This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: test of CAN callback stuff


On Fri, Aug 24, 2007 at 02:01:05PM +0700, Alexey Shusharin wrote:
> Hi
> 
> First patch is a test of callback stuff for CAN loop driver.

Thanks for the test case. It has been committed.

I also added an ecosconfig import file which can be used with the
synth target. It includes the io can support and the loopback
device. It also sets the options which i think need setting. With this
setup i can run all the tests. However two of the tests fail.

can_overrun1 fails with:

FAIL:<Number of events in /dev/can0 RX queue differs from queue size> Line: 171, File: /home/lunn/eCos/anoncvs-clean/packages/devs/can/loop/current/tests/can_overrun1.c

and can_txevent fails with:

RX bufsize: 32    events in RX buffer: 0
FAIL:<Receive queue of /dev/can0 not completely filled.> Line: 181, File: /home/lunn/eCos/anoncvs-clean/packages/devs/can/loop/current/tests/can_txevent.c
EXIT:<done>

Could somebody with a better understanding of the CAN code take a look
at this. Is my configuration wrong? Is the test wrong? Is the loop back
driver broken?

       Thanks
          Andrew
Index: ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/can/loop/current/ChangeLog,v
retrieving revision 1.4
diff -u -w -r1.4 ChangeLog
--- ChangeLog	10 Aug 2007 14:08:12 -0000	1.4
+++ ChangeLog	24 Aug 2007 13:44:20 -0000
@@ -1,3 +1,12 @@
+2007-08-24  Andrew Lunn <andrew.lunn>
+
+	* doc/synth_test.ecm: Import file for running the tests on synth.
+	
+2007-08-24  Alexey Shusharin <mrfinch@mail.ru>
+	
+	* tests/can_callback.c: Added test of CAN callback on event
+	* cdl/can_loop.cdl: Added can_callback.c into tests list
+	
 2007-08-09  Andrew Lunn  <andrew.lunn@ascom.ch>
 
