005 19:36:41 -0000 1.7
+++ packages/services/compress/zlib/current/include/zconf.h 28 Jul 2005 07:17:54 -0000
@@ -1,5 +1,5 @@
/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2004 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -60,6 +60,10 @@
# define get_crc_table z_get_crc_table
# define zError z_zError
+# define alloc_func z_alloc_func
+# define free_func z_free_func
+# define in_func z_in_func
+# define out_func z_out_func
# define Byte z_Byte
# define uInt z_uInt
# define uLong z_uLong
@@ -81,8 +85,10 @@
#if defined(_WINDOWS) && !defined(WINDOWS)
# define WINDOWS
#endif
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-# define WIN32
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
#endif
#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
Index: packages/services/compress/zlib/current/include/zlib.h
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/include/zlib.h,v
retrieving revision 1.5
diff -u -r1.5 zlib.h
--- packages/services/compress/zlib/current/include/zlib.h 29 Jun 2005 19:36:41 -0000 1.5
+++ packages/services/compress/zlib/current/include/zlib.h 28 Jul 2005 07:17:55 -0000
@@ -1,7 +1,7 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.2, October 3rd, 2004
+ version 1.2.3, July 18th, 2005
- Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler
+ Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@@ -37,8 +37,8 @@
extern "C" {
#endif
-#define ZLIB_VERSION "1.2.2"
-#define ZLIB_VERNUM 0x1220
+#define ZLIB_VERSION "1.2.3"
+#define ZLIB_VERNUM 0x1230
/*
The 'zlib' compression library provides in-memory compression and
@@ -95,7 +95,7 @@
free_func zfree; /* used to free the internal state */
voidpf opaque; /* private data object passed to zalloc and zfree */
- int data_type; /* best guess about the data type: ascii or binary */
+ int data_type; /* best guess about the data type: binary or text */
uLong adler; /* adler32 value of the uncompressed data */
uLong reserved; /* reserved for future use */
} z_stream;
@@ -103,6 +103,29 @@
typedef z_stream FAR *z_streamp;
/*
+ gzip header information passed to and from zlib routines. See RFC 1952
+ for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+ int text; /* true if compressed data believed to be text */
+ uLong time; /* modification time */
+ int xflags; /* extra flags (not used when writing a gzip file) */
+ int os; /* operating system */
+ Bytef *extra; /* pointer to extra field or Z_NULL if none */
+ uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
+ uInt extra_max; /* space at extra (only when reading header) */
+ Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
+ uInt name_max; /* space at name (only when reading header) */
+ Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
+ uInt comm_max; /* space at comment (only when reading header) */
+ int hcrc; /* true if there was or will be a header crc */
+ int done; /* true when done reading gzip header (not used
+ when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
The application must update next_in and avail_in when avail_in has
dropped to zero. It must update next_out and avail_out when avail_out
has dropped to zero. The application must initialize zalloc, zfree and
@@ -166,11 +189,13 @@
#define Z_FILTERED 1
#define Z_HUFFMAN_ONLY 2
#define Z_RLE 3
+#define Z_FIXED 4
#define Z_DEFAULT_STRATEGY 0
/* compression strategy; see deflateInit2() below for details */
#define Z_BINARY 0
-#define Z_ASCII 1
+#define Z_TEXT 1
+#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
#define Z_UNKNOWN 2
/* Possible values of the data_type field (though see inflate()) */
@@ -244,6 +269,10 @@
and with zero avail_out, it must be called again after making room in the
output buffer because there might be more output pending.
+ Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+ decide how much data to accumualte before producing output, in order to
+ maximize compression.
+
If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
flushed to the output buffer and the output is aligned on a byte boundary, so
that the decompressor can get all input data available so far. (In particular
@@ -255,7 +284,7 @@
Z_SYNC_FLUSH, and the compression state is reset so that decompression can
restart from this point if previous compressed data has been damaged or if
random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
- the compression.
+ compression.
If deflate returns with avail_out == 0, this function must be called again
with the same value of the flush parameter and more output space (updated
@@ -280,8 +309,8 @@
deflate() sets strm->adler to the adler32 checksum of all input read
so far (that is, total_in bytes).
- deflate() may update data_type if it can make a good guess about
- the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+ deflate() may update strm->data_type if it can make a good guess about
+ the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
binary. This field is only for information purposes and does not affect
the compression algorithm in any manner.
@@ -363,11 +392,11 @@
The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
output as possible to the output buffer. Z_BLOCK requests that inflate() stop
- if and when it get to the next deflate block boundary. When decoding the zlib
- or gzip format, this will cause inflate() to return immediately after the
- header and before the first block. When doing a raw inflate, inflate() will
- go ahead and process the first block, and will return when it gets to the end
- of that block, or when it runs out of data.
+ if and when it gets to the next deflate block boundary. When decoding the
+ zlib or gzip format, this will cause inflate() to return immediately after
+ the header and before the first block. When doing a raw inflate, inflate()
+ will go ahead and process the first block, and will return when it gets to
+ the end of that block, or when it runs out of data.
The Z_BLOCK option assists in appending to or combining deflate streams.
Also to assist in this, on return inflate() will set strm->data_type to the
@@ -496,7 +525,9 @@
Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as
Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy
parameter only affects the compression ratio but not the correctness of the
- compressed output even if it is not set appropriately.
+ compressed output even if it is not set appropriately. Z_FIXED prevents the
+ use of dynamic Huffman codes, allowing for a simpler decoder for special
+ applications.
deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
@@ -525,7 +556,9 @@
deflateInit or deflateInit2, a part of the dictionary may in effect be
discarded, for example if the dictionary is larger than the window size in
deflate or deflate2. Thus the strings most likely to be useful should be
- put at the end of the dictionary, not at the front.
+ put at the end of the dictionary, not at the front. In addition, the
+ current implementation of deflate will use at most the window size minus
+ 262 bytes of the provided dictionary.
Upon return of this function, strm->adler is set to the adler32 value
of the dictionary; the decompressor may later use this value to determine
@@ -591,6 +624,23 @@
if strm->avail_out was zero.
*/
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+ int good_length,
+ int max_lazy,
+ int nice_length,
+ int max_chain));
+/*
+ Fine tune deflate's internal compression parameters. This should only be
+ used by someone who understands the algorithm used by zlib's deflate for
+ searching for the best matching string, and even then only by the most
+ fanatic optimizer trying to squeeze out the last compressed bit for their
+ specific input data. Read the deflate.c source code for the meaning of the
+ max_lazy, good_length, nice_length, and max_chain parameters.
+
+ deflateTune() can be called after deflateInit() or deflateInit2(), and
+ returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
uLong sourceLen));
/*
@@ -616,6 +666,30 @@
stream state was inconsistent.
*/
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ deflateSetHeader() provides gzip header information for when a gzip
+ stream is requested by deflateInit2(). deflateSetHeader() may be called
+ after deflateInit2() or deflateReset() and before the first call of
+ deflate(). The text, time, os, extra field, name, and comment information
+ in the provided gz_header structure are written to the gzip header (xflag is
+ ignored -- the extra flags are set according to the compression level). The
+ caller must assure that, if not Z_NULL, name and comment are terminated with
+ a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+ available there. If hcrc is true, a gzip header crc is included. Note that
+ the current versions of the command-line version of gzip (up through version
+ 1.3.x) do not support header crc's, and will report that it is a "multi-part
+ gzip file" and give up.
+
+ If deflateSetHeader is not used, the default gzip header has text false,
+ the time set to zero, and os set to 255, with no extra, name, or comment
+ fields. The gzip header is returned to the default state by deflateReset().
+
+ deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
/*
ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
int windowBits));
@@ -648,15 +722,15 @@
windowBits can also be greater than 15 for optional gzip decoding. Add
32 to windowBits to enable zlib and gzip decoding with automatic header
detection, or add 16 to decode only the gzip format (the zlib format will
- return a Z_DATA_ERROR. If a gzip stream is being decoded, strm->adler is
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is
a crc32 instead of an adler32.
inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
- memLevel). msg is set to null if there is no error message. inflateInit2
- does not perform any decompression apart from reading the zlib header if
- present: this will be done by inflate(). (So next_in and avail_in may be
- modified, but next_out and avail_out are unchanged.)
+ memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
+ is set to null if there is no error message. inflateInit2 does not perform
+ any decompression apart from reading the zlib header if present: this will
+ be done by inflate(). (So next_in and avail_in may be modified, but next_out
+ and avail_out are unchanged.)
*/
ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
@@ -664,11 +738,14 @@
uInt dictLength));
/*
Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of inflate
- if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
- can be determined from the adler32 value returned by this call of
- inflate. The compressor and decompressor must use exactly the same
- dictionary (see deflateSetDictionary).
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the adler32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called
+ immediately after inflateInit2() or inflateReset() and before any call of
+ inflate() to set the dictionary. The application must insure that the
+ dictionary that was used for compression is provided.
inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
parameter is invalid (such as NULL dictionary) or the stream state is
@@ -719,8 +796,64 @@
stream state was inconsistent (such as zalloc or state being NULL).
*/
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ gz_headerp head));
/*
-ZEXTERN int ZEXPORT inflateBackInit OF((z_stream FAR *strm, int windowBits,
+ inflateGetHeader() requests that gzip header information be stored in the
+ provided gz_header structure. inflateGetHeader() may be called after
+ inflateInit2() or inflateReset(), and before the first call of inflate().
