This is the mail archive of the
ecos-patches@sourceware.org
mailing list for the eCos project.
Re: AW: Generic interrupt driven serial 16x5x IO driver for PXA 2x0 platforms
- From: Jonathan Larmour <jifl at eCosCentric dot com>
- To: "Neundorf, Alexander" <Alexander dot Neundorf at jenoptik dot com>
- Cc: ecos-patches at sourceware dot org
- Date: Wed, 22 Nov 2006 15:18:04 +0000
- Subject: Re: AW: Generic interrupt driven serial 16x5x IO driver for PXA 2x0 platforms
- References: <5A8A17126B73AC4C83968F6C4505E3C505BC001F@JO-EX01.JENOPTIK.NET>
Neundorf, Alexander wrote:
Hi,
Von: Jonathan Larmour [mailto:jifl@eCosCentric.com]
Neundorf, Alexander wrote:
Hi,
the attached patch adds a generic interrupt driven 16x5x
driver for PXA
platforms. It is actually a copy of the one for the IQ80321
with some stuff
renamed and the cdl script modified in a way so that it can
be used for any
PXA platform.
Please apply.
No additions to any ecos.db targets?
This can now be done using ecosconfig add :-)
While I personally dislike the hardware attribute stuff in ecos.db, it is
useful at least to have a target start with the appropriate set of default
packages.
Plus pxa2x0 targets would need to have the CYGPKG_IO_SERIAL_GENERIC_16X5X
package regardless, which _is_ marked as hardware in ecos.db. From looking
at it, it does seem there's a slight anomaly right now with the picasso and
ue250 boards which have the generic driver but no hardware specific drivers.
Unless you have an objection, I will add it to the existing pxa2x0 targets.
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
------["The best things in life aren't things."]------ Opinions==mine