 	* src/loop_can.c: Change all CYGPKG_IO_CAN_* to CYGPKG_DEVS_CAN_*
Index: cdl/can_loop.cdl
===================================================================
RCS file: /cvs/ecos/ecos/packages/devs/can/loop/current/cdl/can_loop.cdl,v
retrieving revision 1.3
diff -u -w -r1.3 can_loop.cdl
--- cdl/can_loop.cdl	3 Jul 2007 14:42:18 -0000	1.3
+++ cdl/can_loop.cdl	24 Aug 2007 13:44:20 -0000
@@ -131,7 +131,7 @@
         cdl_option CYGPKG_DEVS_CAN_LOOP_TESTS {
             display "CAN loop device driver tests"
             flavor  data
-            calculated { "tests/can_rdwr tests/can_timeout tests/can_txevent tests/can_overrun1 tests/can_overrun2 tests/can_nonblock"}         
+            calculated { "tests/can_rdwr tests/can_timeout tests/can_txevent tests/can_overrun1 tests/can_overrun2 tests/can_nonblock tests/can_callback" }         
             description   "
                 This option specifies the set of tests for the CAN loop device drivers."
         }
Index: doc/README
===================================================================
RCS file: doc/README
diff -N doc/README
--- /dev/null	1 Jan 1970 00:00:00 -0000
+++ doc/README	24 Aug 2007 13:44:20 -0000
@@ -0,0 +1,2 @@
+The file synth_test.ecm can be used to configure a synthetic target
+work tree to enable the various options to allow the tests to be run.
\ No newline at end of file
Index: doc/synth_test.ecm
===================================================================
RCS file: doc/synth_test.ecm
diff -N doc/synth_test.ecm
--- /dev/null	1 Jan 1970 00:00:00 -0000
+++ doc/synth_test.ecm	24 Aug 2007 13:44:20 -0000
@@ -0,0 +1,66 @@
+cdl_savefile_version 1;
+cdl_savefile_command cdl_savefile_version {};
+cdl_savefile_command cdl_savefile_command {};
+cdl_savefile_command cdl_configuration { description hardware template package };
+cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
+
+cdl_configuration eCos {
+    description "" ;
+    hardware    linux ;
+    template    default ;
+    package -hardware CYGPKG_HAL_SYNTH current ;
+    package -hardware CYGPKG_HAL_SYNTH_I386 current ;
+    package -hardware CYGPKG_DEVS_FLASH_SYNTH current ;
+    package -hardware CYGPKG_DEVS_ETH_ECOSYNTH current ;
+    package -hardware CYGPKG_DEVS_WATCHDOG_SYNTH current ;
+    package -hardware CYGPKG_DEVS_WALLCLOCK_SYNTH current ;
+    package -template CYGPKG_HAL current ;
+    package -template CYGPKG_IO current ;
+    package -template CYGPKG_IO_SERIAL current ;
+    package -template CYGPKG_INFRA current ;
+    package -template CYGPKG_KERNEL current ;
+    package -template CYGPKG_MEMALLOC current ;
+    package -template CYGPKG_ISOINFRA current ;
+    package -template CYGPKG_LIBC current ;
+    package -template CYGPKG_LIBC_I18N current ;
+    package -template CYGPKG_LIBC_SETJMP current ;
+    package -template CYGPKG_LIBC_SIGNALS current ;
+    package -template CYGPKG_LIBC_STARTUP current ;
+    package -template CYGPKG_LIBC_STDIO current ;
+    package -template CYGPKG_LIBC_STDLIB current ;
+    package -template CYGPKG_LIBC_STRING current ;
+    package -template CYGPKG_LIBC_TIME current ;
+    package -template CYGPKG_LIBM current ;
+    package -template CYGPKG_IO_WALLCLOCK current ;
+    package -template CYGPKG_ERROR current ;
+    package CYGPKG_IO_CAN current ;
+    package CYGPKG_DEVS_CAN_LOOP current ;
+};
+
+cdl_component CYGPKG_DEVS_CAN_LOOP_CAN0 {
+    user_value 1
+};
+
+cdl_component CYGPKG_DEVS_CAN_LOOP_CAN1 {
+    user_value 1
+};
+
+cdl_option CYGOPT_IO_CAN_TX_EVENT_SUPPORT {
+    user_value 1
+};
+
+cdl_option CYGOPT_IO_CAN_SUPPORT_NONBLOCKING {
+    user_value 1
+};
+
+cdl_option CYGOPT_IO_CAN_SUPPORT_CALLBACK {
+    user_value 1
+};
+
+cdl_component CYGOPT_IO_CAN_SUPPORT_TIMEOUTS {
+    user_value 1
+};
+
Index: tests/can_callback.c
===================================================================
RCS file: tests/can_callback.c
diff -N tests/can_callback.c
--- /dev/null	1 Jan 1970 00:00:00 -0000
+++ tests/can_callback.c	24 Aug 2007 13:44:20 -0000
@@ -0,0 +1,241 @@
+//==========================================================================
+//
+//        can_callback.c
+//
+//        CAN driver test of callback on event
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s):     Uwe Kindler, Alexey Shusharin
+// Contributors:  Uwe Kindler, Alexey Shusharin
+// Date:          2007-08-23
+// Description:   CAN driver test of callback on event
+//####DESCRIPTIONEND####
+
+
+//===========================================================================
+//                                INCLUDES
+//===========================================================================
+#include <pkgconf/system.h>
+
+#include <cyg/infra/testcase.h>         // test macros
+#include <cyg/infra/cyg_ass.h>          // assertion macros
+#include <cyg/infra/diag.h>
+
+// Package requirements
+#if defined(CYGPKG_IO_CAN) && defined(CYGPKG_KERNEL)
+
+#include <pkgconf/kernel.h>