+ As inflate() processes the gzip stream, head->done is zero until the header
+ is completed, at which time head->done is set to one. If a zlib stream is
+ being decoded, then head->done is set to -1 to indicate that there will be
+ no gzip header information forthcoming. Note that Z_BLOCK can be used to
+ force inflate() to return immediately after header processing is complete
+ and before any actual data is decompressed.
+
+ The text, time, xflags, and os fields are filled in with the gzip header
+ contents. hcrc is set to true if there is a header CRC. (The header CRC
+ was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+ contains the maximum number of bytes to write to extra. Once done is true,
+ extra_len contains the actual extra field length, and extra contains the
+ extra field, or that field truncated if extra_max is less than extra_len.
+ If name is not Z_NULL, then up to name_max characters are written there,
+ terminated with a zero unless the length is greater than name_max. If
+ comment is not Z_NULL, then up to comm_max characters are written there,
+ terminated with a zero unless the length is greater than comm_max. When
+ any of extra, name, or comment are not Z_NULL and the respective field is
+ not present in the header, then that field is set to Z_NULL to signal its
+ absence. This allows the use of deflateSetHeader() with the returned
+ structure to duplicate the header. However if those fields are set to
+ allocated memory, then the application will need to save those pointers
+ elsewhere so that they can be eventually freed.
+
+ If inflateGetHeader is not used, then the header information is simply
+ discarded. The header is always checked for validity, including the header
+ CRC if present. inflateReset() will reset the process to discard the header
+ information. The application would need to call inflateGetHeader() again to
+ retrieve the header from the next gzip stream.
+
+ inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
unsigned char FAR *window));
Initialize the internal stream state for decompression using inflateBack()
@@ -744,7 +877,7 @@
typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
-ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm,
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
in_func in, void FAR *in_desc,
out_func out, void FAR *out_desc));
/*
@@ -813,7 +946,7 @@
that inflateBack() cannot return Z_OK.
*/
-ZEXTERN int ZEXPORT inflateBackEnd OF((z_stream FAR *strm));
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
/*
All memory allocated by inflateBackInit() is freed.
@@ -1087,6 +1220,12 @@
input stream, otherwise zero.
*/
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+ Returns 1 if file is being read directly without decompression, otherwise
+ zero.
+*/
+
ZEXTERN int ZEXPORT gzclose OF((gzFile file));
/*
Flushes all pending output if necessary, closes the compressed file
@@ -1119,7 +1258,6 @@
*/
ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
/*
Update a running Adler-32 checksum with the bytes buf[0..len-1] and
return the updated checksum. If buf is NULL, this function returns
@@ -1136,12 +1274,21 @@
*/
#ifndef __ECOS__
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+ z_off_t len2));
+/*
+ Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
+ and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+ each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
+ seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+*/
+
ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
/*
- Update a running crc with the bytes buf[0..len-1] and return the updated
- crc. If buf is NULL, this function returns the required initial value
- for the crc. Pre- and post-conditioning (one's complement) is performed
- within this function so it shouldn't be done by the application.
+ Update a running CRC-32 with the bytes buf[0..len-1] and return the
+ updated CRC-32. If buf is NULL, this function returns the required initial
+ value for the for the crc. Pre- and post-conditioning (one's complement) is
+ performed within this function so it shouldn't be done by the application.
Usage example:
uLong crc = crc32(0L, Z_NULL, 0);
@@ -1185,6 +1332,16 @@
inflateBackInit_((strm), (windowBits), (window), \
ZLIB_VERSION, sizeof(z_stream))
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+/*
+ Combine two CRC-32 check values into one. For two sequences of bytes,
+ seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+ calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
+ check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+ len2.
+*/
+
#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
struct internal_state {int dummy;}; /* hack for buggy compilers */
Index: packages/services/compress/zlib/current/src/ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/ChangeLog,v
retrieving revision 1.4
diff -u -r1.4 ChangeLog
--- packages/services/compress/zlib/current/src/ChangeLog 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/ChangeLog 28 Jul 2005 07:17:55 -0000
@@ -1,6 +1,97 @@
ChangeLog file for zlib
Changes in 1.2.2 (3 October 2004)
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+ compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Added zran.c example of compressed data random access to examples
+ directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+ ENOUGH and MAXD -- this repairs a possible security vulnerability for
+ invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for
+ discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+ avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+ fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+ and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
- Update zlib.h comments on gzip in-memory processing
- Set adler to 1 in inflateReset() to support Java test suite [Walles]
- Add contrib/dotzlib [Ravn]
@@ -448,7 +539,7 @@
Changes in 1.0.6 (19 Jan 1998)
- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occuring only with compression level 0 (thanks to
+- Fix a deflate bug occurring only with compression level 0 (thanks to
Andy Buckler for finding this one).
- In minigzip, pass transparently also the first byte for .Z files.
- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
Index: packages/services/compress/zlib/current/src/FAQ
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/FAQ,v
retrieving revision 1.4
diff -u -r1.4 FAQ
--- packages/services/compress/zlib/current/src/FAQ 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/FAQ 28 Jul 2005 07:17:55 -0000
@@ -148,13 +148,6 @@
format using deflateInit2(). You can also request that inflate decode
the gzip format using inflateInit2(). Read zlib.h for more details.
- Note that you cannot specify special gzip header contents (e.g. a file
- name or modification date), nor will inflate tell you what was in the
- gzip header. If you need to customize the header or see what's in it,
- you can use the raw deflate and inflate operations and the crc32()
- function and roll your own gzip encoding and decoding. Read the gzip
- RFC 1952 for details of the header and trailer format.
-
21. Is zlib thread-safe?
Yes. However any library routines that zlib uses and any application-
@@ -295,20 +288,29 @@
were downright silly. So now, we simply make sure that the code always
works.
-36. Will zlib read the (insert any ancient or arcane format here) compressed
+36. Valgrind (or some similar memory access checker) says that deflate is
+ performing a conditional jump that depends on an uninitialized value.
+ Isn't that a bug?
+
+ No. That is intentional for performance reasons, and the output of
+ deflate is not affected. This only started showing up recently since
+ zlib 1.2.x uses malloc() by default for allocations, whereas earlier
+ versions used calloc(), which zeros out the allocated memory.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
data format?
Probably not. Look in the comp.compression FAQ for pointers to various
formats and associated software.
-37. How can I encrypt/decrypt zip files with zlib?
+38. How can I encrypt/decrypt zip files with zlib?
zlib doesn't support encryption. The original PKZIP encryption is very weak
and can be broken with freely available programs. To get strong encryption,
use GnuPG, http://www.gnupg.org/ , which already includes zlib compression.
For PKZIP compatible "encryption", look at http://www.info-zip.org/
-38. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
"gzip" is the gzip format, and "deflate" is the zlib format. They should
probably have called the second one "zlib" instead to avoid confusion
@@ -324,14 +326,14 @@
Bottom line: use the gzip format for HTTP 1.1 encoding.
-39. Does zlib support the new "Deflate64" format introduced by PKWare?
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
No. PKWare has apparently decided to keep that format proprietary, since
they have not documented it as they have previous compression formats.
In any case, the compression improvements are so modest compared to other
more modern approaches, that it's not worth the effort to implement.
-40. Can you please sign these lengthy legal documents and fax them back to us
+41. Can you please sign these lengthy legal documents and fax them back to us
so that we can use your software in our product?
No. Go away. Shoo.
Index: packages/services/compress/zlib/current/src/Make_vms.com
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/Make_vms.com,v
retrieving revision 1.1
diff -u -r1.1 Make_vms.com
--- packages/services/compress/zlib/current/src/Make_vms.com 6 Apr 2001 17:20:41 -0000 1.1
+++ packages/services/compress/zlib/current/src/Make_vms.com 28 Jul 2005 07:17:55 -0000
@@ -1,30 +1,69 @@
-$! make libz under VMS
-$! written by Martin P.J. Zinser <m.zinser@gsi.de>
+$! make libz under VMS written by
+$! Martin P.J. Zinser
+$! <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
+$!
+$ on error then goto err_exit
+$!
+$!
+$! Just some general constants...
+$!
+$ true = 1
+$ false = 0
+$ tmpnam = "temp_" + f$getjpi("","pid")
+$ SAY = "WRITE SYS$OUTPUT"
+$!
+$! Setup variables holding "config" information
+$!
+$ Make = ""
+$ name = "Zlib"
+$ version = "?.?.?"
+$ v_string = "ZLIB_VERSION"
+$ v_file = "zlib.h"
+$ ccopt = ""
+$ lopts = ""
+$ linkonly = false
+$ optfile = name + ".opt"
+$ its_decc = false
+$ its_vaxc = false
+$ its_gnuc = false
+$ axp = f$getsyi("HW_MODEL").ge.1024
+$ s_case = false
+$! Check for MMK/MMS
+$!
+$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$!
+$!
+$ gosub find_version
+$!
+$ gosub check_opts
$!
$! Look for the compiler used
$!
