This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: flash_olpcx2294_v2 package


Sergei Gavrikov wrote:
> Hello
> 
> This is flash v2 driver for Olimex LPC-X2294 boards on top of strata_v2
> flash driver. Tested on Olimex LPC-H2294 board. Redboot's FIS works fine
> with the driver.
> 
> SYNOPSYS
> 
> 	ecosconfig remove flash_olpcx2294
> 	ecosconfig add strata_v2 flash_olpcx2294_v2 flash
> 
> RFC: I described and the bottom boot blocks in the driver. What is a
> practic, to hide or show it? It seemed for me what I could describe
> flash geometry and as 64 x 0x10000.

I forgot ask about the second commentary. To compile v2 flash driver
it's need to define CYGARC_UNCACHED_ADDRESS macro. I put that in the
targets plf_io.h, but, it seems, that macro can be placed in lpc2xxx
variant, but, where to place the macro? I see 2 places: either var's
hal_cache.h or var_io.h. What will be the best a place? What is your
opinion?

Thanks,

Sergei


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]