+#include <cyg/io/io.h>
+#include <cyg/io/canio.h>
+
+// Package option requirements
+#if defined(CYGFUN_KERNEL_API_C)
+
+#include <cyg/hal/hal_arch.h>           // CYGNUM_HAL_STACK_SIZE_TYPICAL
+#include <cyg/kernel/kapi.h>
+
+// Package option requirements
+#if defined(CYGOPT_IO_CAN_SUPPORT_CALLBACK)
+
+//===========================================================================
+//                               DATA TYPES
+//===========================================================================
+typedef struct st_thread_data
+{
+    cyg_thread   obj;
+    long         stack[CYGNUM_HAL_STACK_SIZE_TYPICAL];
+    cyg_handle_t hdl;
+} thread_data_t;
+
+
+//===========================================================================
+//                              LOCAL DATA
+//===========================================================================
+cyg_thread_entry_t can_thread;
+thread_data_t      can_thread_data;
+
+cyg_mutex_t can_lock;
+cyg_cond_t can_wait;
+
+cyg_io_handle_t    hCAN0;
+cyg_io_handle_t    hCAN1;
+
+//===========================================================================
+//                          LOCAL FUNCTIONS
+//===========================================================================
+#include "can_test_aux.inl" // include CAN test auxiliary functions
+
+
+//===========================================================================
+//                           CALLBACK FUNCTION
+//===========================================================================
+
+static void callback_func(cyg_uint16 flags, CYG_ADDRWORD data)
+{
+    if (data == ((CYG_ADDRWORD) hCAN0) && (flags & CYGNUM_CAN_EVENT_RX))
+    {
+        // Wake up thread
+        cyg_cond_signal(&can_wait);
+    }
+}
+
+//===========================================================================
+//                             READER THREAD 
+//===========================================================================
+void can_thread(cyg_addrword_t data)
+{
+    cyg_uint32              len;
+    cyg_can_callback_cfg    callback_cfg;
+    cyg_can_message         tx_msg;
+    cyg_bool_t              wait_res;
+    
+    //
+    // open CAN0 device driver
+    //
+    if (ENOERR != cyg_io_lookup("/dev/can0", &hCAN0)) 
+    {
+        CYG_TEST_FAIL_FINISH("Error opening /dev/can0");
+    }
+    
+    //
+    // open CAN1 device driver
+    //
+    if (ENOERR != cyg_io_lookup("/dev/can1", &hCAN1)) 
+    {
+        CYG_TEST_FAIL_FINISH("Error opening /dev/can1");
+    }
+    
+    //
+    // configure CAN0 callback
+    //
+    len = sizeof(callback_cfg);
+    callback_cfg.flag_mask = 0xFFFF;
+    callback_cfg.data = (CYG_ADDRWORD) hCAN0;
+    callback_cfg.callback_func = callback_func;
+    
+    if (ENOERR != cyg_io_set_config(hCAN0, CYG_IO_SET_CONFIG_CAN_CALLBACK,
+            &callback_cfg, &len))
+    {
+        CYG_TEST_FAIL_FINISH("Error writing config of /dev/can0");
+    }
+    
+    //
+    // transmit message from CAN1 to CAN0
+    //
+    tx_msg.id  = 0x001;
+    tx_msg.ext = CYGNUM_CAN_ID_STD;
+    tx_msg.rtr = CYGNUM_CAN_FRAME_DATA;
+    tx_msg.dlc = 0;
+    len = sizeof(tx_msg); 
+    
+    if (ENOERR != cyg_io_write(hCAN1, &tx_msg, &len))
+    {
+        CYG_TEST_FAIL_FINISH("Error writing message to /dev/can1");
+    }
+    
+    //
+    // Wait CAN0 callback
+    //
+    cyg_mutex_lock(&can_lock);
+    
+    wait_res = cyg_cond_timed_wait(&can_wait, 100);
+    
+    cyg_mutex_unlock(&can_lock);
+    
+    //
+    // If result of wait is a signal operation, test is successed
+    // If timeout - test is failed, because callback_func() hasn't been
+    // called with correct parameters
+    //
+    if(wait_res)
+    {
+        CYG_TEST_PASS_FINISH("can_callback test OK");
+    }
+    else
+    {
+        CYG_TEST_FAIL_FINISH("can_callback test FAILED");
+    }
+}
+
+
+void
+cyg_start(void)
+{
+    CYG_TEST_INIT();
+    
+    cyg_mutex_init(&can_lock);
+    cyg_cond_init(&can_wait, &can_lock);
+    
+    //
+    // create the main thread
+    //
+    cyg_thread_create(4, can_thread, 
+                        (cyg_addrword_t) 0,
+                        "can_thread", 
+                        (void *) can_thread_data.stack, 
+                        1024 * sizeof(long),
+                        &can_thread_data.hdl, 
+                        &can_thread_data.obj);
+                        
+    cyg_thread_resume(can_thread_data.hdl);
+    
+    cyg_scheduler_start();
+}
+
+#else // #if defined(CYGOPT_IO_CAN_SUPPORT_CALLBACK)
+#define N_A_MSG "Needs callback support"
+#endif
+
+#else // CYGFUN_KERNEL_API_C
+#define N_A_MSG "Needs kernel C API"
+#endif
+
+#else // CYGPKG_IO_CAN && CYGPKG_KERNEL
+#define N_A_MSG "Needs IO/CAN and Kernel"
+#endif
+
+#ifdef N_A_MSG
+void
+cyg_start( void )
+{
+    CYG_TEST_INIT();
+    CYG_TEST_NA( N_A_MSG);
+}
+#endif // N_A_MSG
+
+// EOF can_callback.c

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]