-$ ccopt = ""
-$ if f$getsyi("HW_MODEL").ge.1024
+$ gosub check_compiler
+$ if its_decc
$ then
-$ ccopt = "/prefix=all"+ccopt
-$ comp = "__decc__=1"
-$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ else
-$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
+$ ccopt = "/prefix=all" + ccopt
+$ if f$trnlnm("SYS") .eqs. ""
$ then
-$ comp = "__vaxc__=1"
+$ if axp
+$ then
+$ define sys sys$library:
+$ else
+$ ccopt = "/decc" + ccopt
+$ define sys decc$library_include:
+$ endif
+$ endif
+$ endif
+$ if its_vaxc .or. its_gnuc
+$ then
$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ else
-$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include:
-$ ccopt = "/decc/prefix=all"+ccopt
-$ comp = "__decc__=1"
-$ endif
$ endif
$!
$! Build the thing plain or with mms
$!
$ write sys$output "Compiling Zlib sources ..."
-$ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
+$ if make.eqs.""
$ then
$ dele example.obj;*,minigzip.obj;*
$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
@@ -37,18 +76,14 @@
deflate.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
gzio.c zutil.h zlib.h zconf.h
-$ CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
- infblock.c zutil.h zlib.h zconf.h infblock.h
-$ CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -
- infcodes.c zutil.h zlib.h zconf.h inftrees.h
+$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
+ infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
inffast.c zutil.h zlib.h zconf.h inffast.h
$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
inflate.c zutil.h zlib.h zconf.h infblock.h
$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
inftrees.c zutil.h zlib.h zconf.h inftrees.h
-$ CALL MAKE infutil.OBJ "CC ''CCOPT' infutil" -
- infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
trees.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
@@ -61,17 +96,45 @@
$ CALL MAKE example.OBJ "CC ''CCOPT' example" -
example.c zlib.h zconf.h
$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$ write sys$output "Building minigzip..."
-$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
+$ if f$search("x11vms:xvmsutils.olb") .nes. ""
+$ then
+$ write sys$output "Building minigzip..."
+$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
minigzip.c zlib.h zconf.h
-$ call make minigzip.exe -
- "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
+$ call make minigzip.exe -
+ "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
minigzip.obj libz.olb
+$ endif
$ else
-$ mms/macro=('comp')
+$ gosub crea_mms
+$ SAY "Make ''name' ''version' with ''Make' "
+$ 'make'
$ endif
+$!
+$! Alpha gets a shareable image
+$!
+$ If axp
+$ Then
+$ gosub crea_olist
+$ write sys$output "Creating libzshr.exe"
+$ call anal_obj_axp modules.opt _link.opt
+$ if s_case
+$ then
+$ open/append optf modules.opt
+$ write optf "case_sensitive=YES"
+$ close optf
+$ endif
+$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt
+$ endif
$ write sys$output "Zlib build completed"
$ exit
+$CC_ERR:
+$ write sys$output "C compiler required to build ''name'"
+$ goto err_exit
+$ERR_EXIT:
+$ set message/facil/ident/sever/text
+$ write sys$output "Exiting..."
+$ exit 2
$!
$!
$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
@@ -113,3 +176,286 @@
$Exit:
$ If V Then Set Verify
$ENDSUBROUTINE
+$!------------------------------------------------------------------------------
+$!
+$! Check command line options and set symbols accordingly
+$!
+$ CHECK_OPTS:
+$ i = 1
+$ OPT_LOOP:
+$ if i .lt. 9
+$ then
+$ cparm = f$edit(p'i',"upcase")
+$ if cparm .eqs. "DEBUG"
+$ then
+$ ccopt = ccopt + "/noopt/deb"
+$ lopts = lopts + "/deb"
+$ endif
+$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ ccopt = ccopt + f$extract(start,len,cparm)
+$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
+ then s_case = true
+$ endif
+$ if cparm .eqs. "LINK" then linkonly = true
+$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ lopts = lopts + f$extract(start,len,cparm)
+$ endif
+$ if f$locate("CC=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ cc_com = f$extract(start,len,cparm)
+ if (cc_com .nes. "DECC") .and. -
+ (cc_com .nes. "VAXC") .and. -
+ (cc_com .nes. "GNUC")
+$ then
+$ write sys$output "Unsupported compiler choice ''cc_com' ignored"
+$ write sys$output "Use DECC, VAXC, or GNUC instead"
+$ else
+$ if cc_com .eqs. "DECC" then its_decc = true
+$ if cc_com .eqs. "VAXC" then its_vaxc = true
+$ if cc_com .eqs. "GNUC" then its_gnuc = true
+$ endif
+$ endif
+$ if f$locate("MAKE=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ mmks = f$extract(start,len,cparm)
+$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
+$ then
+$ make = mmks
+$ else
+$ write sys$output "Unsupported make choice ''mmks' ignored"
+$ write sys$output "Use MMK or MMS instead"
+$ endif
+$ endif
+$ i = i + 1
+$ goto opt_loop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Look for the compiler used
+$!
+$CHECK_COMPILER:
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then
+$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
+$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
+$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
+$ endif
+$!
+$! Exit if no compiler available
+$!
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then goto CC_ERR
+$ else
+$ if its_decc then write sys$output "CC compiler check ... Compaq C"
+$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
+$ if its_gnuc then write sys$output "CC compiler check ... GNU C"
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! If MMS/MMK are available dump out the descrip.mms if required
+$!
+$CREA_MMS:
+$ write sys$output "Creating descrip.mms..."
+$ create descrip.mms
+$ open/append out descrip.mms
+$ copy sys$input: out
+$ deck
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser
+# <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj, infback.obj\
+ deflate.obj, trees.obj, zutil.obj, inflate.obj, \
+ inftrees.obj, inffast.obj
+
+$ eod
+$ write out "CFLAGS=", ccopt
+$ write out "LOPTS=", lopts
+$ copy sys$input: out
+$ deck
+
+all : example.exe minigzip.exe libz.olb
+ @ write sys$output " Example applications available"
+
+libz.olb : libz.olb($(OBJS))
+ @ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+ link $(LOPTS) example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+ link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+
+clean :
+ delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
+
+
+# Other dependencies.
+adler32.obj : adler32.c zutil.h zlib.h zconf.h
+compress.obj : compress.c zlib.h zconf.h
+crc32.obj : crc32.c zutil.h zlib.h zconf.h
+deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h
+example.obj : example.c zlib.h zconf.h
+gzio.obj : gzio.c zutil.h zlib.h zconf.h
+inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
+inflate.obj : inflate.c zutil.h zlib.h zconf.h
+inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
+minigzip.obj : minigzip.c zlib.h zconf.h
+trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : uncompr.c zlib.h zconf.h
+zutil.obj : zutil.c zutil.h zlib.h zconf.h
+infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
+$ eod
+$ close out
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Read list of core library sources from makefile.in and create options
+$! needed to build shareable image
+$!
+$CREA_OLIST:
+$ open/read min makefile.in
+$ open/write mod modules.opt
+$ src_check = "OBJS ="
+$MRLOOP:
+$ read/end=mrdone min rec
+$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop
+$ rec = rec - src_check
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone
+$MRSLOOP:
+$ read/end=mrdone min rec
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
+$MRDONE:
+$ close min
+$ close mod
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Take record extracted in crea_olist and split it into single filenames
+$!
+$EXTRA_FILNAM:
+$ myrec = f$edit(rec - "\", "trim,compress")
+$ i = 0
+$FELOOP:
+$ srcfil = f$element(i," ", myrec)
+$ if (srcfil .nes. " ")
+$ then
+$ write mod f$parse(srcfil,,,"NAME"), ".obj"
+$ i = i + 1
+$ goto feloop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Find current Zlib version number
+$!
+$FIND_VERSION:
+$ open/read h_in 'v_file'
+$hloop:
+$ read/end=hdone h_in rec
+$ rec = f$edit(rec,"TRIM")
+$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
+$ rec = f$edit(rec - "#", "TRIM")
+$ if f$element(0," ",rec) .nes. "define" then goto hloop
+$ if f$element(1," ",rec) .eqs. v_string
+$ then
+$ version = 'f$element(2," ",rec)'
+$ goto hdone
+$ endif
+$ goto hloop
+$hdone:
+$ close h_in
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
+$! information to build a symbol vector for a shareable image
+$! All the "brains" of this logic was suggested by Hartmut Becker
+$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me
+$! (zinser@decus.de), so if you do have problem reports please do not
+$! bother Hartmut/HP, but get in touch with me
+$!
+$ ANAL_OBJ_AXP: Subroutine
+$ V = 'F$Verify(0)
+$ SAY := "WRITE_ SYS$OUTPUT"
+$
+$ IF F$SEARCH("''P1'") .EQS. ""
+$ THEN
+$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
+$ goto exit_aa
+$ ENDIF
+$ IF "''P2'" .EQS. ""
+$ THEN
+$ SAY "ANAL_OBJ_AXP: Error, no output file provided"
+$ goto exit_aa
+$ ENDIF
+$
+$ open/read in 'p1
+$ create a.tmp
+$ open/append atmp a.tmp
+$ loop:
+$ read/end=end_loop in line
+$ f= f$search(line)
+$ if f .eqs. ""
+$ then
+$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
+$ goto loop
+$ endif
+$ define/user sys$output nl:
+$ define/user sys$error nl:
+$ anal/obj/gsd 'f /out=x.tmp
+$ open/read xtmp x.tmp
+$ XLOOP:
+$ read/end=end_xloop xtmp xline
+$ xline = f$edit(xline,"compress")
+$ write atmp xline
+$ goto xloop
+$ END_XLOOP:
+$ close xtmp
+$ goto loop
+$ end_loop:
+$ close in
+$ close atmp
+$ if f$search("a.tmp") .eqs. "" -
+ then $ exit
+$ ! all global definitions
+$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
+$ ! all procedures
+$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
+$ search c.tmp "symbol:"/out=d.tmp
+$ define/user sys$output nl:
+$ edito/edt/command=sys$input d.tmp
+sub/symbol: "/symbol_vector=(/whole
+sub/"/=PROCEDURE)/whole
+exit
+$ ! all data
+$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
+$ search e.tmp "symbol:"/out=f.tmp
+$ define/user sys$output nl:
+$ edito/edt/command=sys$input f.tmp
+sub/symbol: "/symbol_vector=(/whole
+sub/"/=DATA)/whole
+exit
+$ sort/nodupl d.tmp,f.tmp 'p2'
+$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
+$ if f$search("x.tmp") .nes. "" -
+ then $ delete x.tmp;*
+$!
+$ EXIT_AA:
+$ if V then set verify
+$ endsubroutine
+$!------------------------------------------------------------------------------
Index: packages/services/compress/zlib/current/src/Makefile
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/Makefile,v
retrieving revision 1.4
diff -u -r1.4 Makefile
--- packages/services/compress/zlib/current/src/Makefile 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/Makefile 28 Jul 2005 07:17:55 -0000
@@ -1,5 +1,5 @@
# Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2005 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
@@ -30,7 +30,7 @@
LIBS=libz.a
SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.2
+SHAREDLIBV=libz.so.1.2.3
SHAREDLIBM=libz.so.1
AR=ar rc
Index: packages/services/compress/zlib/current/src/Makefile.in
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/Makefile.in,v
retrieving revision 1.4
diff -u -r1.4 Makefile.in
--- packages/services/compress/zlib/current/src/Makefile.in 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/Makefile.in 28 Jul 2005 07:17:55 -0000
@@ -1,5 +1,5 @@
# Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2005 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
@@ -30,7 +30,7 @@
LIBS=libz.a
SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.2
+SHAREDLIBV=libz.so.1.2.3
SHAREDLIBM=libz.so.1
AR=ar rc
Index: packages/services/compress/zlib/current/src/README
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/README,v
retrieving revision 1.4
diff -u -r1.4 README
--- packages/services/compress/zlib/current/src/README 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/README 28 Jul 2005 07:17:55 -0000
@@ -1,6 +1,6 @@
ZLIB DATA COMPRESSION LIBRARY
-zlib 1.2.2 is a general purpose data compression library. All the code is
+zlib 1.2.3 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -16,9 +16,8 @@
To compile all files and run the test program, follow the instructions given at
the top of Makefile. In short "make test; make install" should work for most
-machines. For Unix: "./configure; make test; make install" For MSDOS, use one
-of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or
-descrip.mms.
+machines. For Unix: "./configure; make test; make install". For MSDOS, use one
+of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.
Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
<info@winimage.com> for the Windows DLL version. The zlib home page is
@@ -34,7 +33,7 @@
issue of Dr. Dobb's Journal; a copy of the article is available in
http://dogma.net/markn/articles/zlibtool/zlibtool.htm
-The changes made in version 1.2.2 are documented in the file ChangeLog.
+The changes made in version 1.2.3 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory "contrib".
Index: packages/services/compress/zlib/current/src/README.eCos
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/README.eCos,v
retrieving revision 1.4
diff -u -r1.4 README.eCos
--- packages/services/compress/zlib/current/src/README.eCos 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/README.eCos 28 Jul 2005 07:17:55 -0000
@@ -1,5 +1,5 @@
See the main site http://www.gzip.org/zlib/ for places to download the
-complete sources. Currently based on zlib-1.2.2
+complete sources. Currently based on zlib-1.2.3
Note that these are not the complete zlib sources - the following
directories have been deleted since they are irrelevant for the
Index: packages/services/compress/zlib/current/src/adler32.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/adler32.c,v
retrieving revision 1.3
diff -u -r1.3 adler32.c
--- packages/services/compress/zlib/current/src/adler32.c 24 May 2004 19:33:35 -0000 1.3
+++ packages/services/compress/zlib/current/src/adler32.c 28 Jul 2005 07:17:55 -0000
@@ -1,5 +1,5 @@
/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2004 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -16,12 +16,13 @@
#define NMAX 5552
/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-#define DO1(buf,i) {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
#define DO16(buf) DO8(buf,0); DO8(buf,8);
+/* use NO_DIVIDE if your processor does not do division in hardware */
#ifdef NO_DIVIDE
# define MOD(a) \
do { \
@@ -43,8 +44,17 @@
if (a >= (BASE << 1)) a -= (BASE << 1); \
if (a >= BASE) a -= BASE; \
} while (0)
+# define MOD4(a) \
+ do { \
+ if (a >= (BASE << 4)) a -= (BASE << 4); \
+ if (a >= (BASE << 3)) a -= (BASE << 3); \
+ if (a >= (BASE << 2)) a -= (BASE << 2); \
+ if (a >= (BASE << 1)) a -= (BASE << 1); \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
#else
# define MOD(a) a %= BASE
+# define MOD4(a) a %= BASE
#endif
/* ========================================================================= */
@@ -53,26 +63,91 @@
const Bytef *buf;
uInt len;
{
- unsigned long s1 = adler & 0xffff;
- unsigned long s2 = (adler >> 16) & 0xffff;
- int k;
-
- if (buf == Z_NULL) return 1L;
-
- while (len > 0) {
- k = len < NMAX ? (int)len : NMAX;
- len -= k;
- while (k >= 16) {
+ unsigned long sum2;
+ unsigned n;
+
+ /* split Adler-32 into component sums */
+ sum2 = (adler >> 16) & 0xffff;
+ adler &= 0xffff;
+
+ /* in case user likes doing a byte at a time, keep it fast */
+ if (len == 1) {
+ adler += buf[0];
+ if (adler >= BASE)
+ adler -= BASE;
+ sum2 += adler;
+ if (sum2 >= BASE)
+ sum2 -= BASE;
+ return adler | (sum2 << 16);
+ }
+
+ /* initial Adler-32 value (deferred check for len == 1 speed) */
+ if (buf == Z_NULL)
+ return 1L;
+
+ /* in case short lengths are provided, keep it somewhat fast */
+ if (len < 16) {
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ if (adler >= BASE)
+ adler -= BASE;
+ MOD4(sum2); /* only added so many BASE's */
+ return adler | (sum2 << 16);
+ }
+
+ /* do length NMAX blocks -- requires just one modulo operation */
+ while (len >= NMAX) {
+ len -= NMAX;
+ n = NMAX / 16; /* NMAX is divisible by 16 */
+ do {
+ DO16(buf); /* 16 sums unrolled */
+ buf += 16;
+ } while (--n);
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* do remaining bytes (less than NMAX, still just one modulo) */
+ if (len) { /* avoid modulos if none remaining */
+ while (len >= 16) {
+ len -= 16;
DO16(buf);
buf += 16;
- k -= 16;
}
- if (k != 0) do {
- s1 += *buf++;
- s2 += s1;
- } while (--k);
- MOD(s1);
- MOD(s2);
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ MOD(adler);
+ MOD(sum2);
}
- return (s2 << 16) | s1;
+
+ /* return recombined sums */
+ return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off_t len2;
+{
+ unsigned long sum1;
+ unsigned long sum2;
+ unsigned rem;
+
+ /* the derivation of this formula is left as an exercise for the reader */
+ rem = (unsigned)(len2 % BASE);
+ sum1 = adler1 & 0xffff;
+ sum2 = rem * sum1;
+ MOD(sum2);
+ sum1 += (adler2 & 0xffff) + BASE - 1;
+ sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+ if (sum1 > BASE) sum1 -= BASE;
+ if (sum1 > BASE) sum1 -= BASE;
+ if (sum2 > (BASE << 1)) sum2 -= (BASE << 1);
+ if (sum2 > BASE) sum2 -= BASE;
+ return sum1 | (sum2 << 16);
}
Index: packages/services/compress/zlib/current/src/compress.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/compress.c,v
retrieving revision 1.3
diff -u -r1.3 compress.c
--- packages/services/compress/zlib/current/src/compress.c 24 May 2004 19:33:35 -0000 1.3
+++ packages/services/compress/zlib/current/src/compress.c 28 Jul 2005 07:17:55 -0000
@@ -1,5 +1,5 @@
/* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
Index: packages/services/compress/zlib/current/src/configure
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/configure,v
retrieving revision 1.3
diff -u -r1.3 configure
--- packages/services/compress/zlib/current/src/configure 29 Jun 2005 19:36:41 -0000 1.3
+++ packages/services/compress/zlib/current/src/configure 28 Jul 2005 07:17:55 -0000
@@ -82,14 +82,21 @@
QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
# (alain.bonnefoy@icbt.com)
LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"};;
- HP-UX*) LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+ HP-UX*)
+ LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ ia64)
+ shared_ext='.so'
+ SHAREDLIB='libz.so';;
+ *)
shared_ext='.sl'
SHAREDLIB='libz.sl';;
+ esac;;
Darwin*) shared_ext='.dylib'
SHAREDLIB=libz$shared_ext
SHAREDLIBV=libz.$VER$shared_ext
SHAREDLIBM=libz.$VER1$shared_ext
- LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBV -compatibility_version $VER2 -current_version $VER"};;
+ LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER"};;
*) LDSHARED=${LDSHARED-"$cc -shared"};;
esac
else
@@ -100,8 +107,14 @@
CFLAGS=${CFLAGS-"-O"}
# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
LDSHARED=${LDSHARED-"ld -b"}
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ ia64)
+ shared_ext='.so'
+ SHAREDLIB='libz.so';;
+ *)
shared_ext='.sl'
SHAREDLIB='libz.sl';;
+ esac;;
IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
CFLAGS=${CFLAGS-"-ansi -O2"}
LDSHARED=${LDSHARED-"cc -shared"};;
@@ -125,6 +138,9 @@
SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
CFLAGS=${CFLAGS-"-O2"}
LDSHARED=${LDSHARED-"ld"};;
+ SunStudio\ 9*) SFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+ CFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xtarget=ultra3 -xarch=v9b"}
+ LDSHARED=${LDSHARED-"cc -xarch=v9b"};;
UNIX_System_V\ 4.2.0)
SFLAGS=${CFLAGS-"-KPIC -O"}
CFLAGS=${CFLAGS-"-O"}
Index: packages/services/compress/zlib/current/src/deflate.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/deflate.c,v
retrieving revision 1.4
diff -u -r1.4 deflate.c
--- packages/services/compress/zlib/current/src/deflate.c 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/deflate.c 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2004 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
- " deflate 1.2.2 Copyright 1995-2004 Jean-loup Gailly ";
+ " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -264,7 +264,7 @@
#endif
if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
- strategy < 0 || strategy > Z_RLE) {
+ strategy < 0 || strategy > Z_FIXED) {
return Z_STREAM_ERROR;
}
if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */
@@ -274,6 +274,7 @@
s->strm = strm;
s->wrap = wrap;
+ s->gzhead = Z_NULL;
s->w_bits = windowBits;
s->w_size = 1 << s->w_bits;
s->w_mask = s->w_size - 1;
@@ -333,9 +334,7 @@
if (length < MIN_MATCH) return Z_OK;
if (length > MAX_DIST(s)) {
length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
}
zmemcpy(s->window, dictionary, length);
s->strstart = length;
@@ -391,6 +390,17 @@
}
/* ========================================================================= */
+int ZEXPORT deflateSetHeader (strm, head)
+ z_streamp strm;
+ gz_headerp head;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+ strm->state->gzhead = head;
+ return Z_OK;
+}
+
+/* ========================================================================= */
int ZEXPORT deflatePrime (strm, bits, value)
z_streamp strm;
int bits;
@@ -420,7 +430,7 @@
#else
if (level == Z_DEFAULT_COMPRESSION) level = 6;
#endif
- if (level < 0 || level > 9 || strategy < 0 || strategy > Z_RLE) {
+ if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
return Z_STREAM_ERROR;
}
func = configuration_table[s->level].func;
@@ -440,6 +450,25 @@
return err;
}
+/* ========================================================================= */
+int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
+ z_streamp strm;
+ int good_length;
+ int max_lazy;
+ int nice_length;
+ int max_chain;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+ s->good_match = good_length;
+ s->max_lazy_match = max_lazy;
+ s->nice_match = nice_length;
+ s->max_chain_length = max_chain;
+ return Z_OK;
+}
+
/* =========================================================================
* For the default windowBits of 15 and memLevel of 8, this function returns
* a close to exact, as well as small, upper bound on the compressed size.
@@ -548,20 +577,47 @@
if (s->status == INIT_STATE) {
#ifdef GZIP
if (s->wrap == 2) {
+ strm->adler = crc32(0L, Z_NULL, 0);
put_byte(s, 31);
put_byte(s, 139);
put_byte(s, 8);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, s->level == 9 ? 2 :
- (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
- 4 : 0));
- put_byte(s, 255);
- s->status = BUSY_STATE;
- strm->adler = crc32(0L, Z_NULL, 0);
+ if (s->gzhead == NULL) {
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, OS_CODE);
+ s->status = BUSY_STATE;
+ }
+ else {
+ put_byte(s, (s->gzhead->text ? 1 : 0) +
+ (s->gzhead->hcrc ? 2 : 0) +
+ (s->gzhead->extra == Z_NULL ? 0 : 4) +
+ (s->gzhead->name == Z_NULL ? 0 : 8) +
+ (s->gzhead->comment == Z_NULL ? 0 : 16)
+ );
+ put_byte(s, (Byte)(s->gzhead->time & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, s->gzhead->os & 0xff);
+ if (s->gzhead->extra != NULL) {
+ put_byte(s, s->gzhead->extra_len & 0xff);
+ put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
+ }
+ if (s->gzhead->hcrc)
+ strm->adler = crc32(strm->adler, s->pending_buf,
+ s->pending);
+ s->gzindex = 0;
+ s->status = EXTRA_STATE;
+ }
}
else
#endif
@@ -592,6 +648,110 @@
strm->adler = adler32(0L, Z_NULL, 0);
}
}
+#ifdef GZIP
+ if (s->status == EXTRA_STATE) {
+ if (s->gzhead->extra != NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+
+ while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size)
+ break;
+ }
+ put_byte(s, s->gzhead->extra[s->gzindex]);
+ s->gzindex++;
+ }
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (s->gzindex == s->gzhead->extra_len) {
+ s->gzindex = 0;
+ s->status = NAME_STATE;
+ }
+ }
+ else
+ s->status = NAME_STATE;
+ }
+ if (s->status == NAME_STATE) {
+ if (s->gzhead->name != NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->name[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0) {
+ s->gzindex = 0;
+ s->status = COMMENT_STATE;
+ }
+ }
+ else
+ s->status = COMMENT_STATE;
+ }
+ if (s->status == COMMENT_STATE) {
+ if (s->gzhead->comment != NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->comment[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0)
+ s->status = HCRC_STATE;
+ }
+ else
+ s->status = HCRC_STATE;
+ }
+ if (s->status == HCRC_STATE) {
+ if (s->gzhead->hcrc) {
+ if (s->pending + 2 > s->pending_buf_size)
+ flush_pending(strm);
+ if (s->pending + 2 <= s->pending_buf_size) {
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+ strm->adler = crc32(0L, Z_NULL, 0);
+ s->status = BUSY_STATE;
+ }
+ }
+ else
+ s->status = BUSY_STATE;
+ }
+#endif
/* Flush as much pending output as possible */
if (s->pending != 0) {
@@ -704,7 +864,12 @@
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
status = strm->state->status;
- if (status != INIT_STATE && status != BUSY_STATE &&
+ if (status != INIT_STATE &&
+ status != EXTRA_STATE &&
+ status != NAME_STATE &&
+ status != COMMENT_STATE &&
+ status != HCRC_STATE &&
+ status != BUSY_STATE &&
status != FINISH_STATE) {
return Z_STREAM_ERROR;
}
@@ -744,12 +909,12 @@
ss = source->state;
- *dest = *source;
+ zmemcpy(dest, source, sizeof(z_stream));
ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
if (ds == Z_NULL) return Z_MEM_ERROR;
dest->state = (struct internal_state FAR *) ds;
- *ds = *ss;
+ zmemcpy(ds, ss, sizeof(deflate_state));
ds->strm = dest;
ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
@@ -838,9 +1003,11 @@
s->match_length = s->prev_length = MIN_MATCH-1;
s->match_available = 0;
s->ins_h = 0;
+#ifndef FASTEST
#ifdef ASMV
match_init(); /* initialize the asm code */
#endif
+#endif
}
#ifndef FASTEST
@@ -909,7 +1076,12 @@
match = s->window + cur_match;
/* Skip to next match if the match length cannot increase
- * or if the match length is less than 2:
+ * or if the match length is less than 2. Note that the checks below
+ * for insufficient lookahead only occur occasionally for performance
+ * reasons. Therefore uninitialized memory will be accessed, and
+ * conditional jumps will be made that depend on those values.
+ * However the length of the match is limited to the lookahead, so
+ * the output of deflate is not affected by the uninitialized values.
*/
#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
/* This code assumes sizeof(unsigned short) == 2. Do not use
@@ -1131,6 +1303,7 @@
later. (Using level 0 permanently is not an optimal usage of
zlib, so we don't care about this pathological case.)
*/
+ /* %%% avoid this when Z_RLE */
n = s->hash_size;
p = &s->head[n];
do {
@@ -1309,12 +1482,12 @@
* of the string with itself at the start of the input file).
*/
#ifdef FASTEST
- if ((s->strategy < Z_HUFFMAN_ONLY) ||
+ if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) ||
(s->strategy == Z_RLE && s->strstart - hash_head == 1)) {
s->match_length = longest_match_fast (s, hash_head);
}
#else
- if (s->strategy < Z_HUFFMAN_ONLY) {
+ if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
s->match_length = longest_match (s, hash_head);
} else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
s->match_length = longest_match_fast (s, hash_head);
@@ -1418,7 +1591,7 @@
* of window index 0 (in particular we have to avoid a match
* of the string with itself at the start of the input file).
*/
- if (s->strategy < Z_HUFFMAN_ONLY) {
+ if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
s->match_length = longest_match (s, hash_head);
} else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
s->match_length = longest_match_fast (s, hash_head);
@@ -1500,3 +1673,64 @@
return flush == Z_FINISH ? finish_done : block_done;
}
#endif /* FASTEST */
+
+#if 0
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one. Do not maintain a hash table. (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+local block_state deflate_rle(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+ uInt run; /* length of run */
+ uInt max; /* maximum length of run */
+ uInt prev; /* byte at distance one to match */
+ Bytef *scan; /* scan for end of run */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the longest encodable run.
+ */
+ if (s->lookahead < MAX_MATCH) {
+ fill_window(s);
+ if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* See how many times the previous byte repeats */
+ run = 0;
+ if (s->strstart > 0) { /* if there is a previous byte, that is */
+ max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH;
+ scan = s->window + s->strstart - 1;
+ prev = *scan++;
+ do {
+ if (*scan++ != prev)
+ break;
+ } while (++run < max);
+ }
+
+ /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+ if (run >= MIN_MATCH) {
+ check_match(s, s->strstart, s->strstart - 1, run);
+ _tr_tally_dist(s, 1, run - MIN_MATCH, bflush);
+ s->lookahead -= run;
+ s->strstart += run;
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+#endif
Index: packages/services/compress/zlib/current/src/deflate.h
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/deflate.h,v
retrieving revision 1.4
diff -u -r1.4 deflate.h
--- packages/services/compress/zlib/current/src/deflate.h 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/deflate.h 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* deflate.h -- internal compression state
- * Copyright (C) 1995-2002 Jean-loup Gailly
+ * Copyright (C) 1995-2004 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -49,6 +49,10 @@
/* All codes must not exceed MAX_BITS bits */
#define INIT_STATE 42
+#define EXTRA_STATE 69
+#define NAME_STATE 73
+#define COMMENT_STATE 91
+#define HCRC_STATE 103
#define BUSY_STATE 113
#define FINISH_STATE 666
/* Stream status */
@@ -93,8 +97,10 @@
Bytef *pending_buf; /* output still pending */
ulg pending_buf_size; /* size of pending_buf */
Bytef *pending_out; /* next pending byte to output to the stream */
- int pending; /* nb of bytes in the pending buffer */
+ uInt pending; /* nb of bytes in the pending buffer */
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ gz_headerp gzhead; /* gzip header information to write */
+ uInt gzindex; /* where in extra, name, or comment */
Byte method; /* STORED (for zip only) or DEFLATED */
int last_flush; /* value of flush param for previous deflate call */
Index: packages/services/compress/zlib/current/src/example.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/example.c,v
retrieving revision 1.3
diff -u -r1.3 example.c
--- packages/services/compress/zlib/current/src/example.c 24 May 2004 19:33:35 -0000 1.3
+++ packages/services/compress/zlib/current/src/example.c 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2004 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -11,8 +11,6 @@
#ifdef STDC
# include <string.h>
# include <stdlib.h>
-#else
- extern void exit OF((int));
#endif
#if defined(VMS) || defined(RISCOS)
Index: packages/services/compress/zlib/current/src/gzio.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/gzio.c,v
retrieving revision 1.4
diff -u -r1.4 gzio.c
--- packages/services/compress/zlib/current/src/gzio.c 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/gzio.c 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* gzio.c -- IO on .gz files
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
@@ -11,7 +11,7 @@
#include "zutil.h"
-#ifdef NO_DEFLATE /* for compatiblity with old definition */
+#ifdef NO_DEFLATE /* for compatibility with old definition */
# define NO_GZCOMPRESS
#endif
@@ -220,7 +220,7 @@
int fd;
const char *mode;
{
- char name[20];
+ char name[46]; /* allow for up to 128-bit integers */
if (fd < 0) return (gzFile)Z_NULL;
sprintf(name, "<fd:%d>", fd); /* for debugging */
@@ -264,7 +264,7 @@
if (s->z_eof) return EOF;
if (s->stream.avail_in == 0) {
errno = 0;
- s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+ s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
if (s->stream.avail_in == 0) {
s->z_eof = 1;
if (ferror(s->file)) s->z_err = Z_ERRNO;
@@ -300,7 +300,7 @@
if (len < 2) {
if (len) s->inbuf[0] = s->stream.next_in[0];
errno = 0;
- len = fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
+ len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
s->stream.avail_in += len;
s->stream.next_in = s->inbuf;
@@ -415,6 +415,7 @@
s->stream.avail_out--;
s->back = EOF;
s->out++;
+ start++;
if (s->last) {
s->z_err = Z_STREAM_END;
return 1;
@@ -436,8 +437,8 @@
s->stream.avail_in -= n;
}
if (s->stream.avail_out > 0) {
- s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
- s->file);
+ s->stream.avail_out -=
+ (uInt)fread(next_out, 1, s->stream.avail_out, s->file);
}
len -= s->stream.avail_out;
s->in += len;
@@ -448,17 +449,13 @@
if (s->stream.avail_in == 0 && !s->z_eof) {
errno = 0;
- s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+ s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
if (s->stream.avail_in == 0) {
s->z_eof = 1;
if (ferror(s->file)) {
s->z_err = Z_ERRNO;
break;
}
- if (feof(s->file)) { /* avoid error for empty file */
- s->z_err = Z_STREAM_END;
- break;
- }
}
s->stream.next_in = s->inbuf;
}
@@ -492,6 +489,9 @@
}
s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+ if (len == s->stream.avail_out &&
+ (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
+ return -1;
return (int)(len - s->stream.avail_out);
}
@@ -903,6 +903,18 @@
}
/* ===========================================================================
+ Returns 1 if reading and doing so transparently, otherwise zero.
+*/
+int ZEXPORT gzdirect (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'r') return 0;
+ return s->transparent;
+}
+
+/* ===========================================================================
Outputs a long in LSB order to the given file
*/
local void putLong (file, x)
@@ -941,7 +953,6 @@
int ZEXPORT gzclose (file)
gzFile file;
{
- int err;
gz_stream *s = (gz_stream*)file;
if (s == NULL) return Z_STREAM_ERROR;
@@ -950,8 +961,8 @@
#ifdef NO_GZCOMPRESS
return Z_STREAM_ERROR;
#else
- err = do_flush (file, Z_FINISH);
- if (err != Z_OK) return destroy((gz_stream*)file);
+ if (do_flush (file, Z_FINISH) != Z_OK)
+ return destroy((gz_stream*)file);
putLong (s->file, s->crc);
putLong (s->file, (uLong)(s->in & 0xffffffff));
@@ -960,10 +971,16 @@
return destroy((gz_stream*)file);
}
+#ifdef STDC
+# define zstrerror(errnum) strerror(errnum)
+#else
+# define zstrerror(errnum) ""
+#endif
+
/* ===========================================================================
- Returns the error message for the last error which occured on the
+ Returns the error message for the last error which occurred on the
given compressed file. errnum is set to zlib error number. If an
- error occured in the file system and not in the compression library,
+ error occurred in the file system and not in the compression library,
errnum is set to Z_ERRNO and the application may consult errno
to get the exact error code.
*/
Index: packages/services/compress/zlib/current/src/infback.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/infback.c,v
retrieving revision 1.2
diff -u -r1.2 infback.c
--- packages/services/compress/zlib/current/src/infback.c 29 Jun 2005 19:36:41 -0000 1.2
+++ packages/services/compress/zlib/current/src/infback.c 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -26,7 +26,7 @@
window and output buffer that is 2**windowBits bytes.
*/
int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
-z_stream FAR *strm;
+z_streamp strm;
int windowBits;
unsigned char FAR *window;
const char *version;
@@ -50,7 +50,8 @@
sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
- strm->state = (voidpf)state;
+ strm->state = (struct internal_state FAR *)state;
+ state->dmax = 32768U;
state->wbits = windowBits;
state->wsize = 1U << windowBits;
state->window = window;
@@ -238,7 +239,7 @@
are not correct, i.e. strm is Z_NULL or the state was not initialized.
*/
int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
-z_stream FAR *strm;
+z_streamp strm;
in_func in;
void FAR *in_desc;
out_func out;
@@ -611,7 +612,7 @@
}
int ZEXPORT inflateBackEnd(strm)
-z_stream FAR *strm;
+z_streamp strm;
{
if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
return Z_STREAM_ERROR;
Index: packages/services/compress/zlib/current/src/inffast.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/inffast.c,v
retrieving revision 1.4
diff -u -r1.4 inffast.c
--- packages/services/compress/zlib/current/src/inffast.c 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/inffast.c 28 Jul 2005 07:17:56 -0000
@@ -74,6 +74,9 @@
unsigned char FAR *out; /* local strm->next_out */
unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
unsigned char FAR *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
unsigned wsize; /* window size or zero if not using window */
unsigned whave; /* valid bytes in the window */
unsigned write; /* window write index */
@@ -98,6 +101,9 @@
out = strm->next_out - OFF;
beg = out - (start - strm->avail_out);
end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
wsize = state->wsize;
whave = state->whave;
write = state->write;
@@ -167,6 +173,13 @@
}
}
dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
hold >>= op;
bits -= op;
Tracevv((stderr, "inflate: distance %u\n", dist));
Index: packages/services/compress/zlib/current/src/inflate.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/inflate.c,v
retrieving revision 1.6
diff -u -r1.6 inflate.c
--- packages/services/compress/zlib/current/src/inflate.c 29 Jun 2005 19:36:41 -0000 1.6
+++ packages/services/compress/zlib/current/src/inflate.c 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* inflate.c -- zlib decompression
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -113,8 +113,11 @@
state->mode = HEAD;
state->last = 0;
state->havedict = 0;
+ state->dmax = 32768U;
+ state->head = Z_NULL;
state->wsize = 0;
state->whave = 0;
+ state->write = 0;
state->hold = 0;
state->bits = 0;
state->lencode = state->distcode = state->next = state->codes;
@@ -122,6 +125,22 @@
return Z_OK;
}
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += value << state->bits;
+ state->bits += bits;
+ return Z_OK;
+}
+
int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
z_streamp strm;
int windowBits;
@@ -144,7 +163,7 @@
ZALLOC(strm, 1, sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
- strm->state = (voidpf)state;
+ strm->state = (struct internal_state FAR *)state;
if (windowBits < 0) {
state->wrap = 0;
windowBits = -windowBits;
@@ -582,6 +601,8 @@
break;
}
state->flags = 0; /* expect zlib header */
+ if (state->head != Z_NULL)
+ state->head->done = -1;
if (!(state->wrap & 1) || /* check if zlib header allowed */
#else
if (
@@ -597,11 +618,13 @@
break;
}
DROPBITS(4);
- if (BITS(4) + 8 > state->wbits) {
+ len = BITS(4) + 8;
+ if (len > state->wbits) {
strm->msg = (char *)"invalid window size";
state->mode = BAD;
break;
}
+ state->dmax = 1U << len;
Tracev((stderr, "inflate: zlib header ok\n"));
strm->adler = state->check = adler32(0L, Z_NULL, 0);
state->mode = hold & 0x200 ? DICTID : TYPE;
@@ -621,16 +644,24 @@
state->mode = BAD;
break;
}
+ if (state->head != Z_NULL)
+ state->head->text = (int)((hold >> 8) & 1);
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
state->mode = TIME;
case TIME:
NEEDBITS(32);
+ if (state->head != Z_NULL)
+ state->head->time = hold;
if (state->flags & 0x0200) CRC4(state->check, hold);
INITBITS();
state->mode = OS;
case OS:
NEEDBITS(16);
+ if (state->head != Z_NULL) {
+ state->head->xflags = (int)(hold & 0xff);
+ state->head->os = (int)(hold >> 8);
+ }
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
state->mode = EXLEN;
@@ -638,15 +669,26 @@
if (state->flags & 0x0400) {
NEEDBITS(16);
state->length = (unsigned)(hold);
+ if (state->head != Z_NULL)
+ state->head->extra_len = (unsigned)hold;
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
}
+ else if (state->head != Z_NULL)
+ state->head->extra = Z_NULL;
state->mode = EXTRA;
case EXTRA:
if (state->flags & 0x0400) {
copy = state->length;
if (copy > have) copy = have;
if (copy) {
+ if (state->head != Z_NULL &&
+ state->head->extra != Z_NULL) {
+ len = state->head->extra_len - state->length;
+ zmemcpy(state->head->extra + len, next,
+ len + copy > state->head->extra_max ?
+ state->head->extra_max - len : copy);
+ }
if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
@@ -655,6 +697,7 @@
}
if (state->length) goto inf_leave;
}
+ state->length = 0;
state->mode = NAME;
case NAME:
if (state->flags & 0x0800) {
@@ -662,13 +705,20 @@
copy = 0;
do {
len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->name != Z_NULL &&
+ state->length < state->head->name_max)
+ state->head->name[state->length++] = len;
} while (len && copy < have);
- if (state->flags & 0x02000)
+ if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
next += copy;
if (len) goto inf_leave;
}
+ else if (state->head != Z_NULL)
+ state->head->name = Z_NULL;
+ state->length = 0;
state->mode = COMMENT;
case COMMENT:
if (state->flags & 0x1000) {
@@ -676,13 +726,19 @@
copy = 0;
do {
len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->comment != Z_NULL &&
+ state->length < state->head->comm_max)
+ state->head->comment[state->length++] = len;
} while (len && copy < have);
- if (state->flags & 0x02000)
+ if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
next += copy;
if (len) goto inf_leave;
}
+ else if (state->head != Z_NULL)
+ state->head->comment = Z_NULL;
state->mode = HCRC;
case HCRC:
if (state->flags & 0x0200) {
@@ -694,6 +750,10 @@
}
INITBITS();
}
+ if (state->head != Z_NULL) {
+ state->head->hcrc = (int)((state->flags >> 9) & 1);
+ state->head->done = 1;
+ }
strm->adler = state->check = crc32(0L, Z_NULL, 0);
state->mode = TYPE;
break;
@@ -969,6 +1029,13 @@
state->offset += BITS(state->extra);
DROPBITS(state->extra);
}
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
if (state->offset > state->whave + out - left) {
strm->msg = (char *)"invalid distance too far back";
state->mode = BAD;
@@ -1110,12 +1177,16 @@
/* check state */
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
- if (state->mode != DICT) return Z_STREAM_ERROR;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
/* check for correct dictionary id */
- id = adler32(0L, Z_NULL, 0);
- id = adler32(id, dictionary, dictLength);
- if (id != state->check) return Z_DATA_ERROR;
+ if (state->mode == DICT) {
+ id = adler32(0L, Z_NULL, 0);
+ id = adler32(id, dictionary, dictLength);
+ if (id != state->check)
+ return Z_DATA_ERROR;
+ }
/* copy dictionary to window */
if (updatewindow(strm, strm->avail_out)) {
@@ -1137,6 +1208,23 @@
return Z_OK;
}
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+ /* save header structure */
+ state->head = head;
+ head->done = 0;
+ return Z_OK;
+}
+
/*
Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
or when out of input. When called, *have is the number of pattern bytes
@@ -1239,6 +1327,7 @@
struct inflate_state FAR *state;
struct inflate_state FAR *copy;
unsigned char FAR *window;
+ unsigned wsize;
/* check input */
if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
@@ -1261,14 +1350,19 @@
}
/* copy state */
- *dest = *source;
- *copy = *state;
- copy->lencode = copy->codes + (state->lencode - state->codes);
- copy->distcode = copy->codes + (state->distcode - state->codes);
+ zmemcpy(dest, source, sizeof(z_stream));
+ zmemcpy(copy, state, sizeof(struct inflate_state));
+ if (state->lencode >= state->codes &&
+ state->lencode <= state->codes + ENOUGH - 1) {
+ copy->lencode = copy->codes + (state->lencode - state->codes);
+ copy->distcode = copy->codes + (state->distcode - state->codes);
+ }
copy->next = copy->codes + (state->next - state->codes);
- if (window != Z_NULL)
- zmemcpy(window, state->window, 1U << state->wbits);
+ if (window != Z_NULL) {
+ wsize = 1U << state->wbits;
+ zmemcpy(window, state->window, wsize);
+ }
copy->window = window;
- dest->state = (voidpf)copy;
+ dest->state = (struct internal_state FAR *)copy;
return Z_OK;
}
Index: packages/services/compress/zlib/current/src/inflate.h
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/inflate.h,v
retrieving revision 1.1
diff -u -r1.1 inflate.h
--- packages/services/compress/zlib/current/src/inflate.h 25 May 2004 13:31:20 -0000 1.1
+++ packages/services/compress/zlib/current/src/inflate.h 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2004 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -19,7 +19,6 @@
/* Possible inflate modes between inflate() calls */
typedef enum {
HEAD, /* i: waiting for magic header */
-#ifdef GUNZIP
FLAGS, /* i: waiting for method and flags (gzip) */
TIME, /* i: waiting for modification time (gzip) */
OS, /* i: waiting for extra flags and operating system (gzip) */
@@ -28,7 +27,6 @@
NAME, /* i: waiting for end of file name (gzip) */
COMMENT, /* i: waiting for end of comment (gzip) */
HCRC, /* i: waiting for header crc (gzip) */
-#endif
DICTID, /* i: waiting for dictionary check value */
DICT, /* waiting for inflateSetDictionary() call */
TYPE, /* i: waiting for type bits, including last-flag bit */
@@ -45,9 +43,7 @@
MATCH, /* o: waiting for output space to copy string */
LIT, /* o: waiting for output space to write literal */
CHECK, /* i: waiting for 32-bit check value */
-#ifdef GUNZIP
LENGTH, /* i: waiting for 32-bit length (gzip) */
-#endif
DONE, /* finished check, done -- remain here until reset */
BAD, /* got a data error -- remain here until reset */
MEM, /* got an inflate() memory error -- remain here until reset */
@@ -84,8 +80,10 @@
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
int havedict; /* true if dictionary provided */
int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
unsigned long check; /* protected copy of check value */
unsigned long total; /* protected copy of output count */
+ gz_headerp head; /* where to save gzip header information */
/* sliding window */
unsigned wbits; /* log base 2 of requested window size */
unsigned wsize; /* window size or zero if not using window */
Index: packages/services/compress/zlib/current/src/inftrees.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/inftrees.c,v
retrieving revision 1.4
diff -u -r1.4 inftrees.c
--- packages/services/compress/zlib/current/src/inftrees.c 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/inftrees.c 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2004 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
- " inflate 1.2.2 Copyright 1995-2004 Mark Adler ";
+ " inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
- 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 199, 198};
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
@@ -134,7 +134,7 @@
left -= count[len];
if (left < 0) return -1; /* over-subscribed */
}
- if (left > 0 && (type == CODES || (codes - count[0] != 1)))
+ if (left > 0 && (type == CODES || max != 1))
return -1; /* incomplete set */
/* generate offsets into symbol table for each length for sorting */
@@ -232,6 +232,7 @@
/* replicate for those indices with low len bits equal to huff */
incr = 1U << (len - drop);
fill = 1U << curr;
+ min = fill; /* save offset to next table */
do {
fill -= incr;
next[(huff >> drop) + fill] = this;
@@ -262,7 +263,7 @@
drop = root;
/* increment past last table */
- next += 1U << curr;
+ next += min; /* here min is 1 << curr */
/* determine length of next table */
curr = len - drop;
Index: packages/services/compress/zlib/current/src/inftrees.h
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/inftrees.h,v
retrieving revision 1.3
diff -u -r1.3 inftrees.h
--- packages/services/compress/zlib/current/src/inftrees.h 24 May 2004 19:33:35 -0000 1.3
+++ packages/services/compress/zlib/current/src/inftrees.h 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -36,12 +36,12 @@
*/
/* Maximum size of dynamic tree. The maximum found in a long but non-
- exhaustive search was 1004 code structures (850 for length/literals
- and 154 for distances, the latter actually the result of an
+ exhaustive search was 1444 code structures (852 for length/literals
+ and 592 for distances, the latter actually the result of an
exhaustive search). The true maximum is not known, but the value
below is more than safe. */
-#define ENOUGH 1440
-#define MAXD 154
+#define ENOUGH 2048
+#define MAXD 592
/* Type of code to build for inftable() */
typedef enum {
Index: packages/services/compress/zlib/current/src/minigzip.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/minigzip.c,v
retrieving revision 1.3
diff -u -r1.3 minigzip.c
--- packages/services/compress/zlib/current/src/minigzip.c 24 May 2004 19:33:35 -0000 1.3
+++ packages/services/compress/zlib/current/src/minigzip.c 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -21,8 +21,6 @@
#ifdef STDC
# include <string.h>
# include <stdlib.h>
-#else
- extern void exit OF((int));
#endif
#ifdef USE_MMAP
@@ -297,6 +295,8 @@
break;
argc--, argv++;
}
+ if (outmode[3] == ' ')
+ outmode[3] = 0;
if (argc == 0) {
SET_BINARY_MODE(stdin);
SET_BINARY_MODE(stdout);
Index: packages/services/compress/zlib/current/src/trees.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/trees.c,v
retrieving revision 1.4
diff -u -r1.4 trees.c
--- packages/services/compress/zlib/current/src/trees.c 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/trees.c 28 Jul 2005 07:17:56 -0000
@@ -1,5 +1,5 @@
/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2003 Jean-loup Gailly
+ * Copyright (C) 1995-2005 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -555,7 +555,7 @@
while (n != 0) {
m = s->heap[--h];
if (m > max_code) continue;
- if (tree[m].Len != (unsigned) bits) {
+ if ((unsigned) tree[m].Len != (unsigned) bits) {
Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
s->opt_len += ((long)bits - (long)tree[m].Len)
*(long)tree[m].Freq;
@@ -930,8 +930,9 @@
/* Build the Huffman trees unless a stored block is forced */
if (s->level > 0) {
- /* Check if the file is ascii or binary */
- if (s->strm->data_type == Z_UNKNOWN) set_data_type(s);
+ /* Check if the file is binary or text */
+ if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN)
+ set_data_type(s);
/* Construct the literal and distance trees */
build_tree(s, (tree_desc *)(&(s->l_desc)));
@@ -982,7 +983,7 @@
#ifdef FORCE_STATIC
} else if (static_lenb >= 0) { /* force static trees */
#else
- } else if (static_lenb == opt_lenb) {
+ } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
#endif
send_bits(s, (STATIC_TREES<<1)+eof, 3);
compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
@@ -1117,21 +1118,24 @@
}
/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
+ * Set the data type to BINARY or TEXT, using a crude approximation:
+ * set it to Z_TEXT if all symbols are either printable characters (33 to 255)
+ * or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise.
+ * IN assertion: the fields Freq of dyn_ltree are set.
*/
local void set_data_type(s)
deflate_state *s;
{
- int n = 0;
- unsigned ascii_freq = 0;
- unsigned bin_freq = 0;
- while (n < 7) bin_freq += s->dyn_ltree[n++].Freq;
- while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq;
- while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
- s->strm->data_type = bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII;
+ int n;
+
+ for (n = 0; n < 9; n++)
+ if (s->dyn_ltree[n].Freq != 0)
+ break;
+ if (n == 9)
+ for (n = 14; n < 32; n++)
+ if (s->dyn_ltree[n].Freq != 0)
+ break;
+ s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY;
}
/* ===========================================================================
Index: packages/services/compress/zlib/current/src/zlib.3
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/zlib.3,v
retrieving revision 1.4
diff -u -r1.4 zlib.3
--- packages/services/compress/zlib/current/src/zlib.3 29 Jun 2005 19:36:41 -0000 1.4
+++ packages/services/compress/zlib/current/src/zlib.3 28 Jul 2005 07:17:57 -0000
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "3 October 2004"
+.TH ZLIB 3 "18 July 2005"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
@@ -133,8 +133,8 @@
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS
-Version 1.2.2
-Copyright (C) 1995-2004 Jean-loup Gailly (jloup@gzip.org)
+Version 1.2.3
+Copyright (C) 1995-2005 Jean-loup Gailly (jloup@gzip.org)
and Mark Adler (madler@alumni.caltech.edu).
.LP
This software is provided "as-is,"
Index: packages/services/compress/zlib/current/src/zutil.c
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/zutil.c,v
retrieving revision 1.3
diff -u -r1.3 zutil.c
--- packages/services/compress/zlib/current/src/zutil.c 24 May 2004 19:33:35 -0000 1.3
+++ packages/services/compress/zlib/current/src/zutil.c 28 Jul 2005 07:17:57 -0000
@@ -1,5 +1,5 @@
/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -11,10 +11,6 @@
struct internal_state {int dummy;}; /* for buggy compilers */
#endif
-#ifndef STDC
-extern void exit OF((int));
-#endif
-
const char * const z_errmsg[10] = {
"need dictionary", /* Z_NEED_DICT 2 */
"stream end", /* Z_STREAM_END 1 */
@@ -78,38 +74,38 @@
flags += 1 << 13;
#endif
#ifdef NO_GZCOMPRESS
- flags += 1 << 16;
+ flags += 1L << 16;
#endif
#ifdef NO_GZIP
- flags += 1 << 17;
+ flags += 1L << 17;
#endif
#ifdef PKZIP_BUG_WORKAROUND
- flags += 1 << 20;
+ flags += 1L << 20;
#endif
#ifdef FASTEST
- flags += 1 << 21;
+ flags += 1L << 21;
#endif
#ifdef STDC
# ifdef NO_vsnprintf
- flags += 1 << 25;
+ flags += 1L << 25;
# ifdef HAS_vsprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# else
# ifdef HAS_vsnprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# endif
#else
- flags += 1 << 24;
+ flags += 1L << 24;
# ifdef NO_snprintf
- flags += 1 << 25;
+ flags += 1L << 25;
# ifdef HAS_sprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# else
# ifdef HAS_snprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# endif
#endif
@@ -141,7 +137,10 @@
}
#if defined(_WIN32_WCE)
- /* does not exist on WCE */
+ /* The Microsoft C Run-Time Library for Windows CE doesn't have
+ * errno. We define it as a global variable to simplify porting.
+ * Its value is always 0 and should not be used.
+ */
int errno = 0;
#endif
Index: packages/services/compress/zlib/current/src/zutil.h
===================================================================
RCS file: /cvs/ecos/ecos/packages/services/compress/zlib/current/src/zutil.h,v
retrieving revision 1.6
diff -u -r1.6 zutil.h
--- packages/services/compress/zlib/current/src/zutil.h 29 Jun 2005 19:36:41 -0000 1.6
+++ packages/services/compress/zlib/current/src/zutil.h 28 Jul 2005 07:17:57 -0000
@@ -1,5 +1,5 @@
/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -24,14 +24,26 @@
#endif // __ECOS__
#ifdef STDC
-# include <stddef.h>
+# ifndef _WIN32_WCE
+# include <stddef.h>
+# endif
# include <string.h>
# include <stdlib.h>
#endif
#ifdef NO_ERRNO_H
+# ifdef _WIN32_WCE
+ /* The Microsoft C Run-Time Library for Windows CE doesn't have
+ * errno. We define it as a global variable to simplify porting.
+ * Its value is always 0 and should not be used. We rename it to
+ * avoid conflict with other libraries that use the same workaround.
+ */
+# define errno z_errno
+# endif
extern int errno;
#else
-# include <errno.h>
+# ifndef _WIN32_WCE
+# include <errno.h>
+# endif
#endif
#ifndef local
@@ -112,6 +124,9 @@
#ifdef OS2
# define OS_CODE 0x06
+# ifdef M_I86
+ #include <malloc.h>
+# endif
#endif
#if defined(MACOS) || defined(TARGET_OS_MAC)
@@ -200,15 +215,6 @@
# define NO_vsnprintf
#endif
-#ifdef HAVE_STRERROR
-# ifndef VMS
- extern char *strerror OF((int));
-# endif
-# define zstrerror(errnum) strerror(errnum)
-#else
-# define zstrerror(errnum) ""
-#endif
-
#if defined(pyr)
# define NO_MEMCPY
#endif
--
Bye, Peter Korsgaard